Dehydrocoupling of boranes with amines using a scandium catalyst

Yang Wang,Pengfei Xu,Xin Xu

Key Laboratory of Organic Synthesis of Jiangsu Province,College of Chemistry,Chemical Engineering and Materials Science,Soochow University,Suzhou 215123,China

Keywords:Borane Aminoborane Dehydrocoupling Scandium β-H elimination

ABSTRACT The scandocene alkyl complex (C5Me5)2ScCH2SiMe3 was found to be an efficient catalyst for the dehydrocoupling of the non-cyclic boranes,dicyclohexylborane and thexylborane,with amines under mild conditions.The reactions afforded the corresponding aminoboranes in high yields with good functional group tolerance.The stoichiometric reaction of scandium alkyl with amine led to the isolation of a scandium amide complex,which was shown to be an active species during the catalysis.Although a boranecoordinated scandium hydride was also obtained from the stoichiometric experiment,it was not involved in the catalytic cycle.In addition,kinetic studies provided insight into this intermolecular dehydrogenation reaction.

Aminoboranes containing a B-Nσbond are an important class of compounds that are used to construct novel BN-based polymeric materials [1].In organic synthetic chemistry,they also serve as efficient aminoboration reagents for a variety of unsaturated molecules,e.g.,isocyanates [2],carbodiimides [3],aldehydes [4],enones [5]and alkynes [6].Primary aminoboranes have also been explored as ligand precursors to stabilize highly-reactive low-coordinated metal complexes by taking advantage of theπinteractions between the lone pair of electrons on nitrogen and the emptyporbital of boron [7].Thus,the development of an efficient method to synthesize aminoboranes is of great significance.

In early reports,aminoboranes were obtained through cleavage of Si-N or Sn-N bonds by boranes or haloboranes [8].Conventional salt elimination reactions of lithium amides with BCl3also provided the target compounds [9].The selective hydroboration of imines provides an atom-economic pathway to obtain aminoboranes [10].Recently,dehydrogenative coupling of amines and boranes to aminoboranes has emerged and drawn increasing attention because it employs readily-available starting materials and releases H2as the only side product.Although it was reported that the dehydrogenation of amines and boranes occasionally occurs under catalyst-free conditions [11],the reactions can be significantly promoted using a suitable catalytic system.Hill and coworkers disclosed that aβ-diketiminato magnesium butyl complex 1 (Fig.1) enabled the dehydrocoupling of pinacolborane (HBpin)or 9-borabicyclo[3.3.1]nonane (9-BBN) with a range of amines [12].Roeskyet al.prepared an aluminum dihydride 2 that catalyzed the dehydrocoupling of boranes and amines [13].Alkali metal (Li,Na and K) hexamethyldisilazides 3 were also found to be active catalysts for such dehydrogenation reactions by Panda’s group [14].Poweret al.used group 14 tin(II) methoxides 4 for catalytic dehydrocoupling reactions [15].However,the substrate scope of boranes in all of the above dehydrogenation reactions was limited to cyclic secondary boranes,i.e.,HBcat (catechol borane),HBpin,and 9-BBN,and most of the above catalysts exhibited only low to moderate activities.

In our previous work,we demonstrated that the scandocene alkyl complex Cp∗2ScCH2SiMe3(5,Cp∗=C5Me5) [16]was a highly efficient catalyst for the dehydrogenation of dimethylamine-borane to cyclic borazine [17].Mechanistic studies indicated that rapidβ-H elimination to the corresponding scandium hydride played a crucial role in the catalytic reaction.Encouraged by this result,herein,we further investigated scandocene alkyl complex 5 for the intermolecular dehydrocoupling of boranes and amines.Gratifyingly,non-cyclic and primary boranes were successfully applied for the first time,affording a new family of aminoboranes under mild conditions.A plausible mechanism was also proposed based on the isolation and characterization of catalytic intermediates from the corresponding stoichiometric reactions.

We initially examined the reaction of a non-cyclic secondary borane,dicyclohexylborane (6,HBCy2),with aliphaticnpropylamine 7a in C6D6solution.The reaction rapidly generated a new resonance atδ-0.8 ppm in the11B NMR spectrum,indicating the formation of a Lewis acid-base adduct Cy2BH·H2NnPr that did not undergo self-dehydrogenation for up to 24 h at room temperature.Nevertheless,H2elimination readily occurred and was complete within 15 min at room temperature upon the addition of a catalytic amount of Sc complex 5 (5 mol%).The resulting aminoborane 8a features a broad11B NMR signal atδ45.6 ppm,which is significantly shifted to lower-field,indicating the presence of tricoordinate boron.In1H NMR spectrum,a signal for NH was observed atδ3.67 ppm.The addition of an excess amount of HBCy2did not lead to further dehydrogenation even under relatively harsh conditions (10 h,60 °C).Subsequently,reactions of HBCy2with a variety of amine substrates were investigated under such conditions(5 mol% 5,6/7=1,in C6D6,room temperature;Scheme 1).Detailed isolations and characterizations of corresponding products were provided in Supporting information.

