总 目 次

篇 名作者 卷（期）：页

Cu含量对喷射成形7055铝合金微观组织和力学性能的影响······················································································陆正萍 ,张桢 ,蒋云泽 39（1）： 1

Mg-7Gd-3Y-1Nd-2Zn-0.5Zr合金高温热变形行为研究·················································李 蒙 ,王 新 ,张永强 ,王 俭 ,徐 哲 ,张平辉 39（1）： 6

纳米Al2O3颗粒对Cu-Al2O3性能的影响········································································陈 渝 ,屠晓倩 ,王柳幸 ,付亚波 39（1）： 15

Al2O3/WO3/ZrO2催化剂的制备及在酯交换反应中的研究········································································何 垚 ,文振中 ,杨 丹 ,孟志强 39（1）： 19

ZnO/Bi2WO6异质结的制备及光催化制氢研究······························································································司梦银 ,崔立峰 39（1）： 25

316L不锈钢与CaSiO3复合材料选择性激光熔化制备工艺····························································马铮杰 ,任 灿 ,严 彪 ,王联凤 ,程灵钰 39（1）： 31

Al-Zn-Mg-Cu系铝合金微合金化的研究进展···················································································刘懿芳 ,田 伟 ,孙 玥 39（1）： 38

CO2催化重整生物质焦油金属催化剂的研究进展·················································蔡 晴 ,张瑞新 ,王燕刚 ,康诗飞 ,左元慧 ,崔立峰 39（1）： 42

锂离子电池硅/碳负极材料的制备与应用········································································刘旭燕 ,朱新杰 ,陆友才 ,潘 登 39（1）： 49

有机朗肯循环系统研究综述········································································黄雅婷 ,陶乐仁 ,黄理浩 ,乔家广 39（1）： 57

混合导电材料电导率的测试方法研究····························································魏丽郦 ,刘雪琪 ,童雨竹 ,袁梦辉 ,董文静 39（2）： 1

Mo对650 ℃高温钛合金组织和性能的影响······································郭佳林 ,董燕妮 ,岳 旭 ,陈秉刚 ,王鼎春 ,刘建荣 ,王清江 39（2）： 6

工艺参数对铝合金微齿轮热挤压成形的影响········································································陈泽中 ,程志龙 ,李雪源 ,赵 娜 39（2）： 12

Al,K和Si对钼粉还原及烧结过程的影响·················································卜春阳 ,李文虎 ,刘博洲 ,董洪峰 ,王 娜 ,庄 飞 39（2）： 18

POSS功能化镧系稀土配合物杂化材料的制备与表征······························································································胡 皓 ,李 颖 39（2）： 23

石墨相氮化碳表面包覆改善锂离子电池正极材料LiCoO2电化学性能的研究·················································毛立浩 ,薛亚楠 ,周云龙 ,左元慧 ,康诗飞 ,崔立峰 39（2）： 28

Y含量对Mg-Zn-Y非晶合金性能的影响····························································任 帅 ,何美凤 ,王 浩 ,潘 登 ,周锟广 39（2）： 35

热交换器翅片用亲水铝箔预处理工艺控制·········································································································李高林 39（2）： 42

碳膜材料的热学性能及研究进展········································································邱汉迅 ,闫廷龙 ,李幸娟 ,杨俊和 39（2）： 46

韩国POSCO公司的镁业务进展·········································································································罗 晔 39（2）： 56

架空电力线路用导体材料的研究现状和发展方向··········································································································黄崇祺 39（3）： 1

生物医用开孔泡沫锌的制备及力学性能·····························································祖国胤 ,李志刚 ,胡 磊 ,黄 鹏 ,穆永亮 39（3）：11

多主元FeNiMnCr0.75Alx高熵合金微观结构和力学性能的研究·······························································································张威威 ,李荣斌 39（3）：18

共价有机多孔稀土杂化材料的制备与性能····················································································梁亚东 ,李 颖 ,王 霞 39（3）：23

淬火方式对薄壁轴承套圈变形的影响········································································冯纪伟 ,王智勇 ,王秉楠 ,李 铮 39（3）：28

轧制工艺和退火温度对TC4ELI钛合金厚板显微组织的影响··················································王 俭 ,李有华 ,李 蒙 ,王勤波 ,王 新 ,张永强 39（3）：32

焊接工艺对镍基焊缝气孔的影响·······························································································赵晓兵 ,鲁艳红 39（3）：36

基于微波法快速合成短棒状SBA-15的探析········································································沈 蔚 ,洪周琴 ,罗 超 ,何丹农 39（3）：43

ENYA贴片机提升产能的设备改造·······························································································孙启伟 ,孟庆辉 39（3）：48

镁基非晶合金作为生物材料的应用现状····················································································谈正中 ,戚孝群 ,赵一鹤 39（3）：53

