中南大学学报(自然科学版)2019年总目次

第1期

不同液固动量交换系数模型对颗粒流化行为数值模拟的适应性·········孙铭阳，于传兵，吕东，韦鲁滨(1)

低品位菱镁矿摩擦电选提纯的试验研究·······················赵小路，王海锋，李垚，杨金山，彭真(9)

页岩焙烧提钒过程中钾物相转化研究····································杨鑫龙，冯雅丽，李浩然(15)

基于石灰石法脱硫浆液的 K2S2O8氧化 Hg0性能······················田立江，刘秉坤，李杰，沈晓玲(23)

Ti6Al4V合金粉末高温高压成形过程中粉固界面及其耦合变形研究·················································季晨昊，郎利辉，黄西娜，孟凡迪，徐文才(29)

银/稀土元素/碳微球抗菌剂的制备与表征····包芮于，余燕敏，张琴琴，王兴欣，陈慧英，夏建新，李华(38)

基于位姿误差补偿的全电脑凿岩台车钎杆定位算法·········夏毅敏，李正光，罗建利，曾桂英，马劼嵩(44)

无同步齿轮液压振动锤系统的马达泄漏特性及耦合同步条件···········罗春雷，唐志清，莫鑫，陈珍颖(52)

基于并联机构的车载担架及振动半主动控制研究·····················高翔，牛军川，沈国栋，田莉莉(59)

基于冗余并联机构的高性能机床设计与分析···························赵福群，郭盛，徐梓淳，李典(67)

基于 Prophet框架的银行网点备付金预测方法······························李丽萍，段桂华，王建新(75)

基于轧制界面表面粗糙度特征的板带轧机混合润滑特性研究·····王桥医，朱媛，过山，张秋波，池冰冰(83)

网络化牵引控制系统H∞采样控制及其应用····························陈刚，王信，罗昌胜，肖伸平(91)

锚具失效后后张法预应力简支梁试验研究·······························周凌宇，薛宪鑫，尹国伟(100)

砂土中松动土压力及松动区位移破坏形式的试验研究·······陈其志，郭生根，徐长节，梁禄钜，刘兴旺(108)

抗滑桩-加筋土挡墙组合支挡结构开发··································曹文昭，郑俊杰，薛鹏鹏(118)

碾压混凝土的动态力学特性分析及损伤演化本构模型建立··············张社荣，宋冉，王超，魏培勇(130)

水泥改良泥质板岩粗粒土的静力特性·····································刘雨，陈俊桦，朱自强(139)

冲击波和预制破片联合作用下 H 型钢柱抗爆设计·····································田力，张浩(146)

基于Prandtl破坏模式的吸力式沉箱基础抗拔承载力极限分析上限解··朱文波，戴国亮，龚维明，赵学亮(158)

基于泥层高度的耙架扭矩力学模型及机理分析···············杨莹，吴爱祥，王洪江，钟常运，程海勇(165)

膏体料浆管道输送中粗骨料颗粒运动规律分析·············颜丙恒，李翠平，吴爱祥，王洪江，侯贺子(172)

多破坏模式和二次受力影响下 FRP 加固 RC 梁抗弯承载力·························方圣恩，武棒棒(180)

再生混凝土-钢筋黏结锚固可靠度设计·····························杨海峰，陈卫，张天宝，蒋家盛(189)

基于渗流应力耦合的基坑开挖受力特性及其对邻近地铁隧道的影响·······································黄戡，杨伟军，马启昂，安永林，李依，周经伟，邱朗(198)

酸雨入渗对膨胀土抗剪强度的影响及微观试验研究·················常锦，杨和平，肖杰，毛瑞，童超(206)

微小圆管和方管中 H2/空气燃烧极限的比较与分析································范爱武，袁自力(214)

基于动态水力平衡的集中供热系统二次管网节能优化调节方法研究····周璇，刘国强，王晓佩，闫军威(220)

复合轨枕有砟轨道动力性能试验研究·················赵振航，沈毓婷，魏强，江万红，耿浩，李成辉(234)

四轮独立驱动电动汽车行驶状态级联估计·······················陈特，陈龙，蔡英凤，徐兴，江浩斌(241)

第2期

不同转速率下球磨机内钢球的碰撞研究·······李腾飞，林蜀勇，张博，张家明，焦芬，覃文庆，张雁生(251)

湿法炼锌厂针铁矿渣的表征···········································李玉虎，高禄鹏，刘志宏(257)

双层阳极微生物燃料电池系统降解偶氮染料及同步产电···········汪莲，曹羡，冯羽中，张毅，李先宁(264)

纤维增强金属层板零件充液成形过程及工艺分析···········刘世琛，郎利辉，关世伟，绳斯佳，曾一畔(272)

前体物和诱导子对内生真菌CH1产乙基长春胺的影响···················任娜，刘佳佳，杨栋梁，徐士杰，栾明宝，赵娜娜，彭樱子，吴义强，袁光明(279)

双重螺旋法齿面分区修形对降低安装误差敏感性的影响·····················严宏志，吴顺兴，肖蒙(286)

交流电力测功机运行状态的混沌预测与异常诊断····················钟定清，王艾伦，何谦，魏克湘(295)

天然气水合物输送管道的压力损失规律·································徐海良，胡文港，杨放琼(304)

弛张筛面动态特性数值模拟及参数优化···········武继达，刘初升，王振乾，江海深，邹梦麒，邱文强(311)

基于 OpenFOAM 重力式采样器自由下落姿态数值分析·················马哲，孔丹雅，王胤，翟钢军(321)

蒸馏水中 TC4 合金微动磨损特性····································宋伟，孙璐，景鹏飞，俞树荣(328)

运动单站单基线解模糊定位算法····································郭立民，谢强，陈涛，王梦馨(336)

基于粒子群的改进智能算法在载荷识别中的应用······················谢兵，谢博群，张猛，曲先强(343)

预制表面裂隙砂岩的动态力学特性及破坏模式······················吴浩，赵国彦，梁伟章，王恩杰(350)

基于天线收发距的盾构壁后注浆雷达探测试验研究···胡盛斌，徐国元，马富安，唐甫，容继盘，钟有信(360)

硫化矿石堆自热的混沌特征···················伍智伟，潘伟，吴超，李孜军，李明，刘正洲，冯宴熙(368)

阶段嗣后充填采场结构参数的多目标多属性优化···························兰明，刘志祥，李夕兵(375)

虹吸排水抗淤堵能力模型试验与理论分析··························汪磊，尚岳全，吕俊俊，徐浩迪(384)

桩基施工对邻近既有地铁隧道影响的数值分析······································丁智，张霄(390)

粉砂岩路堑高边坡施工监测与动态设计····························汪益敏，王兆阳，李奇，陶子渝(400)

侧向冲击下方钢管混凝土构件动力响应的参数研究·············蔡健，余瑜，陈庆军，李玉楠，叶嘉彬(409)

冲击荷载作用下岩石压动态和拉动态损伤模型···························谢福君，张家生，陈俊桦(420)

圆钢管 UHPC 短柱轴压承载力与变形能力计算模型··················王震，王景全，刘桐旭，修洪亮(428)

地下破碎矿体数值计算模型的构建及采场结构参数优化·······刘冬，邵安林，金长宇，丁成功，范富泉(437)

饱和粉质黏土动弹性模量影响因素分析及骨干曲线模型研究·····················庄妍，朱伟，张飞(445)

土质边坡降雨入渗深度及饱和区变化规律·····················刘杰，曾铃，付宏渊，史振宁，张永杰(452)

单向拉伸应力状态下沥青混合料强度和刚度特性·········黄拓，漆帅，蒋浩浩，黄谋英，李咪，李亦鹏(460)

烧结冷却废气余热有机朗肯循环发电系统性能分析······················冯军胜，裴刚，董辉，张晟(466)

带弹性分隔板的低雷诺数圆柱绕流尾迹演化特性······························皇甫宇澄，孙志强(474)

超高压喷射条件下非常态燃油缸内喷雾特性···············刘琦，刘云生，陈新传，霍柏琦，欧阳光耀(480)

考虑材料失效准则的吸能装置失效行为与碰撞特性·······冯悦，肖守讷，朱涛，杨冰，阳光武，车全伟(487)

第3期

攀枝花直接还原钛渣的矿物学特征································王伊杰，薛亚洲，潘懋，文书明(497)

钠盐强化某低品位铁矿含碳球团还原机理························钟荣海，黄柱成，易凌云，汉合童(506)

Al2O3对钒钛高炉渣冶金性能的影响及黏度预测模型············梁海丽，冯聪，储满生，唐珏，王挽平(514)

原位水解/熔融扩散法制备钛酸锂/硫复合正极及其在全固态锂电池中的应用········杜英，李劼，刘晋(521)

平面磨削条件下温度阈值对残余应力形成的影响···························温俊，唐进元，郑金超(530)

不同动静载荷组合作用下盘形滚刀破岩机制·······························张桂菊，谭青，劳同炳(540)

基于多相流理论高速动车组齿轮箱密封系统分析·····························张雨，张开林，姚远(550)

混合链式液压调平机构的动力学特性···································康辉梅，朱建新，王石林(557)

双旋翼无人机串级线性自抗扰控制·························张勇，陈增强，张兴会，孙青林，孙明玮(564)

一种基于内外环结构的四旋翼飞行器容错控制方法································郑佳静，李平(572)

用于卷积神经网络图像预处理的目标中心化算法······················董秋成，吴爱国，董娜，冯伟(579)

虚拟数据代理云模型构建及数据布局·················胡志刚，张欣欣，郑美光，常成龙，李佳，杨柳(587)

四川盆地外复杂地质条件区海相页岩气“甜点区”优选：以湘西北地区古生界为例·······················秦明阳，郭建华，黄俨然，焦鹏，刘辰生，郑振华，张良平，郭军，曹铮(596)

巴布亚盆地东部中侏罗统—下白垩统烃源岩评价及勘探建议···············································刘湘，郭建华，刘辰生，旷理雄，李杰，张振(607)

基于时间序列与 GWO-ELM 模型的滑坡位移预测··············廖康，吴益平，李麟玮，苗发盛，薛阳(619)

滑移支座摩阻效应对高速铁路大跨度桥梁梁轨相互作用的影响·············刘文硕，戴公连，秦红禧(627)

动态地下水位变化引起的基坑底抗渗流稳定性计算新方法············章丽莎，应宏伟，王迪，谢康和(634)

动荷载作用下冻结黏土破坏特性试验研究···················栗晓林，王红坚，邹少军，江聪，牛永红(641)

深埋地下硐室破坏模式与围岩压力上限解·······························张道兵，马宗宇，刘智振(649)

基于附面层理论的路基热边界模型······························罗晓晓，俞祁浩，马勤国，张建明(658)

基于井筒-射孔模型的地层破裂压力及起裂角的理论研究·····范勇，赵彦琳，朱哲明，周昌林，张宪尚(669)

干湿循环条件下水泥改良泥质板岩粗粒土的静力特性试验研究···············刘雨，朱自强，陈俊桦(679)

基于受压裂隙开裂准则的损伤模型·······································马秋峰，田静，周天白(687)

全风化花岗岩富水地层注浆治理研究与应用·······························齐延海，李术才，李召峰，张庆松，杨磊，张健，林荣峰，王凯(694)

混凝土结构三维非线性徐变效应分析方法·······························李世伟，杨永清，陈远久(704)

非饱和粗粒土基质吸力与含水率及级配关系试验研究·······何忠明，刘雅欣，曾新发，刘登生，职孟林(712)

球形颗粒垂直管水力提升压力波动特性检测····································关海荣，孙志强(719)

广义一维势中热声制冷微循环的性能分析··········································鄂青，吴锋(726)

含醇汽油的燃烧与排放特性对比试验研究·····················李煜，龚金科，袁文华，伏军，李光明(734)

板式无砟轨道 CA 砂浆黏弹性特征···················任娟娟，李浩蓝，杜威，邓世杰，田根源，巫江(743)

第4期

基于偏移活化能对 SiC 球团干燥进行动态分析·················李建，付晓恒，李军，张玉静，石应杰(753)

辛基羟肟酸在氟碳铈矿表面的吸附机理···············王介良，曹钊，王建英，张雪峰，雷霄，冯宏杰(762)

顶吹浸没搅拌中液相混合过程的可视化·····················张汉，张小辉，邓伟鹏，张广君，闫红杰(771)

可见光条件下铁酸铋还原水中Cr(Ⅵ)效果分析···李伟，张永丽，郭洪光，刘杨，程鑫，唐炜鸿，赵苹菊(780)

基于反冲洗铁泥制备的磁性吸附剂除砷及再生···················曾辉平，尹灿，盛加宝，李冬，张杰(787)

金刚石绳锯用 Fe 基预合金粉代 Co 性能·········································刘志环，张绍和(796)

退火温度对纯钛 TA1 织构及各向异性的影响········张贵华，江海涛，吴波，杨永刚，田世伟，郭文启(806)

锌白铜搅拌摩擦焊接头显微组织与力学性能··········周利，闵婕，雷淑贵，贺文雄，黄永宪，冯吉才(814)

Au-Sn 焊点异质界面的耦合反应及其对力学性能的影响·····朱学卫，韦小凤，黄玉祥，卫启哲，程小利(821)

深海扬矿泵内部非定常流体径向力研究···································赵贺，刘少军，胡小舟(829)

海底天然气水合物水力提升系统参数和提升性能作用规律·················徐海良，胡文港，杨放琼(837)

计入丝间接触的钢丝绳股轴向力学性能半解析法研究··············张曼曼，陈原培，孟凡明，龚宪生(845)

多轴车辆轮桥加载试验台的解耦控制实验研究·······························王慧，赵国超，金鑫(854)

基于新型双功率流差速转向机构的履带车辆转向性能····················石志标，刘江，高峰，曾文(864)

四旋翼直升机的线性自抗扰与非线性 H2/H∞混合控制·················刘俊杰，高强，孙明玮，陈增强(873)

基于免疫调节机制的参数自整定模糊控制器设计···························刘宝，叶会会，蔡梦迪(881)

热定型过程弹力针织物热塑性应变模型研究······················周丽春，刘顺菁，金福江，楚贝贝(892)

基于幅值追踪法的航空电磁波形优化控制···················于生宝，宋树超，许佳男，张嘉霖，陈旭(900)

岩心激发极化实验系统研究···························贾将，柯式镇，张冰，康正明，李君建，孙旭(908)

辽河盆地大洼油田火山岩特征及其测井识别方法·······肖明国，郭建华，焦鹏，郭祥伟，吴诗情，谭慧(915)

装配式 UHPC 防船撞耗能装置的性能·····································周凌宇，濮星旭，卫军(923)

