Petroleum Geology & Geophysics

1. The key parameter of shale oil resource evaluation: Oil content
2. Organic matter occurrence and pore-forming mechanisms in lacustrine shales in China
3. Pore-based architecture and representative element volume evaluation in artificial sand packs and natural rock cores
4. Control of different occurrence types of organic matter on hydrocarbon generation in mudstones
5. A novel redox indicator based on relative abundances of C31 and C32 homohopanes in the Eocene lacustrine Dongying Depression, East China
6. Organic geochemistry and petrology of source rocks from the Banqiao Sag, Bohai Bay Basin, China: Implications for petroleum exploration
7. The effect of the density difference between supercritical CO2 and supercritical CH4 on their adsorption capacities: An experimental study on anthracite in the Qinshui Basin
8. A novel method of quantitative evaluation and comprehensive classification of low permeability-tight oil reservoirs: A case study of Jidong Oilfield, China
9. Huber inversion-based reverse-time migration with de-primary imaging condition and curvelet-domain sparse constraint
10. A fast space-time-domain Gaussian beam migration approach using the dominant frequency approximation
11. Predicting gas-bearing distribution using DNN based on multicomponent seismic data: Quality evaluation using structural and fracture factors
12. Reflection-based traveltime and waveform inversion with secondorder optimization
13. Fluid discrimination incorporating amplitude variation with angle inversion and squirt flow of the fluid

Petroleum Engineering & Mechanics

1. Advances in enhanced oil recovery technologies for low permeability reservoirs
2. Determination of dynamic capillary effect on two-phase flow in porous media: A perspective from various methods
3. Settling behavior of spherical particles in eccentric annulus filled with viscous inelastic fluid
4. Laboratory investigation on hydraulic fracture propagation in sandstone-mudstone-shale layers
5. Damage of reservoir rock induced by CO2 injection
6. Fracture propagation and induced strain response during supercritical CO2 jet fracturing
7. Quantitative investigation of multi-fracture morphology during TPDF through true tri-axial fracturing experiments and CT scanning
8. Perforation optimization of layer-penetration fracturing for commingling gas production in coal measure strata
9. Shaly detritus embedded epoxy-resin coated proppants
10. Investigation on microscopic invasion characteristics and retention mechanism of fracturing fluid in fractured porous media
11. Permeability measurement of the fracture-matrix system with 3D embedded discrete fracture model
12. Theoretical research on gas seepage in the formations surrounding bedded gas storage salt cavern
13. Effects of modified graphene oxide (GO) nanofluid on wettability and IFT changes: Experimental study for EOR applications
14. Co-adsorption behavior of aggregated asphaltenes and silica nanoparticles at oil/water interface and its effect on emulsion stability
15. A nonlinear creep damage model for gelled waxy crude
16. Investigation on the performance of a helico-axial multiphase pump under slug flow
17. Modeling of kinetic characteristics of alkaline-surfactant-polymerstrengthened foams decay under ultrasonic standing wave
18. Investigation on synergistic deposition of wax and hydrates in waxy water-in-oil (W/O) flow systems
19. Study on the effect of CH4 dissolution on the microstructure of wax crystal in waxy crude oil

Petrochemistry & Chemical Engineering

1. Temperature effect on the dynamic adsorption of anionic surfactants and alkalis to silica surfaces
2. Oil recovery tests with ionic liquids: A review and evaluation of 1-decyl-3-methylimidazolium triflate
3. Catalytic oxidation of pentanethiol on basic nitrogen doped carbon hollow spheres derived from waste tires
4. Measurement of pore diffusion factor of porous solid materials
5. Investigation of kinetics in bioaugmentation of crude oil via highthroughput sequencing: Enzymatic activities, bacterial community composition and functions

Petroleum Economics & Management

1. Primary logistics planning of oil products under the imbalance of supply and demand

1. Rock thin-section analysis and identification based on artificial intelligent technique