APP下载

Numerical simulation of subsonic and transonic flow flieds and aerodynamic characteristics of anti-tank intelligent mine

2015-03-03WANGYanZHOUChunguiWANGZhijun

关键词:王志军中北大学反坦克

WANG Yan, ZHOU Chun-gui, WANG Zhi-jun

(College of Mechatronic Engineering, North University of China, Taiyuan 030051, China)

王 妍, 周春桂, 王志军

(中北大学 机电工程学院, 山西 太原 030051)



Numerical simulation of subsonic and transonic flow flieds and aerodynamic characteristics of anti-tank intelligent mine

WANG Yan, ZHOU Chun-gui, WANG Zhi-jun

(CollegeofMechatronicEngineering,NorthUniversityofChina,Taiyuan030051,China)

Anti-tank intelligent mine is a kind of new intelligent anti-tank bomb relying on high precision detector. It can effectively capture and damage targets with wind resistance coefficient and other factors affecting its flight characteristics under consideration. This article is based on the three-dimensional model of intelligent mine. To analyze its subsonic and transonic flow fields and the change law of aerodynamic force factor with the growth of the angle of attack, computational fluid dynamics software is used for intelligent mine flow field numerical calculation and the change law of pressure center. The results show that the large drag coefficient is conducive to the stability of scanning. Drastic changes of the flow field near the intelligent mine will disable its scanning movement. The simulation results can provide a reference for scanning stability analysis, overall performance optimization and appearance improvement.

anti-tank intelligent mine; flow flied; aerodynamic characteristics; numerical simulation

Anti-tank intelligent mine is a kind of new smart ammunition. After the intelligent mine is laid into battle area, when the scanning device on the mine body detects tanks marching in recognition zone, transmitting device will shoot out intelligent mines aiming at the weakest part of the target.

Intelligent mine usually has two components: mine body and scanner, during the aerodynamic characteristics study[1]. The latter is fixedly connected with the body. Shaped charge liner and initiating explosive device are in the head of intelligent mine. The body is simplified as a cylindrical and scanner is simplified as a cube.

Anti-tank intelligent mine technology development is the common effort of scholars at home and abroad. Western countries have adopted high technologies to upgrademine it for larger fight radius, farther distance and better effect. YIN Jian-ping, et al. analyzed vulnerability of tank from the perspective of kill efficiency of intelligent mine[2-5]. ZHANG Yong-sheng, et al. determined the optimum operational time and place according to target speed and target distance with the intelligent mine[6-8]. CHANG Bian-hong, et al. changed initial conditions, mine body mass and shell parameters by means of simulation software to discuss their influence on intelligent mine flight process[9-10]. LIU Ji-dong, et al. evaluated combat effectiveness of intelligent mines exchanging information with other systems[11]. YIN Jian-ping has found that multiple explosively formed penetrator (MEFP) warhead technology used in intelligent mine can improve the effect of battle on cluster tanks and armored vehicles[12].

But there is few research about anti-tank intelligent mine aerodynamic parameters and flow field analysis. Considering that the kill radius of 100-200 m and scanning speed of 20-100 m/s may not meet mobility requirements of future standardized battle, flight velocity, sweeping speed and flight stability larger improvement. Therefore, three-dimensional model based on typical anti-tank intelligent mine is used to obtain flow field and aerodynamic characteristics at different angles of attack, and then what angle of attack can influence stability of intelligent mine in flight is discussed. Speed range is Mach number of 0.13-1.0.

1 Calculation model

1.1 Geometric model

Intelligent mine while flying head down generally has small slenderness ratio. The head is flat or blunt. Mine body is a cylinder. This study uses short cylinder (slenderness ratio of 0.8) as geometric model of the body, regardiess of the internal components such as shaped charge liner, fuse, etc. The shape of the intelligent mine is presented in Fig.1.

Fig.1 Shape of intelligent mine

The length(x) of the cube computational domain is 25 times as long as the intelligent mine diameter, the width(y) is 20 times as long as the length of the intelligent mine and the height(z) is 20 times as long as the diameter. Then the computational domain is divided into two layers. The model is located at the center of the inner computational domain. Unstructured grids of 780 000 are used. Mine body surface grid is shown in Fig.2.

Fig.2 Local grid of mine body

The grid quality report is showed in Fig.3.

