APP下载

Spin-orbit torque in perpendicularly magnetized[Pt/Ni]multilayers

2023-11-02YingCao曹颖ZhichengXie谢志成ZhiyuanZhao赵治源YuminYang杨雨民NaLei雷娜BingfengMiao缪冰锋andDahaiWei魏大海

Chinese Physics B 2023年10期
关键词:志成大海

Ying Cao(曹颖), Zhicheng Xie(谢志成), Zhiyuan Zhao(赵治源), Yumin Yang(杨雨民),Na Lei(雷娜), Bingfeng Miao(缪冰锋), and Dahai Wei(魏大海),‡

1State Key Laboratory for Superlattices and Microstructures,Institute of Semiconductors,Chinese Academy of Sciences,Beijing 100083,China

2College of Materials Science and Opto-Electronic Technology,University of Chinese Academy of Sciences,Beijing 100049,China

3Fert Beijing Institute,MIIT Key Laboratory of Spintronics,School of Integrated Circuit Science and Engineering,Beihang University,Beijing 100191,China

4National Laboratory of Solid State Microstructures and Department of Physics,Nanjing University,Nanjing 210093,China

Keywords: spin-orbit torque,perpendicular magnetic anisotropy,spintronics

1.Introduction

The rapid development of emerging information technologies, such as artificial intelligence, requires highperformance and energy-efficient memory devices.[1,2]The spintronic memories, where information is encoded by the magnetization,provide a promising solution for the next generation data storage and processing.[3]Magnetic films exhibiting perpendicular magnetic anisotropy (PMA) are of great significance in the fabrication of magnetic tunnel junctions (MTJs),[4]which are the core of the magnetic randomaccess memory (MRAM) with high storage density and high thermal stability at room temperature.[5,6]Meanwhile the spin-orbit torque (SOT) MRAM has advantages of high energy efficiency, sub-ns switching and high endurance for writing operation.[7,8]These advancements have been pivotal in driving forward research and development efforts,enabling integration with traditional complementary metaloxide-semiconductor (CMOS) processes.[9]Thus, the magnetic materials and structures with both strong PMA and high SOT efficiency are crucial for the development of the MRAM applications.

The perpendicular magnetized CoFeB/MgO bilayer is one of the most promising MTJ materials systems, which has been intensively investigated and widely utilized in various spintronics applications.[10]However,the interfacial PMA originated from the CoFeB/MgO interface is insufficient to maintain high thermal stability for MTJs at reduced dimension smaller than 20 nm.[11,12]To achieve stronger PMA for future sub-10 nm technology node, a number of material systems,such as Co(Tb,Gd),[13,14]L10-ordered FePt,[15]MnGa[16]alloys and CoPt[17]multilayers have been explored,which have significant magnetocrystalline anisotropy.The bulk PMA in such alloys is very sensitive to the crystal structures of the films,and requires epitaxial growth or strict heat treatment.[18]In contrast, the PMA in the multilayers mainly arises from the interfacial effect at the multiple interfaces which can be easily tuned and are much easier for fabrication in practical device applications.[19]The perpendicular magnetized Co/(Pt,Pd)[20]and Fe/Pt[21]have been realized and intensively studied.However,the PMA of Ni/Pt multilayer is relatively complex.There may be several mechanisms,like the magnetoelastic anisotropy induced by lattice stress[22]and magnetocrystalline anisotropy of the interfaces,[23]that can lead to PMA in Ni/Pt multilayers.Therefore, the dependence of PMA for Ni/Pt multilayer on the thickness of the Ni and Pt layer is intriguing.

Furthermore, the magnetization switching of ferromagnets through current-induced spin-orbit torque (SOT) has received significant attention in recent years.[24]In ferromagnetic metal (FM)/ heavy metal (NM) heterostructures, it is mainly the spin Hall effect(SHE)and the inverse spin galvanic effect that provide SOT.[25]When the FM layer exhibits perpendicular magnetic anisotropy,achieving deterministic magnetization switching under current-induced SOT often requires an in-plane bias field to break the symmetry.[26]However,there have been few reports on the SOT of Ni/Pt multilayer films before.This urgently requires us to further explore SOT in Ni/Pt multilayer, in particular, the SOT efficiency and bias field dependence,which could enrich the content of Ni/Pt multilayer films in the field of SOT.

Here we fabricated a multilayer structure composed of[Pt(2-t)/Ni(t)]4, where the thicknesstof the Ni layer in the periodic layer was adjusted to achieve PMA within a relatively narrow range of thicknesses (below the intrinsic spin diffusion length).The observed PMA phenomenon arises from the interplay between magnetoelastic anisotropy and interface anisotropy.Subsequently, we successfully achieved SOT induced switching of the PMA magnetic multilayer films using a current density of approximately 1×107A/cm2.The effectiveness of the spin switching process in the device was found to be influenced by the regulation of the thicknesst.