加筋护坡路堤沉降特性及其控制指标研究···········杨果林，段君义，胡敏，罗光财，邱明明，林宇亮(931)

溶浸作用下稀土矿力学弱化规律研究···陈勋，齐炎，尹升华，李希雯，谢芳芳，刘伽伟，陈威，严荣富(939)

粉质黏土隧道超前支护效应试验研究·········李术才，陈红宾，张晓，龚英杰，李会良，丁万涛，王琦(946)

深部地质处置地下实验室花岗岩的加卸荷三轴蠕变试验与分析···································丁炎志，张强勇，张龙云，任明洋，尹相杰，王斌，余光远(957)

裂隙对含孔洞砂岩力学及损伤演化特征的影响·················周军华，杨坤，房凯，赵同彬，邱东卫(968)

考虑荷载与浸水条件的预崩解炭质泥岩变形试验·······陈小薇，曾铃，付宏渊，刘杰，陈少壮，刘大顺(976)

新型双层 CRCP 结构及在城市道路中的应用····························李盛，杨帆，刘萌，陈尚武(983)

低雷诺数开缝圆柱绕流尾迹流场特性··········································邢鹏飞，孙志强(990)

基于改进遗传算法的海上风电场消纳拓扑结构优化模型··············赵东来，牛东晓，杨尚东，梁才(998)

双线桥上CRTS Ⅱ型板式无砟轨道结构涂刷反射隔热涂层影响分析·····································刘学毅，杨吉龙，姜恒昌，康维新，杨荣山，李振庭(1005)

第5期

高压辊磨超细粉碎对钒钛磁铁矿分选的影响··············郭小飞，代淑娟，朱巨建，李丽匣，王洪彬(1013)

多功能铁水包熔化废钢的计算及分析·······························杨光，邓帅，徐安军，戴晓庆(1021)

移动式打磨作业粉尘分布规律及其影响因素·······················蒋仲安，高康宁，陈记合，兰桂(1028)

稀土熔盐渣碳酸钠焙烧转型机理及浸出规律··························杨幼明，李柳，肖敏，牛飞(1035)

均匀化工艺对Al-4.46Mg合金腐蚀和疲劳性能的影响··········································王在玲，邓运来，伍鹏飞，孙琳，戴青松，叶凌英(1042)

晶粒组织对 Al-Zn-Mg 合金抗应力腐蚀性能的影响·········叶凌英，姚学彬，唐建国，李红萍，张新明(1049)

固溶温度对 Ag2205 双相不锈钢组织与性能的影响·······················向红亮，陈盛涛，邓丽萍(1056)

机器人柔弹性仿生电子皮肤研究进展·················邱澜，曹建国，周建辉，江军，王晓玲，缪存孝(1065)

玻纤增强聚丙烯与尼龙 66 模内混合加工成型实验研究···············符亮，蒋炳炎，吴旺青，闵丽萍(1075)

一种新的直齿轮复合修形设计方法···········································杨硕文，唐进元(1082)

大功率高压开关电源变压器的损耗分析及散热控制···黄毅，彭可，王文潮，陈练，董密，邵添，雷佳豪(1089)

基于有限集模型预测的电机模拟器故障电流跟踪方法··············彭涛，刘博，杨超，秦瑞，阳春华(1098)

基于 3D 打印技术的分层凝胶注模制造工艺····························刘恩辰，葛动元，罗信武(1105)

同分布强化学习优化多决策树及其在非平衡数据集中的应用·········焦江丽，张雪英，李凤莲，牛壮(1112)

隧道充填岩溶管道滑移失稳突水机制····························黄震，李仕杰，赵奎，吴锐，钟文(1119)

不同加载速率下岩石红外辐射效应的试验研究·······························周子龙，常银，蔡鑫(1127)

向量式有限元面内逆向转角计算方法······················王双炎，李聪，杨玉龙，庞志成，汤晗青(1135)

不均匀级配砂土渗蚀过程的细观数值模拟························蔡袁强，张志祥，曹志刚，严舒豪(1144)

近爆冲击波和破片复合作用下预应力钢筋混凝土空心板梁的损伤效应分析···········田力，李永欣(1154)

含腐蚀及椭圆度缺陷管道的动态屈曲传播研究·····································李牧之，余建星，余杨，段晶辉，韩梦雪，李杨，于佳晖(1165)

膏体浓密床层孔隙结构剪切演化与连通机理··············焦华喆，王树飞，吴爱祥，王贻明，杨亦轩(1173)

落矿冲击作用下矿柱结构参数优化与稳定性分析···········于清军，李元辉，刘照朋，纪晓飞，彭康(1181)

水力耦合作用下三维中空裂隙扩展模式与材料破坏强度的试验研究·······························李邦翔，朱维申，杨磊，虞松，梅洁，蔡卫兵，张强勇，陈云娟(1192)

活性粉末混凝土梁柱节点抗裂性能试验研究······················鞠彦忠，沈浩，王德弘，郑文忠(1203)

高应力泥质粉砂岩黏弹塑性蠕变模型···············刘新喜，李盛南，徐泽佩，李玉，高学文，王玮玮(1210)

渗透力对新奥法隧道掌子面稳定性的影响·······黄戡，安永林，岳健，曾贤臣，李佳豪，张艺杰，王栋(1221)

橡胶颗粒沥青砂非线性蠕变模型试验研究····················刘浩轩，曾国伟，白凡，吴亮，郑华升(1229)

水泥回转窑物料流动与传热特性数值模拟···························刘彬，周武洲，赵朋程，李瑞(1235)

实度与转动惯量对垂直轴风力机性能的耦合影响···王旱祥，马文龙，于洪栋，张金玲，姚明建，张立军(1244)

乙酸在方解石表面吸附的密度泛函研究·················柴汝宽，刘月田，杨莉，辛晶，徐万里，马晶(1252)

轨道交通周期型声屏障带隙特性及其降噪性能··················易强，王宇航，高鑫，赵才友，王平(1263)

第6期

锡石多金属硫化矿工艺矿物学及磨矿优化·········周文涛，韩跃新，李艳军，孙永升，杨金林，马少健(1271)

利用 V2O5制备氮化钒铁的反应过程及动力学研究·········王斌，李冬，杜金晶，朱军，刘漫博，王欢(1278)

70 t单管 RH 冶金传输行为的数值模拟·································窦为学，雷洪，朱苗勇(1284)

分级混凝过程的效能与影响因素·························杜鹏，李星，杨艳玲，苏兆阳，方晓博(1291)

基于智能算法的预成形模具优化设计···············王梦寒，杨永超，郭涛，王周田，周文武，肖贵乾(1298)

含 BaSO4钴基自润滑复合材料的制备及高温摩擦学性能···········王文杰，崔功军，杨振伟，师睿博(1306)

压缩载荷下织构对冷轧和退火铜板力学行为各向异性的影响·······································王仁可，陈志永，邵建波，肖柱，刘楚明，唐建国(1314)

使用 P204 从甲基磺酸溶液中萃取铟的研究············何静，李杨刚，柳涛，廖方文，陈永明，杨声海(1320)

炉体冷却壁黏结物物相及形成机理······················马恒保，张建良，焦克新，周云花，但家云(1326)

多级组合型大角度变幅机构的动力学特性················朱振新，朱建新，唐博豪，顾林坤，钱奂云(1334)

刚度连续、单调且光滑变化的粗糙界面法向弹塑性接触模型···············肖会芳，孙韵韵，徐金梧(1343)

基于更新 Kriging 模型的双重螺旋法加工齿面的重构方法············邓辰，严宏志，陈义忠，伊伟彬(1351)

油气悬挂缸的力学特性数学模型构建方法··········于子良，杨珏，马源，殷玉明，SUBHASH Rakheja(1357)

轧制参数对楔横轧变截面等内径空心轴晶粒粒径的影响·············余璇，彭文飞，虞春杰，束学道(1364)

基于概率神经网络的电子油门踏板故障诊断····························蒋玉秀，赵晓欢，邓元望(1370)

搜索引擎结果展示效果自动评价方法··········································张辉，马少平(1378)

热管在青藏高原多年冻土区高速公路应用中的适用性评价·············孔森，温智，吴青柏，王大雁(1384)

冻融和干湿作用下表生板岩的劣化行为与机制·······················吴国鹏，谌文武，崔凯，王珮(1392)

考虑岩体完整程度影响的爆破破裂范围······························谢福君，张家生，陈俊桦(1403)

基于 Normal分布的岩石统计热损伤本构模型研究······朱振南，蒋国盛，田红，吴文兵，梁荣柱，窦斌(1411)

基于声发射实验层状砂岩力学特性及破坏机理···刘运思，王世鸣，颜世军，傅鹤林，陈琛，史越，岳健(1419)

尾矿浓密中泥层沉降速度变化及颗粒沉降特性···················侯贺子，李翠平，王少勇，颜丙恒(1428)

锈蚀钢筋混凝土框架地震损伤性能研究·······························刘小娟，蒋欢军，郭子雄(1437)

裂缝长度对盾构隧道管片结构破坏模式模型试验研究·······································刘川昆，何川，王士民，马杲宇，郭文琦，卢岱岳(1447)

爆破振动作用下断层破碎带抗剪强度的劣化规律试验研究··················吴廷尧，周传波，蒋楠(1457)

风化岩地基中玻璃纤维增强聚合物抗浮锚杆体系受力特性数值模拟·················································白晓宇，张明义，匡政，闫楠，贾科科(1466)

微生物驱数值模拟研究进展······················王天源，修建龙，崔庆锋，黄立信，马原栋，俞理(1474)

分裂导线覆冰的数值分析与实验研究························何青，李军辉，张暕，邓梦妍，杜冬梅(1485)

双变量试差算法及其在循环水系统中的应用·····································孟志强，张沛(1492)

考虑辅助停车区约束的中速磁浮列车速度曲线节能优化方法·········································柴晓凤，刘军，赖晴鹰，孟令云，丁文亮，徐亚之(1499)

第7期

添加剂对硫化铜矿生物浸出规律的影响························陈威，尹升华，齐炎，陈勋，王雷鸣(1507)

QCM-D研究淀粉和油酸钠与磁铁矿的吸附机理··谢冬冬，侯英，黄贵臣，陶东平，韩呈，王晓丽，靳达(1514)

异辛酸镍的电化学合成····························杨声海，李为轮，吴彦增，王长红，陈永明(1521)

铜浮渣富集熔炼过程金属分配行为···········肖辉，谢博毅，陈霖，王志雄，刘伟锋，张杜超，杨天足(1527)

镍钴基高温合金的氧化动力学与界面结合性能···········宋正奇，李志强，郑绪东，沈明明，邹俭鹏(1537)

矿渣-钢渣基胶凝材料固砷机理··························鄢琪慧，倪文，高巍，李云云，张钰莹(1544)

镁合金筒形件拉深成形的临界压边力························杨柳，官英平，姚丹，段永川，高安娜(1551)

输入转速波动下斜撑离合器的动态接合特性······严宏志，田昊，朱楚，李智，秦娟，刘建睿，王志标(1558)

深海矿石输送设备工作性能··········································徐海良，饶星，杨放琼(1567)

考虑弹簧应力松弛的高压断路器运动特性·············黎小峰，巫世晶，李小勇，赵灯，李巧全，李星(1575)

新一代高技术宽带钢冷轧机全机组一体化板形控制·····曹建国，江军，邱澜，李艳琳，何安瑞，张勇军(1584)

圆柱齿轮分扭传动系统的均载特性及试验研究···············靳广虎，龙珊珊，高鹏，潘磊，朱如鹏(1592)

基于视觉显著特征的光学与SAR影像快速粗配准方法························华丽，徐川，眭海刚(1602)

多核微处理器体系结构级功耗模型分析·······························陈卓，刘畅，侯申，郭阳(1611)

基于伪高动态范围的图像拼接预处理方法··················吴亮红，孙亮，周博文，张红强，卢明(1619)

东营凹陷陡坡带盐斜229地区沙四上亚段砂砾岩油藏成藏控制因素·············解强旺，王艳忠，操应长，王淑萍，李宇志，王欣，李桥，葸克来，弭连山，郭迎春(1626)

石墨烯在沥青复合材料中的研究现状············张霞，黄刚，周超，袁小亚，贺俊玺，冯曼曼，刘昭(1637)

偏心堆载引起的盾构隧道横向受力理论计算················魏纲，洪文强，魏新江，林心蓓，王立忠(1645)

基于蒙特卡洛和BIM的CRTSⅢ型板式无砟轨道铺设工期仿真············································王卫东，雷晓鸣，杜香刚，王继军，贺小刚(1655)

套筒长度对加筋碎石桩复合地基路堤变形和稳定性的影响·········陈建峰，李良勇，徐超，冯守中(1662)

絮团稠化对全尾砂浓密性能的影响························周旭，王洪江，吴爱祥，曹炎森，牛鹏(1670)

考虑剪切接触与碎屑充填的裂隙渗流模型与数值分析·······························潘东东，李术才，许振浩，杜毓超，施雪松，高斌，王文扬(1677)

拱顶背后空洞影响下非对称连拱隧道结构裂损规律············闵博，张成平，张旭，宫艳萍，元腾飞(1686)

基于U曲线法的半参数模型中正则化参数确定······················周岩，靳奉祥，梁庆华，马德鹏(1696)

冻结方式对预冻甘露醇冰晶粒度分布的影响····························贾颖姣，刘志强，罗春(1704)

超疏水表面液滴冻结初期冻结行为传递特性···································罗倩妮，梁彩华(1712)

一种用于内燃机排气能量回收的新型布雷顿循环系统········周峰，付建勤，刘敬平，唐琦军，朱国辉(1719)

射流温度对高温气体射流控制压缩着火的影响········祝佩，田华，孟相宇，崔靖晨，田江平，隆武强(1729)

考虑不确定性和储能系统的虚拟电厂与能效电厂联合调度优化模型及仿真应用·····················································牛东晓，赵东来，杨尚东，刘龙珠(1736)

基于能量守恒法测试汽车的空气阻力系数·····························平培力，杜伟涛，胡玉梅(1744)

改进bang-bang控制的磁流变阻尼钢弹簧浮置板轨道基频的减振效果··················································韦凯，牛澎波，赵泽明，李怀龙，杜香刚(1750)

第8期

耐受全氟辛酸细菌的筛选及其对胁迫的生理响应········易浪波，柴立元，彭清忠，唐崇俭，周璐璐(1759)

锑酸锂与六氟锑酸锂制备新技术集成······················刘伟锋，唐攒浪，陈霖，张杜超，杨天足(1768)

两段焙烧强化含铼低品位钼精矿的氧化分离························邓琼，范晓慧，甘敏，陈许玲(1778)