Fig.3 Grid quality report

1.2 Calculation model

The simulation assumes that the intelligent mine flies without rotational speed. We chose density based explicit solver as basic solver. Boundary of half model calculation domain adopts pressure far field. If aerodynamic coefficients converge to a stable state, the results converge without setting residual convergence criteria for each equation. Since this case mainly discusses the flow field around mine from subsonic to transonic, Spalart-Allmaras (S-A) single equation model which is an equation about eddy viscosity variable is selected as the turbulence model[13]. S-A equation is

(1)

(2)

(3)

(4)

(5)

g=r+Cw2(γ6-γ),

Thevaluesofconstantsintheformulaeare

2 Flow field and aerodynamic performance of intelligent mine

2.1 Aerodynamic characteristics of intelligent mine

This study calculates the flow field and aerodynamic characteristics with Mach number of 0.13-1.0; The range of angles of attack is from -15° to 15°.

Aerodynamic coefficient curve is depicted in Fig.4. When the airflow velocity is a constant value, drag coefficient changes in shape of a parabola. Since the greater the absolute value of angle of attack is, the greater windward areas of the body and scanner are, drag coefficient increases with the increase of absolute value of angle of attack. After intelligent mine is launched to the air, if the speed is not reduced quickly, it will soon fall to the ground and be broken. Therefore, the larger drag coefficient is indispensable for stable flight of intelligent mine. Simulation results show that drag coefficient will be over 0.6 if Mach number is greater than 0.6, which results in very good movement slowing effect.

Fig.4 Computational aerodynamic force coefficients

Fig.4(b) is lift coefficient changing with the angle of attack. Lift coefficient increases faster within a small angle of attack, and then growth is relatively stable. Lift is small on the whole.

Pitching moment coefficients in Fig.4(c) demonstrat that the range of values forMzis very small and pitching moments of different Mach number have little change.

The fact that the pressure center coefficient decreases with the increase of Mach number indicates that the stability of the intelligent mine gradually reduces.

Fig.5 Pressure coefficients varied with attack angle

2.2 Flow field analysis

Isopiestic line of flow field in the plane of the angle of attack withv=1 Ma andα∈[-15°,15°] is illustrated in Fig.6. Atα= 0°, when the wind blows from the left side of the intelligent mine, a high pressure area is formed from the windward side. After the stream flows around the intelligent mine, a low pressure area is formed in the mine head, the tail and the right respectively for flow expansion. With the increase of attack angle, the windward side high pressure zone moves towards the head, mine-tail low pressure zone expands the scope and integrates with the leeward-side low pressure zone on the right side at the same time. The head low pressure zone disappears. This phenomenon can make intelligent-mine raise head. With the attack angle decreasing, the windward side high pressure area on the left moved to the mine tail and the tail low pressure area disappeared, making the mine bow its head. Furthermore, low pressure area of the head gradually expands and integrats with low pressure area of the right leeward side. External flow field of the body changes greatly, as is demonstrated by the results in Fig.6. The change of the surrounding pressure will undermine flight stability of the intelligent mine, especially when its speed increases.

Fig.6 Pressure contours at different angles of attack at v=1 Ma

Figs.7(a)-(c) are velocity contours of the attack angle plane with streamline. Air flow stagnation point is located on the left side of the body. Then air flows along the axis of the body, bypassing the head and the tail. Vortex is formed in the head and the tail at attack angle of 0°. A small vortex appears when the airflow just bypasses the head at attack angle of 15°, while it appears when the airflow just bypasses the tail at attack angle of -15°.

Fig.7 Velocity contour of attack angle plane with streamline

Airflows converes on the right and form trailing vortex whose rough position is behind of the scanner and right near the head of the mine. So the existence of the scanner damages vortexes of the mine. In the intelligent mine velocity field, the maximum speed occurrs when air just flows around the body, while the minimum speed occurrs after air flows around the body. With the positive and negative angles of attack, the flow velocity is 1.5 times greater than the speed of sound, forming the shock wave in the head and the tail[14].

Fig.8 shows that flow separation occurs as air flows around two-thirds of the mine body contour, a series of vortexes forming in the leeward side.

Fig.8 Three-dimensional flow chart of smart ray

3 Conclusion

This paper discusses the influenceof the change of attack angle on the aerodynamic characteristics of the anti-tank intelligent mine. Numerical calculation results can reflect the aerodynamic characteristics of the intelligent mine to some extent and provide basis and reference for further improvement and optimization of intelligent mine steady-state scanning platform. There is a need for a systematic wind tunnel experiment, combining with numerical simulation method to study the aerodynamic characteristics of the anti-tank intelligent mine.

[1] YIN Jian-ping, WANG Zhi-jun. Ammunition theory. Beijing: Bejing Institute of Technology Press, 2008.

[2] YIN Jian-ping,WANG Zhi-jun. Kill model on MEFP intelligent mine attackingto tank top armor. Journal of Projectiles Rockets, Missiles and Guidance, 2002, 23(2): 137-139.

[3] YIN Jian-ping, WANG Zhi-jun. The analysis by contrast on two ki11 model of MEFP intelligent mines attacking to tank top armor. Journal of Projectiles Rockets, Missiles and Guidance, 2004, 24(1): 49-51.