Fig.1.Reported catalysts for the dehydrocoupling reactions of boranes and amines.

Several aliphatic primary amines were applicable for the dehydrogenation and completely transformed into the expected aminoboranes 8b-8e within a short time (15–40 min).Amines containing oxygen atoms were compatible with the catalyst system.Cyclohexylamine required a long time (4 h) to achieve full conversion to the corresponding aminoborane 8f.Dehydrocoupling reactions were greatly facilitated when using aromatic amines as the substrates,e.g.,the production of 8g-8i.Notably,reaction ofparabromoaniline with HBCy2gave 8h in quantitative yield in only 2 min.The molecular structure of compound 8i was further confirmed by single-crystal X-ray diffraction and showed a planar tricoordinate geometry at boron (for details,see Supporting information).2,6-Dimethylaniline was completely converted into the corresponding dehydrogenated product 8j in a prolonged reaction time(12 h) under heating (80 °C),presumably due to severe steric hindrance.When usingpara-acetylaniline as the substrate,hydroboration of the carbonyl group was preferred.Nevertheless,the dehydrocoupling product 8k was obtained by adding 2 equiv.borane 6.Secondary amines,e.g.,morpholine and tetrahydropyrrole,were also suitable for this reaction,affording 8l and 8m,respectively,albeit under relatively harsh conditions (2 h,80 °C).No dehydrogenation product was observed when treatment of sterically hindered (Me3Si)2NH with HBCy2under the same conditions.

Reactions of primary thexylborane 9 with a wide range of amines were also investigated under the optimized conditions (5 mol% 5,9/7=1,in C6D6,room temperature;Scheme 2).Again,a control reaction of thexylborane withn-propylamine 7a afforded a Lewis acid-base adduct,which did not decompose within 12 h at 60 °C.In the presence of scandium catalyst 5,the resultant adduct rapidly underwent dehydrogenation to form aminoborane 10a.Further dehydrogenation of 10a to form a B=N double bond was not observed,even when reacted overnight at 60 °C.Compound 10a showed a typical tricoordinate borane resonance atδ44.8 ppm in the11B NMR spectrum as a doublet with a1JHBcoupling constant of 126.5 Hz.Increasing the amount of either borane or amine did not alter the reaction outcome.A series of aliphatic and aromatic primary amines was involved and gave the corresponding aminoboranes 10b-10k in a short time.It is noteworthy that cyclic secondary amines generated dehydrogenation products 10l and 10m under mild conditions (5–10 min,room temperature),in sharp contrast to the reactions of HBCy2with secondary amines.A double dehydrogenation product 10n could be obtained when treatment of 1,4-diaminobutane with 2 equiv.thexylborane.

Scheme 1.Dehydrocoupling of HBCy2 and amines catalyzed by Sc complex 5.Conditions:[6]=0.1 mmol,[7]=0.1 mmol,5 mol% 5.Reactions were performed in C6D6 at room temperature in an unsealed vial.Yields were determined by 1H NMR using ferrocene as an internal standard.aReaction was conducted at 80 °C.b0.2 mmol 6 was used.

Scheme 2.Dehydrocoupling of thexylborane and amines catalyzed by Sc complex 5.Conditions:[9]=0.1 mmol,[7]=0.1 mmol,5 mol% 5.Reactions were performed in C6D6 at room temperature in an unsealed vial.Yields were determined by 1H NMR using ferrocene as an internal standard.aReaction was conducted in the presence of 2.5 mol% 5.bReaction was conducted at 60 °C.

Fig.2.Molecular structures of complexes 11 and 12.Hydrogen atoms (except NH and BH) are omitted for clarity,and ellipsoids are drawn at the 30% probability level.Selected bond lengths (˚A) and angles (deg):11:Sc-N,2.0112(16);N–C,1.453(2);Sc-N-C,147.42(14);12:Sc1-H1A,2.02(1);Sc1-H1B,1.97(1);B1-H1A,1.24(1);B1-H1B,1.28(9);H1A-Sc1-H1B,53.8(8);H1A-B1-H1B,91.6(13).

Scheme 3.Preparation of complexes 11 and 12.