一种基于动态电阻测量的铁矿粉同化性检测新方法···钱立新，春铁军，龙红明，李宁，王毅璠，余正伟(1787)

小球藻生长及协同净化畜禽养殖废水研究·························朱中强，何雪，薛梦婷，余冉(1795)

柔性有机硅疏水涂层的制备及其抑菌活性···········沈启慧，单驿轩，连朋亮，刘岩，于东冬，周建光(1802)

基于逆向拟合法的H13钢J-C本构修正模型·······························张静，张松，李斌训(1808)

循环扭转剪切下圆筒内硬球颗粒的致密化行为·····················欧阳鸿武，雷刚，唐昕，孟力平(1816)

泥水盾构刮刀刃型与安装角对刮刀切削性能的影响·····夏毅敏，沈烽，陈松涛，陈鹏，孙旭涛，宁波(1824)

室内动态环境下的移动机器人自主避障策略·························杨明辉，吴垚，张勇，肖晓晖(1833)

齿轮箱浸油润滑流场及温度场仿真分析····················鲍和云，范永，朱如鹏，陆凤霞，靳广虎(1840)

翼缝形状对垂直轴风力机翼型气动性能的影响·················张立军，马东辰，顾嘉伟，江奕佳，米玉霞，赵昕辉，王旱祥，刘延鑫，刘静(1848)

具有直接链路的能量收集认知协作中继网络中断概率分析········罗轶，施荣华，董健，唐锟，王雨婷(1857)

基于固有频率的梁结构疲劳损伤演化规律······································卫军，杜永潇(1866)

高频冲击中心孔岩石损伤模型及试验研究································吴万荣，姚壵，刘智(1876)

各向异性成层边坡的稳定性分析·································罗凌晖，周建，蔡露，温晓贵(1883)

单轴压缩下孔洞砂岩细观破裂演化规律······················赵国彦，王恩杰，吴浩，邱菊，戴怡文(1891)

纵筋锈蚀对钢筋混凝土梁抗剪性能影响的试验研究················黄天立，赵志彦，宋力，王宁波(1901)

各向异性介质中地震波参数反演及其在隧道不良地质预报中的应用···············································何现启，彭凌星，鲁光银，朱自强，高峰(1912)

不同方向冲击加载作用下含裂纹巷道的破坏行为·········周磊，朱哲明，范勇，刘瑞峰，邓帅，董玉清(1921)

含水率对黄土渗气性影响及其微观机理··················刘锦阳，李喜安，郭泽泽，黎澄生，马驰洋(1930)

基于颗粒接触理论的岩石压密阶段本构模型····················马秋峰，秦跃平，周天白，杨小彬(1941)

深埋隧洞三岔口围岩稳定性计算理论·················饶军应，谢财进，赵霞，刘灯凯，聂崇欣，刘宁(1949)

震损可原位修复钢桥墩设计及其抗震性能························吕英婷，郭子雄，刘阳，黄群贤(1960)

脆性岩石应力-应变全过程声学特征演化规律··············张国凯，李海波，王明洋，邓树新，王振(1971)

生物酶改良膨胀土的应力-应变关系···············陈永青，文畅平，方炫强，陈宗辉，孙政，王解军(1981)

全长黏结GFRP抗浮锚杆拉拔特性分析·······················白晓宇，张明义，匡政，王永洪，闫楠(1991)

基于数据驱动的过热蒸汽温度系统模型辨识····························王欢，饶政华，廖胜明(2001)

GDI超高压喷雾撞壁特性的激光可视化··许锴，卫立夏，裴毅强，王晨晰，李翔，李俊启，叶自旺，许贝(2009)

含Cd油菜秆热解实验研究·······················蔡攀，蒋绍坚，彭好义，朱明伟，王凯，王浩，刘僖(2018)

溶液预冻方式与冰晶粒度分布之间的关系························贾颖姣，余云霞，刘志强，罗春(2026)

长短叶片对射流式自吸离心泵性能的影响···············董亮，潘琦，刘厚林，代翠，徐建红，徐海良(2033)

路基冻胀—融化—沉降循环作用下板式无砟轨道受力与变形分析···············································向俊，林士财，余翠英，袁铖，陈林，杨海明(2043)

第9期

铜冶炼含砷废水水热臭葱石沉砷及亚稳态铁物相转化行为···········································张俊，李存兄，魏昶，邓志敢，李兴彬，张鹏(2053)

加热工艺对Nb-Ti微合金化高强钢的影响························梁文，吴润，胡俊，杜涛，尹云洋(2063)

低品位高硫铝土矿脱硅精矿溶出及微观结构演变···吴鸿飞，夏飞龙，李军旗，陈朝轶，徐树涛，张仕恒(2074)

扩散法制备Al2O3弥散强化铜-锡合金粉末及其表征·····················闫志巧，陈峰，刘咏，汪涛(2084)

微流控芯片微通道复制度的表征及在注塑成型中的应用···········闵丽萍，蒋炳炎，朱来余，李湘林(2091)

螺栓固结界面接触刚度的虚拟材料建模························肖会芳，孙韵韵，徐金梧，邵毅敏(2100)

不同轮缘间隙下混流泵旋转失速特性···············平元峰，施卫东，李伟，季磊磊，李恩达，马凌凌(2109)

一种新型并联灌注机器人动力学分析与仿真·····························杨会，房海蓉，方跃法(2118)

机器人化钻锚车钻臂工作空间分析及轨迹规划·························郝雪弟，景新平，张中平，谢勇厚，张境麟，刘冰，梁泽楠，吴淼(2128)

螺纹硬态旋风铣削轴承钢GCr15切屑形貌及特性试验研究·········································何彦，白云龙，李丽，王禹林，李育锋，易力力(2138)

基于模糊聚类方法的S700K转辙机故障诊断··································刘新发，魏文军(2148)

基于量化控制的网络系统稳定性分析······································陈刚，陈云，王炜(2156)

RGB-D与MeanShift相结合的实时目标跟踪························王广龙，田杰，朱文杰，方丹(2163)

基于泛在位置数据的城市道路网精细建模···········邓敏，佘婷婷，黄金彩，刘慧敏，张建国，郑旭东(2171)

基于特征参数的频率域海洋可控源电磁数据反演影响因素分析·················韩波，李刚，刘颖(2184)

道面结构刚度和地基不均匀性对飞机荷载下道基附加应力的影响·········黄博，王宇，赵云，凌道盛(2195)

热处理对冻结砂岩物理力学性质的影响·············金爱兵，吴常贵，赵怡晴，王本鑫，孙浩，赵安宇(2207)

基坑开挖对下卧地铁隧道影响的解析计算方法·····刘建文，施成华，雷明锋，彭立敏，曹成勇，林越翔(2215)

膨润土膨胀力长期衰减特性的数值分析································李晓月，姜昊，徐永福(2226)

板岩质砂土-混凝土界面剪切特性研究···················周怡，彭振斌，尹泉，陈乐求，陈娟，张闯(2233)

方钢管竖向插板加强节点受压承载性能分析················常鸿飞，徐玮，左文康，刘帅鹏，夏军武(2242)

高速铁路连续梁桥横向地震碰撞效应及挡块间隙研究····················杨孟刚，王传坤，乔建东(2252)

混合骨料级配对充填料浆离析的影响··························温震江，高谦，陈得信，王永定(2264)

基坑开挖引起下卧盾构隧道转动与错台变形计算·································魏纲，张鑫海(2273)

加锚砂岩单轴力学特性及屈曲型岩爆控制机制··················王斌，宁勇，冯涛，王卫军，郭泽洋(2285)

强降雨影响下破碎复理岩地层隧道洞口段失稳机理·············高阳，孙浩凯，刘德军，徐飞，张骞(2295)

油菜秆热解过程中重金属形态研究·····················朱明伟，蒋绍坚，付国富，蔡攀，王凯，王浩(2304)

并联冷凝式空气源热泵热水系统研究··························江轶政，曾志勇，毕麟，刘益才(2310)

机车多边形磨耗车轮镟修异常原因分析及改进措施···任德祥，陶功权，刘欢，梁红琴，陈国胜，温泽峰(2317)

液电耦合式车辆可控 ISD 悬架性能分析与试验研究··········杨晓峰，赵文涛，刘雁玲，沈钰杰，颜龙(2327)

第10期

S0生物还原介导的铁矿物厌氧还原过程研究···········夏旭，周雨行，夏金兰，聂珍媛，王娜，杨洪英(2335)

矿渣-电炉还原渣全固废胶凝材料的水化机理···········倪文，李颖，许成文，徐东，姜瑶琪，高广军(2342)

超细焦锑酸钠的制备及粒度调控·························曹升，杨喜云，李计深，徐徽，石西昌(2352)

空气雾化喷嘴雾化机理及影响因素实验分析·······················蒋仲安，许峰，王亚朋，陈举师(2360)

700 MPa级高强钢氧化铁皮高温热变形行为···曹光明，周忠祥，高欣宇，于聪，王皓，李志峰，刘振宇(2368)

多孔BCP支架及其仿ECM涂层对MG63细胞功能的影响·······································陈代远，陈良建，郑景璞，易曼菲，邵春生，张博(2376)

基于相控阵超声导波扫描成像的大曲率油气对焊弯管缺陷检测···················罗更生，谭建平(2385)

横向摆动对深海采矿扬矿管输送特性的影响····························徐海良，饶星，杨放琼(2395)

某型变转速直升机传动系统动力学特性分析·······鲍和云，李丰波，陆凤霞，靳广虎，朱如鹏，邹小筑(2403)

局部剥落故障对滚动轴承接触与振动特性的影响····刘静，唐昌柯，师志峰，王林峰，徐子旦，邵毅敏(2417)

倾斜轴颈滑动轴承混合热弹流研究························王家序，倪小康，韩彦峰，向果，肖科(2425)

新型自协作移动机器人及其力学协调分配方法···························张程煜，郭盛，赵福群(2435)

基于SHEPWM阶段控制的航空电磁发射波形研究····················于生宝，高丽辉，陈楠，黄勇(2446)

固定翼线圈姿态变化对动态和静态响应的影响与校正············朱凯光，王昊，彭聪，张琼，范天姣(2455)

流-固-化耦合条件下硬脆性泥页岩井壁渐进破坏效应探讨······························肖志强，贾善坡，亓宪寅，戴永浩，吕方，贾陆锋，温曹轩(2464)

循环荷载下无砟轨道-桥梁结构体系刚度退化性能·························李龙祥，张燕，赵磊(2481)

螺栓超欠拧对钢桁梁桥节点拼接接头受力的影响···················高强，黄天立，陈龙，冯锡良(2491)

考虑结构表层粗糙度的混凝土桩-黏土界面剪切特性试验研究·····汪优，李奕金，谭伟，汤明明，杜炜(2502)

干湿循环作用对水泥改良泥质板岩土路基动力响应影响的模型试验··········朱自强，刘雨，陈俊桦(2510)

黏弹性结构精细化频域动力分析方法··························盖盼盼，徐赵东，吕令毅，戴军(2520)

梅山铁矿爆破粉尘润湿性能关键影响因素···········王嘉莹，金龙哲，郭敬中，刘建国，王天暘，巩琦(2527)

孔隙介质水泥浆液渗透注浆有效扩散距离试验研究·····张玉，郭豪，陈铁林，王荣鑫，程少振，廖晓东(2536)

超高填方荷载下刚柔组合桩复合地基的加固机理及其优化设计··········································豆红强，俞仰航，聂文峰，王浩，陈雷，张蕊(2552)

单元式无砟轨道板间传力杆设置的计算方法·······················韦有信，杨斌，姜景山，赵振航(2563)

H型垂直轴风力机变桨机理研究进展························张立军，马东辰，胡阔亮，米玉霞，朱怀宝，顾嘉伟，刘静，严强(2572)

用于CNG冷能回收的低温有机朗肯循环系统热力学分析·············李铖灏，曾志勇，陈星宇，李洁(2586)

两级压缩双温空调系统的节能潜力························余磊，任承钦，杨洋，万杨大，王招(2595)

140 km/h高速地铁隧道净空断面面积研究·····························冉腾飞，梁习锋，熊小慧(2603)

轴向载荷下蜂窝填充薄壁锥管的吸能特性·························李本怀，鲁寨军，朱慧芬，许平(2613)

第11期

天然磁黄铁矿机械活化强化除砷技术·········张荥斐，刘屾淼，曹学锋，韩海生，孙伟，成朋飞，王丽(2623)

固体氧化物燃料电池数值仿真模型的建立···························汤水，张茂贵，贾明，刘宇(2633)

铜和锌离子对水热臭葱石沉砷过程的影响·····························张鹏，李存兄，魏昶，楚铭，张俊，邓志敢，李旻廷，李兴彬(2645)

不同碳源作用下厌氧氨氧化耦合多菌系统脱氮效能·····················吕振，钱玉兰，李燕，李亮(2656)

5083P-O和6008-T6铝合金的应变率效应对缓冲器缓冲特性的影响·········································陈书剑，肖守讷，朱涛，缪得祥，杨冰，阳光武(2665)

新型超高强度Ti-20Zr-6.5Al-4V合金热变形行为及热加工图·························聂中奎，杨秋月，张文玮，张雪，杨洪艳，张喜，谭元标，刘文昌(2676)

带缺陷的蜂窝铝道面板平压疲劳特性试验研究····················陈东方，王润唐，许巍，蔡良才(2687)

5052铝合金热拉伸流变应力及实心凸起板锻造成形研究····林启权，王晓伟，董文正，李彦涛，王志刚(2695)

单参数调整的欠驱动吊车防摆定位全过程自抗扰控制·················肖友刚，卢浩，余驿，韩锟(2703)

端盘截齿切削海底块状硫化物载荷特性···································李艳，陆鹏，李钰晴(2712)

应用中国典型道路的道路耐久性试验研究···········龙岩，蒋凌山，熊海林，刘雪强，陈志勇，余智明(2722)

某轿车车门轻量化与疲劳寿命多目标综合优化·······龙岩，蒋凌山，刘雪强，熊海林，陈志勇，钟慧卿(2732)

基于数据挖掘的宽厚板板凸度控制·················曹建国，江军，赵秋芳，何安瑞，李存福，孙旭东(2743)

并联踝康复机器人的系统搭建与运动控制策略·······李剑锋，张子康，张雷雨，董明杰，左世平，张凯(2753)

基于EEMD多尺度样本熵的S700K转辙机故障诊断·····························魏文军，刘新发(2763)

侵入接触型隧道突泥涌水危险性评估的变权-靶心贴近度模型········································李朝阳，王迎超，刘洋，焦庆磊，王密田，张野(2773)

考虑填料与土地基差异性的填方边坡稳定性上限分析········段君义，杨果林，林宇亮，邱明明，申权(2783)