[4] YIN Jian-ping, ZHANG Hong-cheng, WANG Zhi-jun, et al. Damage effectiveness evaluation for intelligent mine based on grey system theory. Fire Control and Command Control, 2013, 38(3): 41-44.

[5] YIN Jian-ping,WANG Zhi-jun. Influence of initiation ways on killing probabilities of intelligent mine warhead. Journal of PLA University of Science and Technology (Natural Science Edition), 2010, 11(5): 512-516.

[6] ZHANG Yong-sheng, MA Xiao-qing, LIN Yong-sheng. Analysis on the best shooting point of anti-tank intelligent mine. Journal of Projectiles Rockets, Missiles and Guidance, 2004, 24(4): 33-35.

[7] ZHANG Yong-sheng, LI Yin-liang, ZHANG Pei-jun, et al. The analysis research of a scanning mode applicable to intelligent mine. Journal of Projectiles Rockets, Missiles and Guidance, 2014, 34(6): 68-70.

[8] YU Ning, ZHANG You-long, YANG Dong-hai, et al. Modeling and simulation on scanning target using laser fuze of intelligent mine. Acta Armamentar I, 2013, 34(8): 948-952.

[9] CHANG Bian-hong, YIN Jian-ping, WANG Zhi-jun. The influence on intelligent mine mass for its scan trail. Journal of Projectiles Rockets, Missiles and Guidance, 2006, 26(4): 150-153.

[10] CHANG Bian-hong, YIN Jian-ping, WANG Zhi-jun. Orthogonal optimization design of case parameters for intelligent mines. Journal of North University of china, 2009, 30(5): 425-429.

[11] LIU Ji-dong, WANG Zhi-jun. Model of queuing theory of antitank intelligent mine-field’s operation efficiency analysis. Journal of North China Institute of Technology, 2005, 26(2): 111-114.

[12] YIN Jian-ping, WANG Zhi-jun. Study on applying explosively formed penetrator warhead technology for intelligent mine. Journal of Projectiles Rockets, Missiles and Guidance, 2005, 25(3): 49-50.

[13] YU Yong. Fluent introductory and advanced tutorial. Beijing: Beijing Institute of Technology Press, 2011.

[14] ZHOU Zhi-chao, ZHAO Run-xiang, HAN Zi-peng, et al. The aerodynamic shape design and aerodynamic characteristics analysis of terminal sensing submunition. Acta Aerodynamica Sinica, 2012, 31(1): 15-21.

反坦克智能雷亚、跨音速气动特性数值仿真

反坦克智能雷是一种依托高精度探测器件的新型智能反坦克炸弹。 智能雷实现高效捕获、 毁伤目标时, 应考虑风阻系数等因素其飞行特性的影响。 本文基于智能雷的三维模型, 分析了亚、 跨音速智能雷流场以及气动力因数随迎角的增长规律。 应用计算流体力学软件对智能雷外流场进行数值计算, 得到智能雷压心位置的变化规律。 结果显示阻力系数的值比较大, 有利于智能雷维持稳定扫描状态。 智能雷附近剧烈的流场变化可能导致其扫描运动失效。 仿真结果能够作为智能雷扫描稳定性分析、 总体性能优化和外形改良的参照。

反坦克智能雷; 流场; 气动特性; 数值仿真

WANG Yan, ZHOU Chun-gui, WANG Zhi-jun. Numerical simulation of subsonic and transonic flow flieds and aerodynamic characteristics of anti-tank intelligent mine. Journal of Measurement Science and Instrumentation, 2015, 6(3): 264-269. [

王 妍, 周春桂, 王志军

(中北大学 机电工程学院, 山西 太原 030051)

10.3969/j.issn.1674-8042.2015.03.011]

Received date: 2015-05-03 Foundation items: National Natural Science Foundation of China (No.1157229);Graduate Student Education Innovation Project of Shanxi Province (No.2015SY58)

WANG Yan (495082493@qq.com)

1674-8042(2015)03-0264-06 doi: 10.3969/j.issn.1674-8042.2015.03.011

CLD number: TJ51+2.1 Document code: A

猜你喜欢

王志军中北大学反坦克
Effect of interface anisotropy on tilted growth of eutectics:A phase field study
反坦克火箭筒
“陆战王者”的克星:反坦克导弹
柠檬酸辅助可控制备花状银粒子及其表面增强拉曼散射性能
王志军 油画作品
中北大学信创产业学院入选首批现代产业学院
《中北大学学报(自然科学版)》征稿简则
有机相化学镀铝法制备Al/石墨烯复合材料粉末
Numerical Simulation on New Perforator
Research on the Fracture Mechanism of Scored Liner Under Explosive Loading