2.Experimental details

In this work, a serials of substrate/Ge(3)/[Pt(2-t)/Ni(t)]4/Ge(3)multilayers were grown on thermally oxidized Si substrates using a high vacuum magnetron sputtering system with a base pressure of 8×10-8Torr at room temperature,as shown by the inset in Fig.1(a).The[Pt(2-t)/Ni(t)]4multilayers were deposited by the alternative deposition of Pt and Ni using radio-frequency and direct current sputterings.The deposition rates for Pt and Ni are 0.019 nm/s and 0.018 nm/s,respectively,which were calibrated by atomic force microscopy(AFM).The thicknesstis varied from 1.45 nm to 1.85 nm.Both buffer and capping layer are 3 nm Ge layers.The AFM measurements also indicate smooth surfaces and the surface root mean square roughness is about 0.3 nm for our stacks.These multilayers were further fabricated into 10×40µm2Hall bar devices using photolithography and ion milling.The electric transport measurements were performed by a Quantum Design physical property measurement system(PPMS)at room temperature,figure 1(a)illustrates the testing geometry.The magnetic properties of all multilayers were characterized by a Quantum Design magnetic property measurement system(MPMS)with a superconducting quantum interference device(SQUID)at room temperature.

Figure 1(b) exhibits the anomalous Hall loops of the[Pt(2-t)/Ni(t)]4multilayers with differentt.The multilayers with thicker Ni layers, as shown by the blue (t=1.65),red (t=1.75), and black (t=1.85) curves, exhibit squareshaped loops, which suggest a strong PMA.Otherwise,these multilayers witht <1.65 exhibit in-plane magnetic anisotropy(IMA).The anomalous Hall effect(AHE)coefficients of these multilayers are all negative, which is consistent with the previous results for Ni.[27]The saturation magnetization(MS)of all multilayers was obtained from theM-Hhysteresis loops and plotted as black triangles in the top panel of Fig.1(c).TheMSmonotonically increases with Ni thicknesst.The magnetic moment per Ni atom was calculated and plotted as the red triangles.It increases from 0.129µB/atom att=1.45 nm to 0.216µB/atom att=1.85 nm,which is far below the bulk value of Ni (~0.6µB/atom).[23]Such a small atomic moment at room temperature can be attributed to the reduced Curie temperature (TC) as Ni film in ultrathin region.It increases with thicknesstand would finally reach the bulk value for thick Ni films.[23]Notably,the multilayer[Pt(2-t)/Ni(t)]Ncan show room temperature ferromagnetism only whenN >3,while for smallerNthe reducedTCis lower than room temperature due to the small total thickness of Ni layer.

To investigate the relation between PMA andtin[Pt(2-t)/Ni(t)]4multilayer films,both in-plane and out-of-plane hysteresis loops were measured to extract the values of the effective anisotropy field(HK).Then,the effective perpendicular magnetic anisotropy energy density(Keff)was further calculated from the in-plane and out-of-plane hysteresis loops.HK(black squares)andKeff(red circles)are plotted as a function oftin the middle panel of Fig.1(c).Consistent with the anomalous Hall loops shown in Fig.1(b),Keffis positive as a perpendicular magnetic anisotropy att ≥1.65 and presents a nonmonotonic trend with the maximumKeff=8.21 kJ/m3appearing att=1.75.

The resistivity increases as the thickness decreases due to the additional scattering at the interface and surface of the film.The resistivity(ρxx)of[Pt(2-t)/Ni(t)]4multilayer,composed aslinearly decreases from 90.8µΩ·cm att=1.45 to 61.36µΩ·cm att=1.85,as shown in Fig.1(c),which is due to the increase of Ni atoms witht.This means that astincreases, the proportion of Ni increases, and the resistance gradually approaches the resistivity of the Ni layer,resulting in a decrease in the total resistivity.The multilayer structure can also be viewed as incorporating Pt intercalation into the Ni layer,which introduces interlayer impurity scattering,and subsequently enhances the resistivity of the material.Although the anomalous Hall resistivity(ρAH)should be proportional toρxy,ρAHis factually inversely proportional toρxywith increasingt, which is mainly due to the huge enhancement ofMSrelated with increasingt.

Fig.1.(a)The structure of the[Pt(2-t)/Ni(t)]4 multilayers and the Hall bar device used for the electrical transport measurements.(b)RAH vs. Hz curves of the[Pt(2-t)/Ni(t)]4 multilayers at different t.(c)The t dependence of the saturation magnetization(MS),coercive field(HC),anisotropic field(HK),anomalous Hall resistivity(ρxy),and resistivity(ρxx).

