设计研究

1. 纯电动汽车坡道起步防溜系统及控制策略的研究 Research on the Anti-Slip System and Anti-Slip Control Strategy of Pure Elect
2. 气缸套网格状激光淬火机床设计 Design of Grid Laser Quenching Machine Tool for Cylinder Liner
3. Arduino在汽车CAN通讯中的应用研究 Research on the Application of Arduino in Automobile CAN Communication
4. 内燃机零部件结构设计及应用研究 Structural Design and Application Study of Internal Combustion Engine Components
5. 汽车智能熄灯保护系统的开发 Development of Intelligent Lights-off Protection System for Automobile
6. 基于Workbench的炭罐电磁阀流量特性分析与优化 Analysis and Optimization of Canister Purge Valve Flow Characteristics Based on Workbench
7. 不同针阀头型对喷油嘴性能的仿真研究 Nozzle Flow Simulation for Different Needle Type
8. 履带车辆双电机耦合驱动机构设计研究 Design and Research of Dual-motor Coupling Drive Mechanism for Tracked Vehicles

工艺技术

1. 铣削加工工艺参数优化研究 Research on Optimization of Milling Process Parameters
2. 论发动机动力单元装配工艺的重要性 On the Importance of Assembly Process of Engine Power Unit
3. 一种车用空压机半自动化装配线的设计应用 Design and Application of Semi-automatic Assembly Line of Air Compressor
4. 内燃机活塞环表面处理技术研究 Research on Surface Treatment Technology of Piston Ring of Internal Combustion Engine
5. 压铆螺母强度及疲劳寿命试验研究 Experimental Research on Strength and Fatigue Life of Self-Riveting Nuts
6. 纸盒式干式喷房下的风平衡探索与实践 Exploration and Practice of Wind Balance under Carton Dry Spray Booth
7. 涡电流分选在报废汽车中的应用研究 Research on the Application of Eddy Current Separation in End-of-life Vehicles
8. 航空用TA18高强钛合金管材弯曲成形技术及研究进展 The Bending Technology and Research Progress of TA18 High-strength Titanium Pipe for Aviation

产品分析

1. 路面加速加载设备转向系统研究 Research on Steering System for Pavement Accelerated Loading Equipment
2. 涡轮增压器叶轮轴心孔断裂故障分析及改善 Failure Analysis and Improvement of the Fracture of the Inner Hole of the Turbocharger Impeller
3. 基于高速转台下的发动机压力测量系统分析 Analysis of Engine Pressure Measurement System Based on High Speed Turntable
4. 试析船舶低速柴油机余热综合回收系统 Analysis of the Comprehensive Residual Heat Recovery System of Ship Low-speed Diesel Engine
5. 浅析发动机动力升级技术 Analysis on the Engine Power Upgrading Technology
6. 内燃机高压油管供喷平衡的动力分析 Dynamic Analysis of the Balance of High Pressure Fuel Pipe Supply and Injection for Internal Combustion Engines
7. 关于某车型转向开关自动回位问题的分析与研究 Analysis and Research on the Problem of Automatic Return of Steering Switch of a Vehicle Type
8. 汽油机涡轮增压器压气机内流场分析和优化措施 Flow Field Analysis and Optimization Measures in Turbocharger Compressor of Gasoline Engine
9. 电控式AMT脱挡机理分析与预防 Analysis and Prevention of the Mechanism of Electronically Controlled AMT Shifting
10. 汽车翼子板抗凹刚度有限元分析 Finite Element Analysis of the Concave Stiffness of Automobile Fender
11. 履带式电动拖拉机动力学分析与整机建模 Dynamic Analysis and Modeling of Tracked Electric Tractor