PDP用压延铜箔表面黑化处理研究进展·····························································张 宁 ,刘新宽 ,刘 平 ,江幼平 ,黎晓桃 39（3）：59

GH105合金元素含量对析出相的影响·····························································沈祎舜 ,姚志浩 ,陈筱菲 ,董建新 ,江 河 39（4）： 1

Cu/Ni3Ti原位复合材料的显微组织和力学性能··················································毛 虎 ,杨宏亮 ,张 正 ,姜 江 ,李永涛 ,史晓斌 39（4）：10

Al-6.6Zn-1.7Mg-0.26Cu合金挤压材焊接接头的组织与性能·····························································张 会 ,刘 磊 ,周 楠 ,罗明强 ,胡 权 39（4）：16

硼粉粒度对Li-B合金结构及热稳定性的影响·······························································································朱 琳 ,卢 丫 39（4）：21

碱土金属碳酸盐催化乙醇胺-CO2反应机理研究····················································································周云龙 ,崔立峰 ,史焕聪 39（4）：25

模板法制备La2O3-CexZr1-xO2催化酯交换反应的研究········································································孟志强 ,文振中 ,陈 凯 ,何 垚 39（4）：32

双氧水还原浸出非洲氧化铜钴矿的试验研究·····························································梁伟华 ,郑世林 ,吴理觉 ,文定强 ,付海阔 39（4）：38

铝合金导体应用发展历程及现状··········································································································吴振江 39（4）：42

航空航天紧固件用钛合金材料综述··················································李 蒙 ,凤伟中 ,关 蕾 ,王 新 ,张永强 ,王 俭 39（4）：49

镁基非晶合金的研究进展··················································付振闯 ,李 强 ,常春涛 ,刘 芳 ,王新敏 ,潘 登 39（4）：54

无铅易切削黄铜的发展现状及发展方向·······································张瀚巍 ,刘 平 ,刘新宽 ,马凤仓 ,李 伟 ,何代华 ,陈小红 39（4）：58

C含量对一种单晶高温合金组织和持久性能的影响·····················································································史振学，刘世忠，赵金乾 39（5）： 1

TaAgN复合膜显微结构、力学性能和摩擦性能的研究·····················································································黄 婷，喻利花，许俊华 39（5）： 7

Ni-W-Co三元合金镀层电镀工艺的研究···········································································王露露，刘新宽，王 琪，刘 平 39（5）：13

热处理对钎焊铝箔翅片料抗下垂性能的影响·····················································································靳丹萍，刘欢欢，赵 杰 39（5）：19

Ca和Sn对提升机控制手柄用Mg-Al-Zn-Si合金性能的影响······················································赵瑞峰，安 琴，张清正，张 永，石桂林，李 峰 39（5）：24

交叉轧制对TA1钛箔材组织和性能的影响································································李 蒙，关 蕾，凤伟中，王 新，张永强 39（5）：28

高抗力金属板带材多辊冷轧机特点分析································································································韩 晨，孙付涛 39（5）：33

高频焊铝合金冷凝器集流管线能量的研究································································································曹国富，曹丽珠 39（5）：39

超弹性β-Ti合金研究进展······················································马广昊，李 强，常春涛，何美凤，王新敏，潘 登 39（5）：46

低压铸造法制备铝基复合材料的研究现状···········································································郑小秋，谢世坤，易荣喜，郭秀艳 39（5）：51

光电催化还原CO2金属氧化物催化材料研究进展······················································张瑞新，蔡 晴，王燕刚，康诗飞，左元慧，崔立峰 39（5）：58

无镀镍铜铝低温钎焊工艺研究·······························································曹凯，刘平，刘新宽，王子延，张卓，曹蒙云 39（6）： 1

固体酸催化混合胺的CO2解吸性能分析·····················································································曹一凡，史焕聪，崔立峰 39（6）： 7

氮化硅光固化增材制造工艺与性能的研究··············································································严鹏飞，严彪，王联凤，程灵钰 39（6）：12

ProCAST在汽车轮毂制造中的应用···································································································钟强强，王晶 39（6）：16

铜排表面质量的影响因素及控制方法································································································黄路稠，高育红39（6）：23

新型生物医用钛合金的设计及应用进展·························································麻西群，于振涛，牛金龙，余森，刘少辉，贺新杰 39（6）：26

钨的钎焊研究进展·····················································································陈远亭，李先芬，陈柏炎 39（6）：32

微纳结构硅在锂离子电池中的研究现状··············································································刘旭燕，吴晓龙，杨敏，朱新杰 39（6）：37

氢氧化镁基阻燃剂的研究进展··········································································································谢超飞 39（6）：44

支架用NiTi合金的表面改性方法研究进展·······················································································张涵，张柯，刘平，田浩 39（6）：48