3.Results and discussion

3.1.Current-driven switching of magnetization for the PMA[Pt(2-t)/Ni(t)]4 multilayer

We investigated the current-driven magnetization switching for the [Pt(2-t)/Ni(t)]4multilayers with PMA fromt=1.65 tot=1.85.A series of current pulses with a 50 µs duration are applied to the Hall bar device along thexdirection.The in-plane bias field (Hx) is necessary to be applied along with the current, which can assist in deterministic magnetization switching.Figure 2(a) shows the current-driven magnetization switching curves for the [Pt(2-t)/Ni(t)]4multilayer att=1.65 withHxfrom-800 Oe to 800 Oe, which exhibit clockwise and counterclockwise polarity with positive and negativeHx,respectively.This is opposite to that of Pt/Co bilayer, which is due to the negative anomalous Hall coefficient of Ni compared with the positive anomalous Hall coefficient of Co.[28]

Furthermore,the critical current density(JC)as a function ofHxwith differenttis shown in Fig.2(b), which decreases monotonically with the increase of|Hx|.This is becauseJCis expressed as[29]

wheree,µ0,tFM, ¯handξDLare the elementary charge, the permeability of vacuum, the thickness of the magnetic layer,the reduced Plank constant, and the damping-like SOT efficiency, respectively.Of course, the current-driven magnetization switching amplitude (Rxy/RAH) also decreases, when the magnetization of[Pt(2-t)/Ni(t)]4multilayer is gradually pulled into thex-yplane with|Hx|increasing.BecauseRxyis dependent on the magnetization of thezcomponent.[30]

We note that the current-driven magnetization switching of[Pt(2-t)/Ni(t)]4multilayer can be achieved even under the residual field (~10 Oe) of the PPMS, which might accidentally be mistaken as field-free current-driven magnetization switching.However, this is actually a significant advantage in spintronic application,because even a tinyHxcan break the symmetry in SOT process.We believe that the main reason should be that the Dzyaloshinskii-Moriya interaction (DMI)of[Pt(2-t)/Ni(t)]4multilayer is very small.It is well known that DMI represents an obstacle for current-driven magnetization switching.[31]

Subsequently, the thermal stability is estimated by the thermal stability factorΔT=Ku,effVFM/(kBT), considering a cylinder with typical diameter of 28 nm for MRAM nodes.[32]ΔTof these PMA[Pt(2-t)/Ni(t)]4multilayers are on the same order of magnitude as the previously reportedΔTof the applicable MRAM.[5]Obviously, our [Pt(2-t)/Ni(t)]4multilayer maintains the thermal stability and meets some application standards, which can be further optimized by MgO capping layer for practical applications.Therefore, [Pt(2-t)/Ni(t)]4multilayer indeed enriches the material system in the field of SOT.

Fig.2.(a)The current-driven switching of magnetization for the[Pt(2-t)/Ni(t)]4 multilayer at t=1.65 with different Hx.(b)The Hx dependence of JC and ΔRxy/RAH.

3.2.The harmonic Hall measurements

Next,in order to directly evaluate the current-driven magnetization switching for the [Pt(2-t)/Ni(t)]4multilayers, we quantified the damping-like SOT efficiency(ξDL)by employing the extended harmonic Hall measurement.The harmonic Hall measurement geometry is shown in Fig.3(a).A sinusoidal current with a frequency of 521 Hz was applied along thexdirection,and then the second harmonic Hall resistances(R2ω)were obtained under a constant external magnetic field(Hext)rotating in thex-yplane.The azimuthal angle(φ)is betweenHextand the current.Theφdependence ofR2ωfor the[Pt(2-t)/Ni(t)]4multilayers att=1.65 is shown in Fig.3(b)under a series ofHext.Usually, the second harmonic Hall resistancesR2ωcan be expressed as[33]

whereRAHis the anomalous Hall resistance,HDLis the damping-like SOT effective field,HKis the effective anisotropy field,defined asHK=Hani-Hdem,withHaniandHdembeing the anisotropy field and the demagnetization field,respectively,RPHis the planar Hall resistance,HFLis the fieldlike SOT effective field, andHOeis the Oersted field.R0ΔTis the thermoelectric contribution forR2ω, which needs to be ruled out.