装备技术

1. 基于NX/Post的五轴数控机床后置处理器研究与开发实践 Research and Development Practice of Post Processor of Five Axis NC Machine Tool Based on NX/Post
2. 基于物联网的数控机床装配物料配送体系研究 Research on NC Machine Tool Assembly Material Distribution System Based on IOT
3. 基于机械模具数控加工制造技术及应用分析 NC Machining and Manufacturing Technology Based on Mechanical Die and Its Application Analysis
4. 关于航天薄壁框架类零件数控加工变形抑制方法的研究 Research on the Suppression of Thin-wall Frame Parts
5. 转子导条滚压涨紧压力计算 Calculation of Rolling Tension Pressure of Rotor-bar
6. 数控技术在汽车底盘生产中的应用研究 Research on Application of Numerical Control Technology in Automobile Chassis Production
7. 高空作业车工作平台速度处理对策研究 Study on Speed Treatment Countermeasures of Working Platform of Aerial Work Vehicle
8. 内燃机车电气控制系统的实践研究 Practical Study on Electric Control System of Internal Combustion Locomotive
9. 液压传动技术在汽车中的应用及发展趋势 Application and Development Trend of Hydraulic Transmission Technology in Automobile
10. 数控车床自动上下料机械手结构设计 Structural Design of CNC Lathe
11. CAD技术与机械制图关键技术分析 Analysis of CAD Technology and Key Technology of Mechanical Drawing

制造工艺

1. 铸造工艺对机械轴承座性能的影响探析 Influence of Casting Process on Mechanical Bearing Housing
2. 某型号柴油机曲轴中心孔修正工艺研究及验证 Research and Verification on Correction Technology of Crankshaft Center Hole of a Diesel Engine
3. 机械加工工艺对汽车零部件精度的影响分析 Analysis of Influence of Machining Technology on Precision of Auto Parts
4. 90°外圆车刀的刃磨技巧及应用研究 Research on Grinding Technique and Application of 90° Cylindrical Turning Tool
5. 基于方向盘注塑模在UG中设计与制造的应用研究 Design of CNC Machine Tool Automatic Production System Based on Cloud Manufacturing
6. 发动机气缸盖数控加工工艺研究 Research on NC Machining Technology of Engine Cylinder Head
7. 汽车发动机曲轴机械加工技术分析 Analysis of Automobile Engine Crankshaft Machining Technology
8. 16缸曲轴中频感应淬火变形的系统解决方案 System Solution of Medium Frequency Induction Hardening Deformation of 16 Cylinder Crankshaft