考虑中间主应力的粉砂岩侧向卸荷力学特性试验研究····················马钰沛，李江腾，刘双飞(2792)

基于球面对称设计的离散元细观参数定量确定方法···················彭霞，饶秋华，李卓，张杰(2801)

地铁DTⅥ2扣件弹条力学特性及断裂研究·················陈宪麦，屈郑嘉，陈文韬，管吉波，李岳涛(2813)

基坑降水效应的室内试验研究·································汪旭玮，杨天亮，许烨霜，袁垚(2823)

水力采集过程中单球形颗粒起动试验研究···························陈宇翔，熊宏，程辉，陈洋(2831)

干湿循环下受弯钢筋混凝土梁的氯盐侵蚀····················蔡健，李名铠，陈庆军，赖骏，魏沐杨(2840)

粗骨料高质量分数充填料浆管输水力坡度模型及其应用···············杨晓炳，吴凡，杨志强，高谦(2851)

多层土地基扩底抗拔桩离散元颗粒流研究···························李飞，杨俊杰，宋琦，孙涛(2859)

隧道近距下穿管线的爆破振动特征及安全标准···························管晓明，张良，王利民，傅洪贤，余道明，陈刚，丁一，姜万里(2870)

不同变质程度煤在氧化过程中的表面官能团红外光谱定量分析··········································谭波，徐斌，胡明明，杨现兵，陈坤亮，徐丞(2886)

SAGD循环预热注汽参数影响规律数值模拟·····李朋，张艳玉，孙晓飞，刘洋，谢孟珂，王朝，陈会娟(2896)

基于改进粒子群算法的机车二系弹簧载荷分配优化·················韩锟，杨广为，黄泽帆，鲍天哲(2906)

考虑翻箱作业的铁路集装箱中心站起重机调度··························郭鹏，何迅，许素瑕(2915)

第12期

响应曲面法优化石英脉型金矿尼尔森重选工艺…………………陈桥，陈贵民，佟琳琳，林意人，杨洪英(2925)

合成条件对电解锰渣制备沸石过程中沸石种类和性能的影响………………………………………………………………李昌新，喻源，张庆武，汪洋，钟宏，王帅(2932)

粉末活性炭对偶氮染料的吸附特性及作用机制…………………………………………张婷婷，杨艳玲，李星，姜伊凡，王男，冀思扬，周志伟(2938)

微量Mn对Al-Zn-Mg-Zr合金板材组织与断裂韧性的影响……………………………………………陈景超，柴文茹，汪庆，杨臻珅，刘胜胆，叶凌英，唐建国(2948)

Co质量分数对FeCuCo预合金粉烧结与力学性能的影响………………………………刘志环，张绍和(2958)

料筒温度对超声塑化微制件充填质量的影响…………蒋炳炎，张英平，齐鹏程，邹洋，魏国猛，吴旺青(2969)

基础振动下电磁换向阀设计方法…………………………………………罗永康，张怀亮，刘瑞春，李卫(2978)

轮式磁吸附超声检测爬壁机器人的设计与吸附稳定性分析……………………李杰超，曹力科，肖晓晖(2989)

基于媒介齿条的渐开线圆柱蜗杆斜齿轮传动啮合特性分析…………………陈燕，殷国富，衡良，王玲(2998)

防滑控制参数对高速车辆车轮磨耗的影响……………………………江英杰，张合吉，陶功权，温泽峰(3007)

倾斜岩面桩桩端竖向承载力计算方法……………………………孙义舟，童建富，齐添，孙宏磊，蔡袁强(3015)

基于传递熵和改进替代数据法的损伤识别……………………叶昌鹏，刘国华，何先龙，谢中凯，王振宇(3023)

单轴压缩条件下平行双裂隙演化机理的颗粒流分析……………李勇，蔡卫兵，朱维申，董振兴，张强勇(3035)

分级循环荷载下泥岩和砂岩的阻尼特性试验研究…………………………王轲，潘旦光，鲁文艳，陈钒(3046)

基于反应谱分析的高层结构伸臂桁架最优位置研究………………………………………周颖，邢丽丽(3055)

持载下预应力CTRC板加固RC梁的抗弯性能……………………………………杜运兴，邵喜诚，周芬(3066)

土壤含盐量对电势作用下黄土水分迁移影响试验研究……………焦丹，任芮花，王铁行，宋彦琳，张磊(3075)

基于砂岩冻融敏感性的遗迹劣化预测………………………………………廖茹雪，谌文武，王南，刘伟(3084)

Q460高强钢材及T形对接接头力学性能研究…………………………………邢佶慧，陈前，王涛，杨娜(3097)

岩芯直径变形分析法及其在松科2井深部地应力调查中的应用………………………………………………………………杨跃辉，孙东生，郑秀华，林为人，李阿伟(3106)

采空区群蠕变突变三维力学模型构建及稳定性精确预测……………任红岗，汪旭光，谭卓英，夏志远(3114)

装配式核心钢管混凝土柱轴压性能及受力机理……………………刘阳，王超，郭子雄，王品治，许一鹏(3127)

基于最优扭矩控制策略的混合动力燃气热泵经济性分析……………………………陈涛，蔡亮，杨亚南(3137)

基于改进粒子群算法的海上风电汇集方式与并网优化研究……………牛东晓，赵东来，杨尚东，雷霄(3146)

假缝设置间距对道床板裂缝性能的影响…………………………………韦有信，杨斌，赵振航，赵延喜(3156)

纵向通风对地铁区间隧道火灾温度特性影响…………………………易欣，范晶，马砺，杨元博，张鹏宇(3163)

2019年第50卷卷终

Journal of Central South University(Science and Technology)General Contents(2019)

No.1

Numerical studies of performance of various liquid-solid momentum exchange coefficient models for fluidization behavior of particles··········································SUN Mingyang,YU Chuanbing,LÜ Dong,WEI Lubin(1)

Experimental study on purification of low grade magnesite by triboelectrostatic beneficiation······································ZHAO Xiaolu,WANG Haifeng,LI Yao,YANG Jinshang,PENG Zhen(9)

Research of phase transformation of potassium in roasting process of vanadium extraction from shale··························································YANG Xinlong,FENG Yali,LI Haoran(15)

Characteristics of Hg0oxidation by K2S2O8based on limestone-gypsum desulfurization slurry·················································TIAN Lijiang,LIU Bingkun,LI Jie,SHEN Xiaoling(23)

Research on powder-solid interface and coupling deformation of Ti6Al4V alloy powder during high temperature and high pressure····························JI Chenhao,LANG Lihui,HUANG Xina,MENG Fandi,XU Wencai(29)

Preparation and characterization of silver/rare earth elements/carbon microspheres antibacterial agents···············BAO Ruiyu,YU Yanmin,ZHANG Qinqin,WANG Xingxin,CHEN Huiying,XIA Jianxin,LI Hua(38)

Positioning algorithm of drill rod for full computer-controlled rock-drilling jumbo based on pose error compensation·····································XIA Yimin,LI Zhengguang,LUO Jianli,ZENG Guiying,MA Jiesong(44)

Coupled synchronization capability of motor internal leakage of hydraulic vibratory hammer system without synchronous gear············································LUO Chunlei,TANG Zhiqing,MO Xin,CHEN Zhenying(52)

Ambulance stretcher based on parallel mechanism and vibration semi-active control··············································GAO Xiang,NIU Junchuan,SHEN Guodong,TIAN Lili(59)

Design and analysis of high performance machine tool based on redundant parallel mechanism····················································ZHAO Fuqun,GUO Sheng,XU Zichun,LI Dian(67)

Reserve prediction of bank outlets based on prophet framework·············LI Liping,DUAN Guihua,WANG Jianxin(75)

Research on mixed lubrication characteristics of strip mill based on surface roughness features of rolling interface····································WANG Qiaoyi,ZHU Yuan,GUO Shan,ZHANG Qiubo,CHI Bingbing(83)

H∞sampled-data control of networked traction control system and its application··········································CHEN Gang,WANG Xin,LUO Changsheng,XIAO Shenping(91)

Experimental study of post-tensioned prestressed simply-supported beam after anchorage failure······················································ZHOU Lingyu,XUE Xianxin,YIN Guowei(100)

Trapdoor model tests on loosening earth pressure and failure mode of loosening zone in sand·································CHEN Qizhi,GUO Shenggen,XU Changjie,LIANG Luju,LIU Xingwang(108)

Development of combined retaining structure composed of anti-slide pile and reinforced earth retaining wall····················································CAO Wenzhao,ZHENG Junjie,XUE Pengpeng(118)

Dynamic mechanical property analysis of roller-compacted concrete and damage constitutive model establishment············································ZHANG Sherong,SONG Ran,WANG Chao,WEI Peiyong(130)

Static mechanical properties of argillaceous slate coarse-grained soil improved by cement···························································LIU Yu,CHEN Junhua,ZHU Ziqiang(139)

Antiknock design of H-section steel column subjected to synergistic effects of blast and prefabricated fragments····································································TIAN Li,ZHANG Hao(146)

Upper bound solution for ultimate bearing capacity of suction caisson foundation based on Prandtl failure mode········································ZHU Wenbo,DAI Guoliang,GONG Weiming,ZHAO Xueliang(158)

Mechanics model of rake torque based on sludge height and its mechanism analysis························YANG Ying,WU Aixiang,WANG Hongjiang,ZHONG Changyun,CHENG haiyong(165)

Analysis of law of movement of coarse aggregate particles in pipeline transportation of paste··································YAN Bingheng,LI Cuiping,WU Aixiang,WANG Hongjiang,HOU Hezi(172)

Ultimate load capacity of FRP-strengthened RC beams considering different failure modes and secondary loading effects·······························································FANG Shengen,WU Bangbang(180)

Reliability of bonding between recycled concrete and steel rebar········································YANG Haifeng,CHEN Wei,ZHANG Tianbao,JIANG Jiasheng(189)

Influence of foundation excavation pit on adjacent metro tunnel using fluid-solid mechanics theory·····················HUANG Kan,YANG Weijun,MA Qi’ang,AN Yonglin,LI Yi,ZHOU Jingwei,QIU Lang(198)

Effect of acid rain infiltration on shear strength of expansive soil and its microscopic test········································CHANG Jin,YANG Heping,XIAO Jie,MAO Rui,TONG Chao(206)

Comparison of combustible limits of H2/air flames in square and circular micro tubes·········FAN Aiwu,YUAN Zili(214)

Study on optimal adjustment method of second pipe network in central heating system based on dynamic hydraulic balance·······································ZHOU Xuan,LIU Guoqiang,WANG Xiaopei,YAN Junwei(220)

Experimental study on dynamic performance of composite sleeper ballasted track····················ZHAO Zhenhang,SHEN Yuting,WEI Qiang,JIANG Wanhong,GENG Hao,LI Chenghui(234)

Cascaded method for running state estimation of four-wheel independent drive electric vehicles·····································CHEN Te,CHEN Long,CAI Yingfeng,XU Xing,JIANG Haobing(241)

No.2

Study on collisions of steel balls in grinding mill at different rotation speeds·········LI Tengfei,LIN Shuyong,ZHANG Bo,ZHANG Jiaming,JIAO Fen,QIN Wenqing,ZHANG Yansheng(251)

Characterization analysis of goethite residue from zinc hydrometallurgy plants····LI Yuhu,GAO Lupeng,LIU Zhihong(257)

Degradation of azo dye and electricity production by dual-anode microbial fuel cell system···································WANG Lian,CAO Xian,FENG Yuzhong,ZHANG Yi,LI Xianning(264)

Investigation on hydroforming technology and process of fiber reinforced metal laminate parts································LIU Shichen,LANG Lihui,GUAN Shiwei,SHENG Sijia,ZENG Yipan(272)

Effects of precursors and elicitors on production of ethyl vincamine by endophytic fungus CH1······································REN Na,LIU Jiajia,YANG Dongliang,XU Shijie,LUAN Mingbao,ZHAO Nana,PENG Yinzi,WU Yiqiang,YUAN Guangming(279)

Effect of tooth surface zoning modification by duplex helical method on reducing sensitivity of installation error·······················································YAN Hongzhi,WU Shunxing,XIAO Meng(286)

Chaos prediction and abnormality diagnosis of running state of AC electrical dynamometer············································ZHONG Dingqing,WANG Ailun,HE Qian,WEI Kexiang(295)

Pressure loss of conveying pipeline of natural gas hydrate·············XU Hailiang,HU Wengang,YANG Fangqiong(304)

Numerical simulation of dynamic characteristics and parameter optimization of flip-flow screen surface···················WU Jida,LIU Chusheng,WANG Zhenqian,JIANG Haishen,ZOU Mengqi,QIU Wenqiang(311)

Simulation analysis of free falling posture of gravity sampling device using OpenFOAM···············································MA Zhe,KONG Danya,WANG Yin,ZHAI Gangjun(321)

Fretting wear characteristics of TC4 alloy in distilled water··········SONG Wei,SUN Lu,JING Pengfei,YU Shurong(328)

A single moving observer ambiguity resolution locating algorithm using single baseline interferometer················································GUO Limin,XIE Qiang,CHEN Tao,WANG Mengxin(336)

Application of improved intelligent algorithm based on particle swarm in load identification···············································XIE Bing,XIE Boqun,ZHANG Meng,QU Xianqiang(343)

Dynamic mechanical characteristics and failure modes of sandstone with artificial surface cracks·············································WU Hao,ZHAO Guoyan,LIANG Weizhang,WANG Enjie(350)

Experimental study on antenna spacing of ground penetrating radar detection of grouting material behind shield segment···························HU Shengbin,XU Guoyuan,MA Fuan,TANG Fu,RONG Jipan,ZHONG Youxin(360)

Chaotic characteristics of self-heating of sulfide ore heap·························WU Zhiwei,PAN Wei,WU Chao,LI Zijun,LI Ming,LIU Zhengzhou,FENG Yanxi(368)

Multi-objective optimization and multi-attribute decision making on structural parameters of stage backfilling stope····························································LAN Ming,LIU Zhixiang,LI Xibing(375)

Model test and theoretical analysis of anti clogging capacity of siphon drainage···············································WANG Lei,SHANG Yuequan,LÜ Junjun,XU Haodi(384)

Numerical analysis of influence of pile foundation construction on adjacent metro tunnel·····DING Zhi,ZHANG Xiao(390)

Construction monitoring and dynamic design of siltstone cutting high slope·················································WANG Yimin,WANG Zhaoyang,LI Qi,TAO Ziyu(400)

Parameter study on dynamic response of concrete filled square tube under lateral impact················································CAI Jian,YU Yu,CHEN Qingjun,LI Yunan,YE Jiabin(409)