To gain further insight into the Sc-catalyzed dehydrocoupling reactions,several stoichiometric reactions were conducted.The reaction of Sc alkyl complex 5 with an equimolar amount of amine CyNH2gave the expected Sc amide complex 11 in 92% yield(Scheme 3) with the release of SiMe4.Complex 11 was comprehensively characterized by NMR spectroscopy,elemental analysis,and single-crystal X-ray diffraction (Fig.2).The bond length of Sc1-N1 was found to be 2.0112(16) ˚A,which was comparable to those of previously-reported complexes containing Sc-NHR moieties [18].Further reaction of complex 11 with 1 equiv.of HBCy2rapidly yielded the dehydrocoupling product 8f and a new species with a11B NMR signal atδ8.0 ppm.In addition,the unreacted complex 11 was also detected in a 1:1 ratio with 8f in the reaction mixture,suggesting that 2 equiv.of HBCy2were required for this reaction.The new species was finally isolated in 65% yield and identified as the HBCy2coordinated scandium hydride 12 (Scheme 3)by single-crystal X-ray diffraction.The molecular structure of complex 12 was shown in Fig.2.Hydride atoms were located in a Fourier difference map and refined with isotropic displacement parameters.Two hydride ligands were bound to the metal center with bond lengths of 1.97(1) ˚A and 2.02(1) ˚A,respectively.The Sc…B distance was found to be 2.634(2) ˚A,which is significantly longer than those in previously-reported scandium tetrahydridoborate complexes [19].It is noted that the three-component reaction of scandium alkyl complex 5,CyNH2,and HBCy2also led to identical results.Therefore,it is likely that the scandium amidoborane intermediate 12′was formed initially as in our previous case[17],which underwent rapidβ-H elimination to afford scandocene hydride and aminoborane.The resultant metal hydride was highly reactive and thus immediately trapped by hydroborane.Unsuccessful isolation of complex 12′presumably resulted from the sterically bulky amino group.

Both isolated complexes 11 and 12 were employed as catalysts for the reaction of HBCy2with CyNH2under our typical conditions.Scandium amide complex 11 showed comparable activity to that of parent complex 5.In contrast,the catalytic activity drastically decreased when using complex 12 as a catalyst,indicating that 12 should not be included in the catalytic cycle of Sc-catalyzed dehydrocoupling reaction.In addition,the reaction of HBCy2with CyNH2in a 10:1 molar ratio catalyzed by scandocene alkyl complex 5 did not yield any dehydrocoupling product under the same conditions,suggesting that excess borane inhibited the reaction.These experimental results were consistent with those observed in main-group metal Mg-catalyzed dehydrocoupling of boranes with amines [12].

Kinetic studies of the dehydrocoupling reaction of HBCy2with CyNH2were also conducted by varying the catalyst loading from 3 mol% to 9 mol% and monitored by NMR spectra (for details,see Supporting information).As shown in Fig.3,plots of the substrate conversionversusreaction time for all trials generated straight lines,indicating a zero-order kinetic behavior.Based on these results,a first-order dependence on catalyst 5 was observed (Fig.3).Replacement of HBCy2with deuterated DBCy2resulted in a significant kinetic isotope effect (KIE) of 4.0 (Fig.S88 in Supporting information).In contrast,deuterated amine only afforded a KIE of 1.2.These results suggested that B-H bond cleavage might be involved in the rate-determining step.

Based on the above observations and previous literature reports,a plausible mechanistic framework for the Sc-catalyzed dehydrocoupling of boranes and amines is shown in Supporting information (Fig.S89 in Supporting information).The reaction of Sc alkyl complex 5 with an amine gave a Sc amide complex with the release of SiMe4,which easily reacted with borane through N-B and Sc-H interactions to form a Sc amidoborane intermediate.Rapidβ-H elimination then occurred to produce the aminoborane product and Sc hydride.Finally,the dehydrogenation of Cp∗2ScH with an amine produced Sc amide to complete the catalytic cycle.Alternatively,Sc hydride species could be also trapped by hydroborane.

Fig.3.Plot of [Cy2BH]t /[Cy2BH]0 versus time at various catalyst loadings.Standard substrate concentration (0.67 mol/L):3 mol% 5 (black squares, y=-0.0017x + 0.998, R2=0.998);5 mol% 5 (red dots, y=-0.0043x + 0.992,R2=0.997);7 mol% 5 (blue diamonds, y=-0.0056x + 0.934, R2=0.994);9 mol%5 (green triangles, y=-0.0080x + 0.967, R2=0.995).Inset:first-order plot for [5].

In summary,the catalytic dehydrocoupling of non-cyclic boranes,i.e.,dicyclohexylborane and thexylborane,with a wide range of amines has been achieved for the first time by using a scandocene alkyl complex under mild conditions.The reactions provided a new family of aminoboranes with a high atom economy and broad substrate scope.Mechanistic studies,including stoichiometric and kinetics experiments,indicated that a scandium hydride derived from theβ-H elimination of the corresponding metal amidoborane played a critical role in catalysis.Exploration of the applications of such aminoboranes in synthetic chemistry is in progress.

Declaration of competing interest

The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.

Acknowledgment

This work was supported by the National Natural Science Foundation of China (No.21871204).

Supplementary materials

Supplementary material associated with this article can be found,in the online version,at doi:10.1016/j.cclet.2021.05.041.