质量与检修

1. 共轨柴油机限压阀打开故障的研究与分析 Research and Analysis of Pressure Limiting Valve Opening Fault of Common Rail Diesel Engine
2. 工程机械液压系统的现场故障诊断与维修技术研究 Research on On-site Fault Diagnosis and Maintenance Technology of Construction Machinery Hydraulic System
3. 现代汽车维修中电子诊断技术的运用分析 Analysis of the Application of Electronic Diagnosis Technology in Modern Automobile Maintenance
4. 钣金焊接成型的常见问题及其焊接质量控制 Common Problems of Sheet Metal Welding Forming and Its Welding Quality Control
5. 新能源汽车维修与故障诊断技术探究 Research on New Energy Vehicle Maintenance and Fault Diagnosis Technology
6. 比亚迪e5纯电动车无法上电故障诊断与排除 Fault Diagnosis and Troubleshooting of BYD E5 Pure Electric Vehicle Unable to Power on
7. 汽车空调制冷系统常见故障分析及诊断方法研究 Research on Common Failure Analysis and Diagnosis Method of Automobile Air-conditioning Refrigeration System
8. 数控机床的故障诊断及消除措施 Fault Diagnosis and Elimination Measures of CNC Machine Tools
9. 汽车维修中常见问题与优化措施探讨 Discussion on Common Problems and Optimization Measures in Automobile Maintenance
10. 航空发动机涡轮叶片故障诊断分析方法 Analysis Method of Fault Diagnosis of Turbine Blades for Aero Engines
11. 电子诊断在现代化汽车维修技术中的应用研究 Application of Electronic Diagnosis in Modern Automobile Maintenance Technology
12. 燃气轮机气路故障诊断技术探讨 Discussion on Fault Diagnosis Technology of Gas Turbine Gas Circuit
13. 数据融合下的异步电动机故障诊断 Fault Diagnosis of Asynchronous Motor Based on Data Fusion
14. 新能源汽车电气设备的检修研究 Research on Maintenance of Electrical Equipment of New Energy Vehicles
15. 航空发动机试车现场振动测量的干扰与排除 Interference and Elimination of On-site Vibration Measurement for Aeroengine Test Run
16. 汽车底盘构造与维修保养浅析 Analysis on the Structure and Maintenance of Automobile Chassis
17. 汽车发动机冷却系统故障检测与维修 Fault Detection and Maintenance of Automobile Engine Cooling System
18. 新能源汽车常见故障诊断及维修技术分析 Common Fault Diagnosis and Maintenance Technology Analysis of New Energy Vehicles
19. A320大翼油箱燃油溢出原因分析 Cause Analysis of Fuel Overflow of A320s Fuel Tank
20. 探究客车采暖散热器防腐蚀防杂物问题的应对策略 Exploring the Countermeasures for the Problem of Anti-corrosion and Anti-wandering of Heating Radiators in Passenger Cars
21. 汽车发动机检测技术的运用研究 Research on Application of Automobile Engine Detection Technology
22. G1000 NXI系统警告信息排故方法研究 Research on Troubleshooting Method of Warning Information in G1000 NXI System
23. 某国六车型发动机故障灯亮问题分析与处理 Analysis and Solution of CN-6 Vehicles Engine Fault Light
24. 反应堆用应急柴油发电机组冷却水系统故障原因分析及处理 Cause Analysis and Treatment of Failure of Cooling Water System of Emergency Diesel Generator Set for Reactor
25. 汽车电器系统故障诊断对策及维修方法探讨 Discussion on Fault Diagnosis Countermeasures and Maintenance Method of Automobile Electrical Appliance System
26. 汽车发动机常见故障分析及起动困难研究 Analysis of Common Faults of Automobile Engine and Research on Starting Difficulty
27. 汽车冷却系统的保养与维护 Maintenance of Automotive Cooling System
28. 汽车发动机缸体和缸盖的清洗技术讨论和管理维护 Automobile Engine Cylinder Block and Cylinder Head Cleaning Technology Discussion and Management Maintenance
29. 飞机发动机维修过程中的静电防护分析 Analysis of Electrostatic Protection in Aircraft Engine Maintenance
30. 工程机械液压传动原理、故障诊断与排除 Principle, Fault Diagnosis and Troubleshooting of Hydraulic Transmission of Construction Machinery
31. 柴油机水泵常见故障及处理 Common Fault and Treatment of Diesel Engine Water Pump

企业管理

1. 绿色理念在机械设计制造中的渗透分析 Permeation Analysis of Green Concept in Mechanical Design and Manufacture
2. 机械制造加工设备的安全管理与维修 Safety Management and Maintenance of Mechanical Manufacturing and Processing Equipment
3. 电动汽车技术原理及发展展望 Technical Principles and Development Prospects of Electric Vehicles
4. 现代化机械设计制造工艺及精密加工技术分析 Analysis of Modern Machinery Design and Manufacturing Technology and Precision Processing Technology
5. 基于增程式电动汽车发展现状及趋势研究 Research on Development Status and Trend of Electric Vehicle Based on Incremental Programming
6. 信息时代下高职院校智能网联汽车技术专业发展分析 Analysis on the Professional Development of Intelligent Networked Automobile Technology in Higher Vocational Colleges in the Information Era
7. 机械设备管理信息化建设探析 Discussion on Information Construction of Mechanical Equipment Management
8. 电动汽车充电桩电能计量中的问题分析 Analysis on Problems in Electric Energy Measurement of Electric Vehicle Charging Pile
9. 刍议数据分析在发动机装配线产能提升中的应用 Discussion on the Application of Data Analysis in the Increase of Engine Assembly Line Capacity
10. 基于冶金设备管理与维修技术的要点分析 Analysis of Key Points Based on Metallurgical Equipment Management and Maintenance Technology
11. 关于提高机械设计制造及其自动化的有效途径探讨 Discussion on Effective Ways to Improve Mechanical Design, Manufacturing and Automation under the Background of the New Era
12. 船舶柴油发动机的维护现存问题及完善对策 Existing Problems and Improvement Countermeasures of Marine Diesel Engine Maintenance
13. 机械制造中自动化技术的应用探究 Research on the Application of Automation Technology in Machinery Manafacturing
14. 基于重型柴油货车排放治理的探讨 Discussion on Emission Control of Heavy Diesel Truck
15. 基于新环境下汽车维修的改进思想与策略探索 Exploration on Improvement Ideas and Strategies of Automobile Maintenance Based on the New Environment
16. 数控加工技术在机械加工制造中的应用 Application of CNC Machining Technology in Mechanical Manufacturing
17. 机电一体化工程技术的应用及发展趋势分析 Analysis on the Application and Development Trend of Mechatronics Engineering Technology
18. 造船精度管理关键问题及对策 Key Problems and Strategies of Shipbuilding Precision Management
19. 汽车零配件制造用机械保养分析 Analysis of Mechanical Maintenance for Auto Parts Manufacturing
20. 模具工程的智能化发展探究 Research on Intelligent Development of Die and Mould Engineering