Dynamic damage model of rock under impact loads of compression and tension·······················································XIE Fujun,ZHANG Jiasheng,CHEN Junhua(420)

An analytic model for axial load capacity and deformation capacity of short columns of circular UHPC filled steel tube··········································WANG Zhen,WANG Jingquan,LIU Tongxu,XIU Hongliang(428)

Numerical model building for broken ore body and optimization of stope structural parameters··································LIU Dong,SHAO Anlin,JIN Changyu,DING Chenggong,FAN Fuquan(437)

Analysis of factors affecting dynamic modulus of elasticity of saturated silty clay and research on backbone curve model····························································ZHUANG Yan,ZHU Wei,ZHANG Fei(445)

Variation law of rainfall infiltration depth and saturation zone of soil slope···································LIU Jie,ZENG Ling,FU Hongyuan,SHI Zhenning,ZHANG Yongjie(452)

Stress and stiffness characteristics of asphalt mixture under uniaxial tensile stress state·····························HUANG Tuo,QI Shuai,JIANG Haohao,HUANG Mouying,LI Mi,LI Yipeng(460)

Performance analysis of organic Rankine cycle power generation system with sinter cooling gas waste heat··············································FENG Junsheng,PEI Gang,DONG Hui,ZHANG Sheng(466)

Evolution of wake characteristics behind circular cylinder with an elastic splitter plate at low Reynolds number····························································HUANGFU Yucheng,SUN Zhiqiang(474)

Spray characteristics of non-normal fuel in-cylinder under condition of super-high pressure injection·······························LIU Qi,LIU Yunsheng,CHEN Xinzhuan,HUO Baiqi,OUYANG Guangyao(480)

Failure behavior and collision characteristics of energy-absorbing structures considering material failure criteria························FENG Yue,XIAO Shoune,ZHU Tao,YANG Bing,YANG Guangwu,CHE Quanwei(487)

No.3

Mineralogical characteristics of direct reduction titanium slag at Panzhihua·············································· WANG Yijie,XUE Yazhou,PAN Mao,WEN Shuming(497)

Reduction enhancement mechanisms of low iron grade ore-coal composite pellets by sodium salt·······································ZHONG Ronghai,HUANG Zhucheng,YI Lingyun,HAN Hetong(506)

Effect of Al2O3on metallurgical properties of blast furnace slags of vanadium-titanium magnetite and viscosity prediction model····························LIANG Haili,FENG Cong,CHU Mansheng,TANG Jue,WANG Wanping(514)

In-situ synthesis of Li4Ti5O12/S composite cathode by hydrolysis-melting diffusion method for all solid state lithium battery···································································DU Ying,LI Jie,LIU Jin(521)

Influence of plane grinding temperature threshold on formation of residual stress·························································WEN Jun,TANG Jinyuan,ZHENG Jinchao(530)

Disc cutter cutting mechanism under different combined dynamic and static loading conditions·······················································ZHANG Guiju,TAN Qing,LAO Tongbing(540)

Analysis of high-speed EMU gearbox sealing system based on multiphase flow theory·························································ZHANG Yu,ZHANG Kailin,YAO Yuan(550)

Dynamic characteristic of hydraulic leveling mechanism with a hybrid kinematic chain······················································KANG Huimei,ZHU Jianxin,WANG Shilin(557)

Attitude control of tandem rotor UAV based on cascade linear active disturbance rejection control·························ZHANG Yong,CHEN Zengqiang,ZHANG Xinghui,SUN Qinglin,SUN Mingwei(564)

A fault tolerant control method for quadrotor based on inner and outer loops················ZHENG Jiajing,LI Ping(572)

Target-centralization algorithm used for image preprocessing of CNN·················································DONG Qiucheng,WU Aiguo,DONG Na,FENG Wei(579)

Cloud model construction of virtual data agent and data placement···················HU Zhigang,ZHANG Xinxin,ZHENG Meiguang,CHANG Chenglong,LI Jia,YANG Liu(587)“Sweet spots zone” optimization of marine shale gas in complex geological conditions area out of Sichuan basin:a case of Paleozoic in Northwestern Hunan,China·········QIN Mingyang,GUO Jianhua,HUANG Yanran,JIAO Peng,LIU Chensheng,ZHENG Zhenhua,ZHANG Liangping,GUO Jun,CAO Zheng(596)

Evaluation and exploration suggestion of source rocks from Middle Jurassic to Lower Cretaceous in eastern Papuan Basin························LIU Xiang,GUO Jianhua,LIU Chensheng,KUANG Lixiong,LI Jie,ZHANG Zhen(607)

Displacement prediction model of landslide based on time series and GWO-ELM········································LIAO Kang,WU Yiping,LI Linwei,MIAO Fasheng,XUE Yang(619)

Influence of friction effect of sliding bearing on track-bridge interaction between continuous welded rail and long-span bridge in high-speed railway···································LIU Wenshuo,DAI Gonglian,QIN Hongxi(627)

New method of excavation base seepage stability calculation due to dynamic varying groundwater level·············································ZHANG Lisha,YING Hongwei,WANG Di,XIE Kanghe(634)

Experimental study on failure properties of frozen clay under dynamic loading·································LI Xiaolin,WANG Hongjian,ZOU Shaojun,JIANG Cong,NIU Yonghong(641)

Failure mode of deep underground cavity and upper bound solution of surrounding rock pressure·····················································ZHANG Daobing,MA Zongyu,LIU Zhizhen(649)

A prediction model on thermal boundary condition of embankment based on boundary layer theory············································LUO Xiaoxiao,YU Qihao,MA Qinguo,ZHANG Jianming(658)

Theoretical study of break down pressures and fracture initiation angles based on model containing wellbore and perforations···························FAN Yong,ZHAO Yanlin,ZHU Zheming,ZHOU Changlin,ZHANG Xianshang(669)

Experimental research on static mechanical properties of cement-improved argillite-slate coarse-grained soil under drying-wetting cycles···········································LIU Yu,ZHU Ziqiang,CHEN Junhua(679)

Damage model based on fracture cracking criteria······················MA Qiufeng,TIAN Jing,ZHOU Tianbai(687)

Study and application of grouting governing of completely weathered granite in water-rich stratum····QI Yanhai,LI Shucai,LI Zhaofeng,ZHANG Qingsong,YANG Lei,ZHANG Jian,LIN Rongfeng,WANG Kai(694)

3D nonlinear creep analysis method for concrete structures··············LI Shiwei,YANG Yongqing,CHEN Yuanjiu(704)

Experimental study on relationship among matric suction and moisture content and gradation of unsaturated coarse grained soil························HE Zhongming,LIU Yaxin,ZENG Xinfa,LIU Dengsheng,ZHI Menglin(712)

Measurement of pressure fluctuation characteristics during hydraulic lifting of spherical particles in vertical pipe····································································GUAN Hairong,SUN Zhiqiang(719)

Performance analysis for quantum thermoacoustic refrigeration micro-cycle working in generalized 1D potential········································································E Qing,WU Feng(726)

Comparative experiment study on combustion and emissions characteristics of gasoline blended with alcohols··········································LI Yu,GONG Jinke,YUAN Wenhua,FU Jun,LI Guangming(734)

Viscoelastic performance of CA mortar in prefabricated slab track·······························REN Juanjuan,LI Haolan,DU Wei,DENG Shijie,TIAN Genyuan,WU Jiang(743)

No.4

Dynamic analysis of SiC pellets drying based on apparent warp activation energy···········································LI Jian,FU Xiaoheng,LI Jun,ZHANG Yujing,SHI Yingjie(753)

Adsorption mechanism of octyl hydroxamic acid on bastnaesite surface··················WANG Jieliang,CAO Zhao,WANG Jianying,ZHANG Xuefeng,LEI Xiao,FENG Hongjie(762)

Visualization of liquid mixing process in top submerged blow stirred························ZHANG Han,ZAHNG Xiaohui,DENG Weipeng,ZHANG Guangjun,YAN Hongjie(771)

Analysis on photoreduction of Cr(Ⅵ)by visible-light-activated bismuth ferrite···········LI Wei,ZHANG Yongli,GUO Hongguang,LIU Yang,CHENG Xin,TANG Weihong,ZHAO Pingju(780)

Arsenic removal and regeneration of magnetic adsorbent prepared from backwashing iron sludge······································ZENG Huiping,YIN Can,SHENG Jiabao,LI Dong,ZHANG Jie(787)

Properties of Fe based pre-alloyed powder substitute Co application in diamond wire saw··································································LIU Zhihuan,ZHANG Shaohe(796)

Effect of annealing temperature on texture and anisotropy of mechanical properties of pure titanium(TA1)sheet······················ZHANG Guihua,JIANG Haitao,WU Bo,YANG Yonggang,TIAN Shiwei,GUO Wenqi(806)

Microstructural characteristics and mechanical properties of friction stir welded cupronickel alloy···························ZHOU Li,MIN Jie,LEI Shugui,HE Wenxiong,HUANG Yongxian,FENG Jicai(814)

Coupling reaction at Au-Sn heterogenous interface joints and its effects on mechanical property······························ZHU Xuewei,WEI Xiaofeng,HUANG Yuxiang,WEI Qizhe,CHENG Xiaoli(821)

Study on unsteady fluid radial force in deep-sea lifting pump·················ZHAO He,LIU Shaojun,HU Xiaozhou(829)

Law of system parameters and lifting performance in marine gas hydrate hydraulic lifting system·····················································XU Hailaing,HU Wengang,YANG Fangqiong(837)

Study on axial mechanical performances of wire rope strand considering inter-wire contact based on semi-analytical method···············ZHANG Manman,CHEN Yuanpei,MENG Fanming,GONG Xiansheng(845)

Experimental study on decoupling control for wheel-bridge simulated test bench of multiaxial vehicles····························································WANG Hui,ZHAO Guochao,JIN Xin(854)

Steering performance of tracked vehicle based on mechanical differential steering mechanism with twin driving····················································SHI Zhibiao,LIU Jiang,GAO Feng,ZENG Wen(864)

Quadrotor helicopter control based on LADRC &nonlinear mixed H2/H∞control structure·············································LIU Junjie,GAO Qiang,SUN Mingwei,CHEN Zengqiang(873)

Design of parameter self-turning fuzzy controller based on immune regulation mechanism·······························································LIU Bao,YE Huihui,CAI Mengdi(881)

Study on thermoplastic strain model of elastic knitted fabric in the heat setting process··············································ZHOU Lichun,LIU Shunjing,JIN Fujiang,CHU Beibei(892)

Optimal control of airborne electromagnetic wave form based on amplitude tracking method····································YU Shengbao,SONG Shuchao,XU Jianan,ZHANG Jialin,CHEN Xu(900)

Research on core induced polarization experimental system·····························JIA Jiang,KE Shizhen,ZHANG Bing,KANG Zhengming,LI Junjian,SUN Xu(908)

Characteristics of mesozoic and cenozoic volcanic rocks and its logging identification in Dawa Oil Field of Liaohe Basin·····················XIAO Mingguo,GUO Jianhua,JIAO Peng,GUO Xiangwei,WU Shiqing,TAN Hui(915)

Precast UHPC protection system for bridge pier against ship collision············ZHOU Lingyu,PU Xingxu,WEI Jun(923)

Research on settlement characteristics of embankment enclosed by reinforced soil and its control index·······················YANG Guolin,DUAN Junyi,HU Min,LUO Guangcai,QIU Mingming,LIN Yuliang(931)

Law of weakening mechanical properties of rare earth ore with leaching···········CHEN Xun,QI Yan,YIN Shenghua,LI Xiwen,XIE Fangfang,LIU Jiawei,CHEN Wei,YAN Rongfu(939)

Experimental study on advanced support effect in silty clay tunnel············LI Shucai,CHEN Hongbin,ZHANG Xiao,GONG Yingjie,LI Huiliang,DING Wantao,WANG Qi(946)

Three axis creep test and analysis of granite in underground laboratory of deep geological disposal···············································DING Yanzhi,ZHANG Qiangyong,ZHANG Longyun,REN Mingyang,YIN Xiangjie,WANG Bin,YU Guangyuan(957)

Effect of fissure on mechanical and damage evolution characteristics of sandstone containing hole defect··································ZHOU Junhua,YANG Kun,FANG Kai,ZHAO Tongbin,QIU Dongwei(968)

Deformation test of pre-disintegrating carbonaceous mudstone under loading and foundering condition······················CHEN Xiaowei,ZENG Ling,FU Hongyuan,LIU Jie,CHEN Shaozhuang,LIU Dashun(976)

Structure of continuously reinforced concrete pavement with double-layer reinforced and its application in urban road··················································LI Sheng,YANG Fan,LIU Meng,CHEN Shangwu(983)

Characteristics of flow around circular cylinder with slit at low Reynolds number······XING Pengfei,SUN Zhiqiang(990)

Optimizing model of topological structure for offshore wind farm absorption based on improved genetic algorithms··········································ZHAO Donglai,NIU Dongxiao,YANG Sangdong,LIANG Cai(998)

Analysis of application of reflective and thermal insulating coatings on double-line railway bridge CRTS II slab ballastless track····LIU Xueyi,YANG Jilong,JIANG Hengchang,KANG Weixin,YANG Rongshan,LI Zhenting(1005)

No.5

Influence of ultrafine comminution by high pressure grinding rolls on separation of vanadium titanium magnetite····································GUO Xiaofei,DAI Shujuan,ZHU Jujian,LI Lixia,WANG Hongbin(1013)

Analysis and calculation of steel scrap melting in multifunctional hot metal ladle·············································YANG Guang,DENG Shuai,XU Anjun,DAI Xiaoqing(1021)

Dust distribution rule and influencing factors in mobile grinding operation············································JIANG Zhongan,GAO Kangning,CHEN Jihe,LAN Gui(1028)

Transformation mechanism and leaching performance of rare earth fluoride molten salt slag in the process of Na2CO3-roasting····················································YANG Youming,LI Liu,XIAO Min,NIU Fei(1035)

Effect of homogenization on corrosion and fatigue performance of Al-4.46Mg alloy······················WANG Zailing,DENG Yunlai,WU Pengfei,SUN Lin,DAI Qingsong,YE Lingying(1042)

Effect of grain structure on stress corrosion resistance of Al-Zn-Mg alloy······························YE Lingying,YAO Xuebin,TANG Jianguo,LI Hongping,ZHANG Xinming(1049)

Effect of solution temperature on microstructure and properties of Ag-bearing 2205 duplex stainless steel·················································XIANG Hongliang,CHEN Shengtao,DENG Liping(1056)

Research progress of flexible and elastic bionic e-skin for robot······················QIU Lan,CAO Jianguo,ZHOU Jianhui,JIANG Jun,WANG Xiaolin,MIAO Cunxiao(1065)