技术创新与应用

1. 传感器在汽车电子控制系统中的应用 Application of Sensor in Automotive Electronic Control System
2. 机器人装配作业轨迹规划研究 Research on Trajectory Planning of Robot Assembly Operation
3. 绿色设计法在机械设计制造中的应用 Application of Green Design Method in Mechanical Design and Manufacture
4. 基于CATIA DMU的玻璃升降系统运动仿真与设计优化 Motion Simulation and Optimization of Glass Lifting System Based on CATIA DMU
5. 动力电池总成装调平台的单体电池均衡性测试 Single Battery Balance Test for Power Battery Assembly Installation Platform
6. 基于三菱FX3U PLC切线机控制系统设计 Design of Cutting Machine Control System Based on Mitsubishi FX3U PLC
7. PLC技术在机电自动化控制中的应用探究 Application of PLC Technology in Electromechanical Automation Control
8. 浅析电子控制制动系统在挂车上的应用 Application and Research of Electronic Control Braking System on Trailer
9. 新能源汽车动力蓄电池梯次利用的相关探讨 Discussion on Echelon Utilization of Power Batteries of New Energy Vehicles
10. 改进的萤火虫算法在双缸同步控制系统中的应用 Application of Improved Firefly Algorithm in Double Cylinder Synchronous Control System
11. 基于油电混合动力技术在无人机中的应用 Application of Hybrid Electric Technology in UAV

综合

1. 1+X证书制度下汽车运用与维修技术专业实训资源建设路径 Construction Path of Training Resources for Automobile Application and Maintenance Technology Specialty under 1+X Certificate System
2. 基于混合教学法的汽车电气课程教学改革探究 Research on Teaching Reform of Automobile Electrical Course Based on Mixed Teaching Method
3. 项目教学法在工程训练数控铣床实践教学中的探索 Exploration of the Project Teaching Method in the Engineering Training Practice Teaching of CNC Milling Machine
4. “六步法”在工作过程一体化课程中的应用 Application of the "Six-step Method" in the Integrated Work Process Course
5. 汽车运用与维修专业现代学徒制岗位职业能力探析 An Analysis of Vocational Ability of Modern Apprenticeship in Automobile Application and Maintenance
6. 汽车检修实训台架与教学任务匹配研究 Study on Matching of Automobile Maintenance Training Platform and Teaching Task
7. 探析机械零件数控车削加工理实一体化课程开发 Development of the Integrated Course of NC Turning of Mechanical Parts
8. 船舶轮机系统虚拟仿真实验平台建设 Construction of Virtual Simulation Experiment Platform for Marine Engineering System
9. 《工业机器人操作与编程》项目化教学设计 Project Teaching Design of Industrial Robot Operation and Programming
10. VR在“1+X”工业机器人操作与运维培训中的应用 Application of VR in Operation and Maintenance Training of "1+X" Industrial Robot