Experimental research on in-mold hybrid molding of glass fiber reinforced polypropylene and nylon66············································FU Liang,JIANG Bingyan,WU Wangqing,MIN Liping(1075)

A new design method for compound modification of spur gear···················YANG Shuowen,TANG Jinyuan(1082)

Loss analysis and thermal control of power transformers with high power and high voltage················HUANG Yi,PENG Ke,WANG Wenchao,CHEN Lian,DONG Mi,SHAO Tian,LEI Jiahao(1089)

Fault current tracking method of motor simulator based on finite set model prediction·········································PENG Tao,LIU Bo,YANG Chao,QIN Rui,YANG Chunhua(1098)

Layered gel-casting process based on 3D printing technology·············LIU Enchen,GE Dongyuan,LUO Xinwu(1105)

Identically distributed multi-decision tree based on reinforcement learning and its application in imbalanced data sets··········································JIAO Jiangli,ZHANG Xueying,LI Fenglian,NIU Zhuang(1112)

Water inrush mechanism for slip instability of filled karst conduit in tunnels········································HUANG Zhen,LI Shijie,ZHAO Kui,WU Rui,ZHONG Wen(1119)

Experimental study of infrared radiation effects of rock with different loading rates···························································ZHOU Zilong,CHANG Yin,CAI Xin(1127)

Research on reverse rotation angle calculation method of vector form intrinsic finite element in plane···························WANG Shuangyan,LI Cong,YANG Yulong,PANG Zhicheng,TANG Hanqing(1135)

Mesoscopic numerical simulation for suffusion process of gap-graded sandy soil······································CAI Yuanqiang,ZHANG Zhixiang,CAO Zhigang,YAN Shuhao(1144)

Analysis of damage effects of a prestressed reinforced concrete hollow beam subjected to the synergistic effects of blast and fragments·····························································TIAN Li,LI Yongxin(1154)

Research on dynamic buckling propagation of pipeline with corrosion and ovality······················LI Muzhi,YU Jianxing,YU Yang,DUAN Jinghui,HAN Mengxue,LI Yang,YU Jiahui(1165)

Shear evolution and connected mechanism of pore structure in thickening bed of paste······························JIAO Huazhe,WANG Shufei,WU Aixiang,WANG Yiming,YANG Yixuan(1173)

Stability analysis and structural parameter optimization of pillar under impact of rockfall······································YU Qingjun,LI Yuanhui,LIU Zhaopeng,JI Xiaofei,PENG Kang(1181)

Experimental research on propagation mode of 3D hollow crack and material failure strength under hydro-mechanical coupling···································LI Bangxiang,ZHU Weishen,YANG Lei,YU Song,MEI Jie,

CAI Weibing,ZHANG Qiangyong,CHEN Yunjuan(1192)

Experimental study on crack resistance of reactive powder concrete beam-column joints·······································JU Yanzhong,SHEN Hao,WANG Dehong,ZHENG Wenzhong(1203)

Viscoelastic-plastic creep model of high stress argillaceous siltstone·······························LIU Xinxi,LI Shengnan,XU Zepei,LI Yu,GAO Xuewen,WANG Weiwei(1210)

Influence of seepage force on tunnel face stability by new Austria tunneling method··············HUANG Kan,AN Yonglin,YUE Jian,ZENG Xianchen,LI Jiahao,ZHANG Yijie,WANG Dong(1221)

Experimental research on nonlinear creep model of crumb rubber asphalt sand·································LIU Haoxuan,ZENG Guowei,BAI Fan,WU Liang,ZHENG Huasheng(1229)

Numerical simulation of material flow and heat transfer characteristics of cement rotary kiln··············································LIU Bin,ZHOU Wuzhou,ZHAO Pengcheng,LI Rui(1235)

Coupling effect of solidity and moment of inertia on performance of vertical axis wind turbine··············WANG Hanxiang,MA Wenlong,YU Hongdong,ZHANG Jinling,YAO Mingjian,ZHANG Lijun(1244)

Density functional theory analysis of acetic acid adsorption on CaCO3(104)surface···································CHAI Rukuan,LIU Yuetian,YANG Li,XIN Jing,XU Wanli,MA Jing(1252)

Band gap properties and noise reduction performances of periodic noise barriers in rail transit····································YI Qiang,WANG Yuhang,GAO Xin,ZHAO Caiyou,WANG Ping(1263)

No.6

Process mineralogy and grinding optimization of cassiterite polymetallic sulphide ore······················ZHOU Wentao,HAN Yuexin,LI Yanjun,SUN Yongsheng,YANG Jinlin,MA Shaojian(1271)

Reaction processes and kinetic study on preparation of nitrided ferrovanadium by V2O5··································WANG Bin,LI Dong,DU Jinjing,ZHU Jun,LIU Manbo,WANG Huan(1278)

Numberical simulation for metallurgical transfer in 70 t single snorkel RH···DOU Weixue,LEI Hong,ZHU Miaoyong(1284)

Efficiency and influential factors of grading coagulation process·······································DU Peng,LI Xing,YANG Yanling,SU Zhaoyang,FANG Xiaobo(1291)

Optimization design of pre-forming die based on intelligence algorithm·············WANG Menghan,YANG Yongchao,GUO Tao,WANG Zhoutian,ZHOU Wenwu,XIAO Guiqian(1298)

Preparation and high temperature tribological properties of cobalt-BaSO4self-lubricating composites·············································WANG Wenjie,CUI Gongjun,YANG Zhenwei,SHI Ruibo(1306)

Effects of textures on anisotropy of mechanical behaviors of cold-rolled and annealed Cu sheets under compressive loading·············WANG Renke,CHEN Zhiyong,SHAO Jianbo,XIAO Zhu,LIU Chuming,TANG Jianguo(1314)

Research on extraction of indium from methanesulfonic acid solution with P204·······················HE Jing,LI Yanggang,LIU Tao,LIAO Fangwen,CHEN Yongming,YANG Shenghai(1320)

Composition and formation mechanism of adhesive in blast furnace cooling stave······························MA Hengbao,ZHANG Jianliang,JIAO Kexin,ZHOU Yunhua,DAN Jiayun(1326)

Dynamics characteristics of multi-stage combined type large angle luffing mechanism·································ZHU Zhenxin,ZHU Jianxin,TANG Bohao,GU Linkun,QIAN Huanyun(1334)

An elastoplastic contact model for rough surface contact with continuous,monotonous and smooth stiffness···························································XIAO Huifang,SUN Yunyun,XU Jinwu(1343)

Tooth surface reconstructing method of spiral bevel gear generated by duplex helical method based on renewal Kriging model·········································DENG Chen,YAN Hongzhi,CHEN Yizhong,YI Weibin(1351)

Mechanical characteristics model of hydropneumatic suspension···································YU Ziliang,YANG Jue,MA Yuan,YIN Yuming,SUBHASH Rakheja(1357)

Effect of rolling parameters on grain size of hollow shaftwith variable cross section and equal diameter in cross wedge rolling···········································YU Xuan,PENG Wenfei,YU Chunjie,SHU Xuedao(1364)

Fault diagnosis of electronic throttle pedal based on probabilistic neural network··················································JIANG Yuxiu,ZHAO Xiaohuan,DENG Yuanwang(1370)

Automatic evaluation method of search snippet presentation performance··············ZHANG Hui,MA Shaoping(1378)

Applicability evaluation on application of thermosyphon in embankment engineering of expressway in permafrost regions of Qinghai-Tibet Plateau······························KONG Sen,WEN Zhi,WU Qingbai,WANG Dayan(1384)

Degradation behavior and mechanism of slate under alternating conditions of freeze-thaw and wet-dry·················································WU Guopeng,CHEN Wenwu,CUI Kai,WANG Pei(1392)

Blasting-induced fracture zone in rock mass considering integrity of rock mass·······················································XIE Fujun,ZHANG Jiasheng,CHEN Junhua(1403)

Study on statistical thermal damage constitutive model of rock based on normal distribution···················ZHU Zhennan,JIANG Guosheng,TIAN Hong,WU Wenbing,LIANG Rongzhu,DOU Bin(1411)

Properties and failure mechanism of layered sandstone based on acoustic emission experiments······················LIU Yunsi,WANG Shiming,YAN Shijun,FU Helin,CHEN Chen,SHI Yue,YUE Jian(1419)

Settling velocity variation of mud layer and particle settling characteristics in thickening of tailings············································HOU Hezi,LI Cuiping,WANG Shaoyong,YAN Bingheng(1428)

Seismic damage behavior of corroded reinforced concretemoment-resisting frames······················································LIU Xiaojuan,JIANG Huanjun,GUO Zixiong(1437)

Model test study on failure mode of segment structure of shield tunnel with crack length··························LIU Chuankun,HE Chuan,WANG Shimin,MA Gaoyu,GUO Wenqi,LU Daiyue(1447)

Experimental study on shear strength deterioration rules of fault fracture zone subjected to blasting vibration························································WU Tingyao,ZHOU Chuanbo,JIANG Nan(1457)

Numerical simulation on bearing behavior of glass fiber reinforcement polymer anti-floating anchor system in weathered rock foundation·······················BAI Xiaoyu,ZHANG Mingyi,KUANG Zheng,YAN Nan,JIA Keke(1466)

Research advances in numerical simulation of microbial enhanced oil recovery·····················WANG Tianyuan,XIU Jianlong,CUI Qingfeng,HUANG Lixin,MA Yuandong,YU Li(1474)

Numerical analysis and experiment of icing condition of bundled conductors·····································HE Qing,LI Junhui,ZHANG Jian,DENG Mengyan,DU Dongmei(1485)

Application of trial difference calculation method for bivariate in water cycle system···································································MENG Zhiqiang,ZHANG Pei(1492)

Optimal energy-efficient trajectory planning for middle-speed maglev considering constraint of auxiliary stopping area····················CHAI Xiaofeng,LIU Jun,LAI Qingying,MENG Lingyun,DING Wenliang,XU Yazhi(1499)

No.7

Effect of additives on bioleaching of copper sulfide ores······································CHEN Wei,YIN Shenghua,QI Yan,CHEN Xun,WANG Leiming(1507)

Adsorption mechanism of starch and sodium oleate on magnetite using QCM-D··········XIE Dongdong,HOU Ying,HUANG Guichen,TAO Dongping,HAN Cheng,WANG Xiaoli,JIN Da(1514)

Electrochemical synthesis of nickel isooctanoate·························YANG Shenghai,LI Weilun,WU Yanzeng,WANG Changhong,CHEN Yongming(1521)

Metal distribution behavior in copper dross smelting for enrichment···········XIAO Hui,XIE Boyi,CHEN Lin,WANG Zhixiong,LIU Weifeng,ZHANG Duchao,YANG Tianzu(1527)

Oxidation kinetics and interfacial bonding properties of Ni-Co based superalloys··························SONG Zhengqi,LI Zhiqiang,ZHENG Xudong,SHEN Mingming,ZOU Jianpeng(1537)

Mechanism for solidification of arsenic with blast furnace slag-steel slag based cementitious materials··········································YAN Qihui,NI Wen,GAO Wei,LI Yunyun,ZHANG Yuying(1544)

Critical blank holder force of deep drawing process for magnesium alloy cylindrical parts································YANG Liu,GUAN Yingping,YAO Dan,DUAN Yongchuan,GAO Anna(1551)

Dynamic engagement characteristics of sprag clutch with fluctuation of input speed······················YAN Hongzhi,TIAN Hao,ZHU Chu,LI Zhi,QIN Juan,LIU Jianrui,WANG Zhibiao(1558)

Working performance of deep-sea ore transporting equipment··········XU Hailiang,RAO Xing,YANG Fangqiong(1567)

Kinetic characteristics of high voltage circuit breakers based on spring stress relaxation······························LI Xiaofeng,WU Shijing,LI Xiaoyong,ZHAO Deng,LI Qiaoquan,LI Xing(1575)

High precision integrated profile and flatness control fornew-generation high-tech wide strip cold rolling mills······························CAO Jianguo,JIANG Jun,QIU Lan,LI Yanlin,HE Anrui,ZHANG Yongjun(1584)

Load sharing characteristics and experimental research of cylindrical gear split-torque transmission system·····································JIN Guanghu,LONG Shanshan,GAO Peng,PAN Lei,ZHU Rupeng(1592)

Fast coarse registration method of optical and SAR images based on visual saliency feature································································HUA Li,XU Chuan,SUI Haigang(1602)

Analysis of power model of multi-core microprocessor architecture····················································CHEN Zhuo,LIU Chang,HOU Shen,GUO Yang(1611)

Image stitching preprocessing method based onpseudo high dynamic range·······························WU Lianghong,SUN Liang,ZHOU Bowen,ZHANG Hongqiang,LU Ming(1619)

Control factors on the hydrocarbon accumulation of the Es4s reservoirs in Yanxie 229 area,Dongying Sag··································XIE Qiangwang,WANG Yanzhong,CAO Yingchang,WANG Shuping,LI Yuzhi,WANG Xin,LI Qiao,XI Kelai,MI Lianshan,GUO Yingchun(1626)

Research status of graphene material in fields of asphalt composites·············ZHANG Xia,HUANG Gang,ZHOU Chao,YUAN Xiaoya,HE Junxi,FENG Manman,LIU Zhao(1637)

Theoretical calculations of transverse force on shield tunnel caused by eccentric load·······························WEI Gang,HONG Wenqiang,WEI Xinjiang,LIN Xinbei,WANG Lizhong(1645)

Period-simulation of CRTS Ⅲ slab track based onMonte Carlo simulation and BIM ·····························WANG Weidong,LEI Xiaoming,DU Xianggang,WANG Jijun,HE Xiaogang(1655)

Influence of encasement length on deformation and stability of embankments on composite foundation reinforced with geosynthetic-encased stone columns·············CHEN Jianfeng,LI Liangyong,XU Chao,FENG Shouzhong(1662)

Effects of aggregate densification on unclassified tailings thickening performance···································ZHOU Xu,WANG Hongjiang,WU Aixiang,CAO Yansen,NIU Peng(1670)

Seepage calculation model and numerical analysis of rock fracture considering effect of contact area and clastic rock············PAN Dongdong,LI Shucai,XU Zhenhao,DU Yuchao,SHI Xuesong,GAO Bing,WANG Wenyang(1677)

Failure laws of asymmetrical double-arch tunnels under effects of voids behind vault······························MIN Bo,ZHANG Chengping,ZHANG Xu,GONG Yanping,YUAN Tengfei(1686)

Determination of regularization parameter in semiparametric model based on U curve method··············································ZHOU Yan,JIN Fengxiang,Liang Qinghua,MA Depeng(1696)

Effects of freezing methods on size distribution of ice crystals during pre-freezing mannitol··························································· JIA Yingjiao,LIU Zhiqiang,LUO Chun(1704)

Characteristics of frost spreading during initial stage of condensed droplet freezing on superhydrophobic surface····································································LUO Qianni,LIANG Caihua(1712)

A new Brayton cycle used for energy recovery of IC engine exhaust gas···································· ZHOU Feng,FU Jianqin,LIU Jingping,TANG Qijun,ZHU Guohui(1719)

Effects of jet temperature on high temperature gas jet controlled compression ignition·····················ZHU Pei,TIAN Hua,MENG Xiangyu,CUI Jingchen,TIAN Jiangping,LONG Wuqiang(1729)

Cooperative scheduling optimization model and simulation application for virtual power plant and efficiency power plant considering uncertainty and energy storage system······································ NIU Dongxiao,ZHAO Donglai,YANG Shangdong,LIU Longzhu(1736)

Test of automobile air resistance coefficient based on energy conservation method······························································· PING Peili,DU Weitao,HU Yumei(1744)

Damping effect of fundamental frequency of steel spring floating slab track based on magneto-rheological dampers with improved bang-bang control··············WEI Kai,NIU Pengbo,ZHAO Zeming,LI Huailong,DU Xianggang(1750)

No.8

Screening of PFOA-resisting bacteria and their physiological response to stress·····························YI Langbo,CHAI Liyuan,PENG Qingzhong,TANG Chongjian,ZHOU Lulu(1759)

An integration of new technologies for preparation of lithium antimonite and lithium hexafluoroantimonate······························LIU Weifeng,TANG Zanlang,CHEN Lin,ZHANG Duchao,YANG Tianzu(1768)

Oxidation separation of low-grade molybdenum with rhenium-bearing by two-stage roasting···············································DENG Qiong,FAN Xiaohui,GAN Min,CHEN Xuling(1778)

A new determination method for assimilation characteristic of iron ore based on dynamic resistance measurement······················QIAN Lixin,CHUN Tiejun,LONG Hongming,LI Ning,WANG Yifan,YU Zhengwei(1787)

Study ofChlorella vulgarisgrowth coupled with purification of livestock and poultry aquaculture wastewater·················································ZHU Zhongqiang,HE Xue,XUE Mengting,YU Ran(1795)

Preparation and bacteriostatic properties of flexible silicone hydrophobic coatings··················SHEN Qihui,SHAN Yixuan,LIAN Pengliang,LIU Yan,YU Dongdong,ZHOU Jianguang(1802)

Modified J-C constitutive model of H13 steel based on reverse fitting algorithm··························································· ZHANG Jing,ZHANG Song,LI Binxun(1808)

Compaction behaviors of hard spherical granules in cylinder subject to cyclic torsional shear············································OUYANG Hongwu,LEI Gang,TANG Xin,MENG Liping(1816)

Influence of blade shape and installation angels on cutting performance for scrapers of slurry shield·····························XIA Yimin,SHEN Feng,CHEN Songtao,CHEN Peng,SUN Xutao,NING Bo(1824)

Autonomous obstacle avoidance strategy for mobile robots in indoor dynamic environment·············································YANG Minghui,WU Yao,ZHANG Yong,XIAO Xiaohui(1833)

Simulation analysis of flow field and temperature field of oil-immersion lubrication gearbox······································BAO Heyun,FAN Yong,ZHU Rupeng,LU Fengxia,JIN Guanghu(1840)

Influence of shape of slotted airfoil on aerodynamic performance of vertical axis wind turbine······································ZHANG Lijun,MADongchen,GU Jiawei,JIANG Yijia,MI Yuxia,ZHAO Xinhui,WANG Hanxiang,LIU Yanxin,LIU Jing(1848)

Outage probability analysis of energy harvesting cognitive cooperative relay networks with direct link·······································LUO Yi,SHI Ronghua,DONG Jian,TANG Kun,WANG Yuting(1857)

Fatigue damage evolution of Timoshenko beams based on natural frequency···············WEI Jun,DU Yongxiao(1866)

Experimental study on a damage model of rock with center hole under high frequency impact·····························································WU Wanrong,YAO Zhuang,LIU Zhi(1876)

Layered slope stability analysis considering anisotropy·········· LUO Linghui,ZHOU Jian,CAI Lu,WEN Xiaogui(1883)

Micro-fracture evolution rule of sandstone specimens with a single hole under uniaxial compression··········································ZHAO Guoyan,WANG Enjie,WU Hao,QIU Ju,DAI Yiwen(1891)

Experimental investigation on shear performance of RC beams due to longitudinal reinforcement corrosion············································HUANG Tianli,ZHAO Zhiyan,SONG Li,WANG Ningbo(1901)

Parameter inversion of seismic waves in anisotropic media and its application in bad geological prediction of tunnels····································HE Xianqi,PENG Lingxing,LU Guangyin,ZHU Ziqiang,GAO Feng(1912)

Failure behaviors of cracked tunnel under impact from different loading orientations························ZHOU Lei,ZHU Zheming,FAN Yong,LIU Ruifeng,DENG Shuai,DONG Yuqing(1921)

Influence of water content on loess air permeability and its microcosmic mechanism·······································LIU Jinyang,LI Xi’an,GUO Zeze,LI Chengsheng,MA Chiyang(1930)

Constitutive model of rock compaction stage based on contact theory···········································MA Qiufeng,QIN Yueping,ZHOU Tianbai,YANG Xiaobin(1941)

Theoretical stability calculation of surrounding rocks in divergence of deep tunnel····························RAO Junying,XIE Caijin,ZHAO Xia,LIU Dengkai,NIE Chongxin,LIU Ning(1949)

Seismic behavior and design method of an innovative replaceable-on-site steel bridge pier·············································LÜ Yingting,GUO Zixiong,LIU Yang,HUANG Qunxian(1960)

Evolution rule of acoustic characteristics of brittle rocks during whole stress-strain process······························ZHANG Guokai,LI Haibo,WANG Mingyang,DENG Shuxin,WANG Zhen(1971)

Stress-strain relationships of bioenzyme-treated expansive soil···········CHEN Yongqing,WEN Changping,FANG Xuanqiang,CHEN Zonghui,SUN Zheng,WANG Jiejun(1981)

Analysis on pullout behaviors of full-bonding glass fiber reinforced polymer anti-floating anchor·····························BAI Xiaoyu,ZHANG Mingyi,KUANG Zheng,WANG Yonghong,YAN Nan(1991)

System model identification of superheated steam temperature based on particle swarm optimization····················································WANG Huan,RAO Zhenghua,LIAO Shengming(2001)

Laser visualization on characteristics of GDI ultra-high pressure spray impingement··················XU Kai,WEI Lixia,PEI Yiqiang,WANG Chenxi,LI Xiang,LI Junqi,YE Ziwang,XU Bei(2009)

Experimental research on pyrolysis of Cd contaminated rape stalk··················CAI Pan,JIANG Shaojian,PENG Haoyi,ZHU Mingwei,WANG Kai,WANG Hao,LIU Xi(2018)

Relationship between freezing methods of solution and ice grain size distribution··················································JIAYingjiao,YU Yunxia,LIU Zhiqiang,LUO Chun(2026)

Influence of impeller with splitter blades on jet self-priming centrifugal pump·······························DONG Liang,PAN Qi,LIU Houlin,DAI Cui,XU Jianhong,XU Hailiang(2033)

Analysis of stress and deformation of slab ballastless track under effect of subgrade frost heaving—melting—settlement cycle ···················XIANG Jun,LIN Shicai,YU Cuiying,YUAN Cheng,CHEN Lin,YANG Haiming(2043)

No.9

Hydrothermal scorodite precipitation and conversion behavior of metastable iron phase from wastewater produced in copper smelting············ZHANG Jun,LI Cunxiong,WEI Chang,DENG Zhigan,LI Xingbin,ZHANG Peng(2053)

Effect of heating process on Nb-Ti microalloyed high strength steel··············································LIANG Wen,WU Run,HU Jun,DU Tao,YIN Yunyang(2063)

Digestion performance and microstructure evolution of desilicated concentrate from low-grade high sulfur bauxite·························WU Hongfei,XIA Feilong,LI Junqi,CHEN Chaoyi,XU Shutao,ZHANG Shiheng(2074)

Preparation and characterization of Al2O3dispersion-strengthened copper-tin alloyed powder by diffusion method·················································YAN Zhiqiao,CHEN Feng,LIU Yong,WANG Tao(2084)

Characterization of micro-channel replication inmicrofluidic chip and its application in injection molding················································MIN Liping,JIANG Bingyan,ZHU Laiyu,LI Xianglin(2091)

Virtual material based modelingfor contact stiffness characteristics of bolted joint interface··············································XIAO Huifang,SUN Yunyun,XU Jinwu,SHAO Yimin(2100)

Rotating stall characteristics of mixed flow pump under different flange clearances··································PING Yuanfeng,SHI Weidong,LI Wei,JI Leilei,LI Enda,MA Lingling(2109)

Dynamics analysis and simulation of a novel parallelperfusion robot······YANG Hui,FANG Hairong,FANG Yuefa(2118)

Workspace analysis and trajectory planning of drill arm of roboticized bolting truck········································HAO Xuedi,JING Xinping,ZHANG Zhongping,XIE Yonghou,ZHANG Jinglin,LIU Bing,LIANG Zenan,WU Miao(2128)

Experimental investigation on chip morphology and properties in thread hard whirlwind milling of bearing steel GCr15········································HE Yan,BAI Yunlong,LI Li,WANG Yulin,LI Yufeng,YI Lili(2138)

Fault diagnosis of S700K switch machine based on fuzzy cluster method··················LIU Xinfa,WEI Wenjun(2148)

Stability analysis for network system based on quantitative control············CHEN Gang,CHEN Yun,WANG Wei(2156)

Real-time object tracking combined RGB-D with MeanShift··WANG Guanglong,TIAN Jie,ZHU Wenjie,FANG Dan(2163)

Fine road network modeling based on ubiquitous location data·················DENG Min,SHE Tingting,HUANG Jincai,LIU Huimin,ZHANG Jianguo,ZHENG Xudong(2171)

Engenparameter analysis for frequency-domain inversion of marine CSEM data········HAN Bo,LI Gang,LIU Ying(2184)

Influence of pavement stiffness and subgrade heterogeneity on additional stresses of pavement and subgrade resulted from aircraft loads·································HUANG Bo,WANG Yu,ZHAO Yun,LING Daosheng(2195)

Effect of heat treatment on physical and mechanical properties of frozen sandstone························JIN Aibing,WU Changgui,ZHAO Yiqing,WANG Benxin,SUN Hao,ZHAO Anyu(2207)

Analytical method for influence analysis of foundation pit excavation on underlying metro tunnel·················LIU Jianwen,SHI Chenghua,LEI Mingfeng,PENG Limin,CAO Chengyong,LIN Yuexiang(2215)

Numerical simulation of bentonite swelling attenuation processes in long time scale·····························································LI Xiaoyue,JIANG Hao,XU Yongfu(2226)

Shear properties of interface between argillaceous slate sand and concrete························ZHOU Yi,PENG Zhenbin,YIN Quan,CHEN Leqiu,CHEN Juan,ZHANG Chuang(2233)

Compressive characteristics of vertical inner plate reinforced square hollow section tubular joints·································CHANG Hongfei,XU Wei,ZUO Wenkang,LIU Shuaipeng,XIA Junwu(2242)

Research on transverse seismic pounding effect and shear-keygaps of high-speed railway continuous beam bridges················································YANG Menggang,WANG Chuankun,QIAO Jiandong(2252)

Effect of mixed aggregate gradation on segregation offilling slurry··········································WEN Zhenjiang,GAO Qian,CHEN Dexin,WANG Yongding(2264)

Calculation of rotation and shearing dislocation deformation of underlying shield tunnels due to foundation pit excavation·····································································WEI Gang,ZHANG Xinhai(2273)

Uniaxial mechanical characteristics of anchored sandstone andits mechanism of controlling buckling rockburst····································WANG Bin,NING Yong,FENG Tao,WANG Weijun,GUO Zeyang(2285)

Collapse mechanism of tunnel portal sectionin broken flysch under influence of heavy rainfall···········································GAO Yang,SUN Haokai,LIU Dejun,XU fei,ZHANG Qian(2295)

Morphology of heavy metals in process of pyrolysis of rape stalk···························ZHU Mingwei,JIANG Shaojian,FU Guofu,CAI Pan,WANG Kai,WANG Hao(2304)

Research on parallel hot water system of ·····················JIANG Yizheng,ZENG Zhiyong,BI Lin,LIU Yicai(2310)

Analysis of abnormal turning repair for locomotive wheels with polygonal wear and improvement measures················REN Dexiang,TAO Gongquan,LIU Huan,LIANG Hongqin,CHEN Guosheng,WEN Zefeng(2317)

Performance analysis and experimental study of hydro-electric coupling vehicle controllable ISD suspension····························YANG Xiaofeng,ZHAO Wentao,LIU Yanling,SHEN Yujie,YAN Long(2327)

No.10

Study on S0bio-reduction mediated reduction of iron minerals························XIA Xu,ZHOU Yuhang,XIA Jinlan,NIE Zhenyuan,WANG Na,YANG Hongying(2335)

Hydration mechanism of blast furnace slag-reduction slag based solid waste cementing materials·······························NIWen,LI Ying,XU Chengwen,XU Dong,JIANG Yaoqi,GAO Guangjun(2342)

Preparation and particle size control of ultrafine sodium pyroantimonate··········································CAO Sheng,YANG Xiyun,LI Jishen,XU Hui,SHI Xichang(2352)

Experimental analysis of atomization mechanism and influencing factors of air atomizing nozzle·············································JIANG Zhongan,XU Feng,WANG Yapeng,CHEN Jushi(2360)

Hot deformation behavior of iron oxide of 700 MPa grade high strength steel at high temperature··········CAO Guangming,ZHOU Zhongxiang,GAO Xinyu,YU Cong,WANG Hao,LI Zhifeng,LIU Zhenyu(2368)

Effect of porous BCP scaffold and its bionic ECM coating on function of MG63 cells···············CHEN Daiyuan,CHEN Liangjian,ZHENG Jingpu,YI Manfei,SHAO Chunsheng,ZHANG Bo(2376)

Inspection of defects in large curvature butt-welded bends with viscoelastic anticorrosive coating based on phased array ultrasonic guided wave scanning ·······································LUO Gengsheng,TAN Jianping(2385)

Influence of lateral swing on transportation characteristics of deep sea mining pipeline························································XU Hailiang,RAO Xing,YANG Fangqiong(2395)

Analysis of dynamic characteristics of a variable speed helicopter transmission system·························BAO Heyun,LI Fengbo,LU Fengxia,JIN Guanghu,ZHU Rupeng,ZOU Xiaozhu(2403)

Influence of localized spalling defect in roller bearing on contact characteristics and vibrations·························LIU Jing,TANG Changke,SHI Zhifeng,WANG Linfeng,XU Zidan,SHAO Yimin(2417)

Mixed thermoelastohydrodynamic lubrication investigation of misaligned journal bearings······································WANG Jiaxu,NI Xiaokang,HAN Yanfeng,XIANG Guo,Xiao Ke(2425)

New self-cooperation mobile robot and force coordinated distribution method······················································ZHANG Chengyu,GUO Sheng,ZHAO Fuqun(2435)

Research on airborne electromagnetic emission waveform via SHEPWM subsection control···············································YU Shengbao,GAO Lihui,CHEN Nan,HUANG Yong(2446)

Influence and correction of coil attitude on dynamic and static responses for fixed-wing································ZHU Kaiguang,WANG Hao,PENG Cong,ZHANG Qiong,FAN Tianjiao(2455)

Hydraulic-mechanical-chemical coupling evaluation for progressive failure of hard brittle shale wellbore··············XIAO Zhiqiang,JIA Shanpo,QI Xianyin,DAI Yonghao,LÜ Fang,JIA Lufeng,WEN Caoxuan(2464)

Performance of stiffness degradation of structure system in ballastless track-bridge under cyclic load·····ZHANG Yan(2481)

Influence of over-under-tightening of bolts onmechanical properties of connections of steel truss girder bridge············································GAO Qiang,HUANG Tianli,CHEN Long,FENG Xiliang(2491)

Experimental study on shear properties of concrete pile-clay interface considering surface roughness of structure··········································WANG You,LI Yijin,TANWei,TANG Mingming,DU Wei(2502)

Model tests of influences from drying-wetting cycle ondynamic responses of subgrade filled withcement-improved argillaceous-slate soil···········································ZHU Ziqiang,LIU Yu,CHEN Junhua(2510)

Fine dynamic analysis method for viscoelastic structures in frequency domain····················································GAI Panpan,XU Zhaodong,LÜ Lingyi,DAI Jun(2520)

Key influencing factors on wettability of blasting dust in Meishan Iron Mine···················WANG Jiaying,JIN Longzhe,GUO Jingzhong,LIU Jianguo,WANG Tianyang,GONG Qi(2527)

Experimental study on effective diffusion distance ofcement slurry in porous media under permeation grouting················ZHANG Yu,GUO Hao,CHEN Tielin,WANG Rongxin,CHENG Shaozhen,LIAO Xiaodong(2536)

Reinforcement mechanism and optimization design of rigid-flexible piled composite foundation under ultrahigh fill load······················DOU Hongqiang,YU Yanghang,NIE Wenfeng,WANG Hao,CHEN Lei,ZHANG Rui(2552)

Calculation method of dowel bars setting betweenunit ballastless track plates··········································WEI Youxin,YANG Bin,JIANG Jingsha,ZHAO Zhenghang(2563)

Research advances in pitching mechanism of H-type vertical axis wind turbine······ZHANG Lijun,MA Dongchen,HU Kuoliang,MI Yuxia,ZHU Huaibao,GU Jiawei,LIU Jing,YAN Qiang(2572)

Thermodynamic analysis of low temperature organic Rankine cycle system applied for CNG cold energy recovery·················································LI Chenghao,ZENG Zhiyong,CHEN Xingyu,LI Jie(2586)

Energy saving potential of two-stage compressiondual-temperature air conditioning system·····································YU Lei,REN Chengqin,YANG Yang,WAN Yangda,WANG Zhao(2595)

Study on sectional area of high-speed subway tunnel withspeed of 140 km/h······················································RAN Tengfei,LIANG Xifeng,XIONG Xiaohui(2603)

Energy absorption characteristics of honeycomb-filled taper tube under axial loading····················································LI Benhuai,LU Zhaijun,ZHU Huifen,XU Ping(2613)

No.11

Arsenic removal technology based on mechanical activation of natural pyrrhotite·······ZHANG Xingfei,LIU Shenmiao,CAO Xuefeng,HAN Haisheng,SUN Wei,CHENG Pengfei,WANG Li(2623)

Establishment of numerical simulation model for solid oxide fuel cell····················································TANG Shui,ZHANG Maogui,JIA Ming,LIU Yu(2633)

Effects of zinc and copper ions on ferric arsenate precipitation in hydrothermal scorodite······ZHANG Peng,LI Cunxiong,WEI Chang,CHU Ming,ZHANG Jun,Deng Zhigan,LI Minting,LI Xingbin(2645)

Nitrogen removal performance of ANAMMOX coupled multi-bacteria system with different carbon sources···························································LÜ Zhen,QIAN Yulan,LI Yan,LI Liang(2656)

Influence of 5083P-O and 6008-T6 aluminum alloys strain rate effect on cushioning characteristics of thin-walled circular metal tube buffer·····CHEN Shujian,XIAO Shoune,ZHU Tao,MIAO Dexiang,YANG Bing,YANG Guangwu(2665)

Hot deformation behavior and processing maps of new ultra-high strength Ti-20Zr-6.5Al-4V alloy········································NIE Zhongkui,YANG Qiuyue,ZHANG Wenwei,ZHANG Xue,YANG Hongyan,ZHANG Xi,TAN Yuanbiao,LIU Wenchang(2676)

Experimental study on plane compression fatigue characteristics of aluminum honeycomb panel with defects·············································CHEN Dongfang,WANG Runtang,XUWei,CAI Liangcai(2687)

Research on heat-tensile flow stress and solid boss plate forging for 5052 aluminum alloy·····························LIN Qiquan,WANG Xiaowei,DONG Wenzheng,LI Yantao,WANG Zhigang(2695)

WADRC for anti-swing positioning of underactuated crane with one parameters tuning························································XIAO Yougang,LU Hao,YU Yi,HAN Kun(2703)

Load characteristics of transverse flange pick cutting seafloor massive sulfide under high confining pressure·····································································LI Yan,LU Peng,LI Yuqing(2712)

Experimental study on road durability using typical roads in China·················LONG Yan,JIANG Lingshan,XIONG Hailin,LIU Xueqiang,CHEN Zhiyong,YU Zhiming(2722)

Multi-objective optimization of lightweight and fatigue life for car door··············LONG Yan,JIANG Lingshan,LIU Xueqiang,XIONG Hailin,CHEN Zhiyong,ZHONG Huiqing(2732)

Wide and heavy plate crown control based on data mining····························CAO Jianguo,JIANG Jun,ZHAO Qiufang,HE Anrui,LI Cunfu,SUN Xudong(2743)

Development of parallel ankle rehabilitation robot and motion control strategy··················LI Jianfeng,ZHANG Zikang,ZHANG Leiyu,DONG Mingjie,ZUO Shiping,ZHANG Kai(2753)

Fault diagnosis of S700K switch machine based on EEMD multiscale sample entropy········WEI Wenjun,LIU Xinfa(2763)

Model on variable weight-target approaching for risk assessment of water and mud inrush in intrusive contact tunnels·····················LI Zhaoyang,WANG Yingchao,LIU Yang,JIAO Qinglei,WANG Mitian,ZHANG Ye(2773)

Upper bound limit method for stability analysis of fill slope considering difference between filling and foundation soil································DUAN Junyi,YANG Guolin,LIN Yuliang,QIU Mingming,SHEN Quan(2783)

Experimental study on lateral unloading mechanical properties of siltstone considering intermediate principal stress···························································MA Yupei,LI Jiangteng,LIU Shuangfei(2792)

Quantitative determination method of mesoscopic parameters of discrete elements based on spherical symmetric design······················································PENG Xia,RAO Qiuhua,LI Zhuo,ZHANG Jie(2801)

Study on mechanical properties and fracture of DT Ⅵ 2 fastener elastic bar ···································CHEN Xianmai,QU Zhengjia,CHEN Wentao,GUAN Jibo,LI Yuetao(2813)

Laboratory test on the effect of foundation pit dewatering··········································WANG Xuwei,YANG Tianliang,XU Yeshuang,YUAN Yao(2823)

Experimental study on the incipient motion of a single spherical particle in hydraulic collecting············································CHEN Yuxiang,XIONG Hong,CHENG Hui,CHEN Yang(2831)

Chloride ingression in reinforced concrete beams subjected to flexural loading under cyclic drying-wetting condition··········································CAI Jian,LI Mingkai,CHEN Qingjun,LAI Jun,WEI Muyang(2840)

Pipeline hydraulic gradient model and its application for coarse aggregate filling with high mass fraction of slurry··············································YANG Xiaobing,WU Fan,YANG Zhiqiang,GAO Qian(2851)

Study on discrete element particle flow of multi-layered ground-based expanded bottom uplift pile··························································LI Fei,YANG Junjie,SONG Qi,SUN Tao(2859)

Blasting vibration characteristics and safety standard of pipeline passed down by tunnel in short distance·······································GUAN Xiaoming,ZHANG Liang,WANG Limin,FU Hongxian,YU Daoming,CHEN Gang,DING Yi,JIANG Wanli(2870)

FTIR quantitative analysis of surface functional groups in the oxidation process of coal samples with different metamorphic levels··········TAN Bo,XU Bin,HU Mingming,YANG Xianbing,CHEN Kunliang,XU Cheng(2886)

Numerical simulation of influence law of steam injection parameters in SAGD preheating stage···············LI Peng,ZHANG Yanyu,SUN Xiaofei,LIU Yang,XIE Mengke,WANG Zhao,CHEN Huijuan(2896)

Optimization of locomotive secondary spring loads distribution based on improved particle swarm optimization algorithm···········································HAN Kun,YANG Guangwei,HUANG Zefan,BAO Tianzhe(2906)

Gantry crane scheduling with container rehandling operations in railway terminals·····GUO Peng,HE Xun,XU Suxia(2915)

No.12

Optimization of Knelson gravity separation of a quartz vein type gold ore using response surface methodology································CHEN Qiao,CHEN Guimin,TONG Linlin,LIN Yiren,YANG Hongying(2925)

Effects of synthesis conditions on formation process and property of zeolite prepared from electrolytic manganese residue······················LI Changxin,YU Yuan,ZHANG Qingwu,WANG Yang,ZHONG Hong,WANG Shuai(2932)

Adsorption characteristics and mechanism of azo dyes by powdered activated carbon·············ZHANG Tingting,YANG Yanling,LI Xing,JIANG Yifan,WANG Nan,JI Siyang,ZHOU Zhiwei(2938)

Effect of minor Mn addition on microstructure and fracture toughness of Al-Zn-Mg-Zr alloy sheet···CHEN Jingchao,CHAI Wenru,WANG Qing,YANG Zhenshen,LIU Shengdan,YE Lingying,TANG Jianguo(2948)

Effect of Co content on sintering and mechanical properties of FeCuCo pre-alloyed powders···································································LIU Zhihuan,ZHANG Shaohe(2958)

Effect of barrel temperature on filling quality of ultrasonic plasticized micro-parts··············JIANG Bingyan,ZHANG Yingping,QI Pengcheng,ZOU Yang,WEI Guomeng,WU Wangqing(2969)

Design method of electromagnetic directional valve under foundation vibration····························································· LUO Yongkang,LIU Ruichun,LIWei(2978)

Design and adsorption stability analysis of wall climbing robot based on wheeled magnetic adsorption for ultrasonic detection·····························································LI Jiechao,CAO Like,XIAO Xiaohui(2989)

Meshing performance analysis of involute cylinder worm and helical gear drive based on media rack··················································CHEN Yan,YIN Guofu,HENG Liang,WANG Ling(2998)

Effect of anti-skid control parameters on wheel wear of high speed vehicle··········································JIANG Yingjie,ZHANG Heji,TAO Gongquan,WEN Zefeng(3007)

Calculation method of tip vertical bearing capacity of rock-socketed pile on inclined rock surface····································SUN Yizhou,TONG Jianfu,QI Tian,SUN Honglei,CAI Yuanqiang(3015)

Damage identification based on transfer entropy and improved surrogate data method·······························YE Changpeng,LIU Guohua,HE Xianlong,XIE Zhongkai,WANG Zhenyu(3023)

Particle flow analysis of parallel double crack evolution under uniaxial compression···························· LI Yong,CAI Weibing,ZHU Weishen,DONG Zhenxing,ZHANG Qiangyong(3035)

Experimental study on damping characteristics of mudstone and sandstone under graded cyclic loading·················································WANG Ke,PAN Danguang,LU Wenyan,CHEN Fan(3046)

Optimal outrigger locations of high-rise buildings based on spectrum analysis···············ZHOU Ying,XING Lili(3055)

Flexural behavior of RC beams repaired with prestressed CTRC plates under sustaining loads··························································DU Yunxing,SHAO Xicheng,ZHOU Fen(3066)

Experimental research on effect of soil salinity in loess moisture migration under action of electric potential···································JIAO Dan,REN Ruihua,WANG Tiehang,SONG Yanlin,ZHANG Lei(3075)

Forecast of heritage deterioration based on freeze-thaw sensitivity of sandstone··················································LIAO Ruxue,CHENWenwu,WANG Nan,LIUWei(3084)

Performance of Q460 high strength steel and T-shape fully penetration butt weld joints···················································XING Jihui,CHEN Qian,WANG Tao,YANG Na(3097)

A method of diametrical core deformation analysis and its application on stress investigation in SK2Well·································YANG Yuehui,SUN Dongsheng,ZHENG Xiuhua,LINWeiren,LI Awei(3106)

Construction of three-dimensional mechanical model for creep and catastrophe of goaf group and accurate prediction of its stability····························REN Honggang,WANG Xuguang,TAN Zhuoying,XIA Zhiyuan(3114)

Axial compression performance and load bearing mechanism of prefabricated core steel tube reinforced concrete columns ·····························LIU Yang,WANG Chao,GUO Zixiong,WANG Pinzhi,XU Yipeng(3127)

Economic analysis of parallel hybrid gas heat pump based on optimal torque control strategy·····························································CHEN Tao,CAI Liang,YANG Yanan(3137)

Research on convergence mode and grid-connected optimization of offshore wind power based on improved particle swarm optimization algorithm ·················NIU Dongxiao,ZHAO Donglai,YANG Shangdong,LEI Xiao(3146)

Influence of false seam spacing on crack performance of bed slab············································WEI Youxin,YANG Bin,ZHAO Zhenhang,ZHAO Yanxi(3156)

Effect of longitudinal ventilation on temperature characteristics in metro tunnel under fire···········································YI Xin,FAN Jing,MALi,YANG Yuanbo,ZHANG Pengyu(3163)

The End of Vol.50(2019)