According to Eq.(2), we calculated and plotted the-R[cosφ]/RAHvs.1/(Hext-HK) curves under differentHext,the damping-like field(HDL)was obtained as the slope of linear fitting,as shown in Fig.3(c).Furthermore,ξDLwas calculated by[34]

whereJeis the current density of the Pt layer.Here, we assume that all Pt land Ni layers are simplified as Pt/Ni bilayer.The variation ofξDLas a function oftis plotted in Fig.3(d),which shows an almost decreasing trend.It reveals a noticeable trend:ξDLin the[Pt(2-t)/Ni(t)]4multilayer diminishes rapidly from 0.125(t=1.55 nm)to 0.035(t=1.85 nm).This observation indicates a direct influence of the thicknesstof the Pt layer in the periodic structure on the SOT of the multilayer film.In the [Pt(2-t)/Ni(t)]4configuration, two SOT sources contribute to the damping torque: the bulk spin Hall effect(SHE)in the Pt layer and the Rashba effect at the Pt/Ni interface.[26]In typical bilayer film systems such as Pt/Co,Pt/Fe,and Pt/Ni,the generation of damping-like torque is originated from the SHE of the Pt layer in the specific context of SHE.Consequently,it follows that the thickness of the Pt layer directly affectsξDLin the Pt/Ni multilayer structure.[23]

We have completely adopted a Pt/Ni bilayer in the above description and discussion, just like the classical Pt/Co bilayer in the specific context of SHE.However, the original consideration as Pt/Ni bilayer is not very accurate, as our[Pt(2-t)/Ni(t)]4multilayer seems to be more similar to a PtNi alloy in terms of material preparation,although the corresponding properties can be well explained considering as Pt/Ni bilayer.But if[Pt(2-t)/Ni(t)]4multilayer is simply regarded as a PtNi alloy,it is difficult to explain the significant current driven magnetization switching andξDLin [Pt(2-t)/Ni(t)]4multilayer.Because there should be no net spin current flowing in a uniform PtNi alloy.We think that the main reason is that the film quality gradient always exists in thez-direction,which leads to the net SOT in[Pt(2-t)/Ni(t)]4multilayer.Because the contribution of Pt/Ni at the lower interface to SOT is always greater than that of Ni/Pt at the upper interface,similar to previous reports.Therefore, considering [Pt(2-t)/Ni(t)]4multilayer as Pt/Ni bilayer is more reasonable than considering[Pt(2-t)/Ni(t)]4multilayer as a PtNi alloy.

Fig.3.(a) Schematic of the harmonic Hall measurement geometry.(b) The φ dependence of R2ω under different H.The inset illustrates the harmonic Hall measurement geometry (c) The -Rcosφ/RAH vs.1/(Hext-HK)curves at different t.(d)The t dependence of ξDL.

In comparison to Pt/Co and Pt/Fe bilayer films,the Pt/Ni system exhibits weaker interface SOC and magnetic proximity effects.Consequently, it experiences a smaller spin backflow phenomenon and spin memory loss at the interface.[35]As a result, in most cases, it is reasonable to consider that the damping-like torque in Pt/Ni systems primarily originates from the bulk spin Hall effect(SHE)of the heavy metal layer Pt, while the contribution from the Rashba effect at the interface is relatively minor.Furthermore,the interface Rashba field can be modulated by varying the number of periodic layers.[35]However, in this experiment, the number of periodic layers is fixed at 4, and only the thickness (t) is varied.Therefore, the contribution of the interface Rashba effect remains unchanged with the thicknesst.Hence, our analysis can focus solely on the SHE contribution of the Pt layer.

To investigate the origin of the damping-like torque in the[Pt (2-t)/Ni(t)]4multilayer film structure, we can begin by examining a symmetrical three-layer film structure consisting of Pt/Ni/Pt,where the thicknesses of the top and bottom Pt layers are equal.Since the top and bottom Pt layers have equal thickness in the Pt/Ni/Pt three-layer film structure, and considering the SHE,the majority of the spin current contribution from the Pt layer is anticipated to have the same magnitude but opposite spin directions.Theoretically, this implies that the damping-like torque experienced by the middle Ni layer should cancel out due to the opposing spin currents.Consequently, in the [Pt(2-t)/Ni(t)]4multilayer film, only the top Ni layer is affected by the damping torque generated by the current flowing through the lower Pt layer.As a result,the damping-like switching efficiency of the Pt layer thickness within the range of 0.15-0.45 nm is expected to be extremely low.

However, as shown in the SOT tests and the second harmonic tests in Figs.2 and 3,it has been demonstrated that the damping torque efficiency in the [Pt(2-t)/Ni(t)]4multilayer film is still very significant, close to the torque efficiency of Pt/Ni in the literature(~0.05),[36]which means that the spin current from the Pt layer has not been completely offset.This means that the asymmetry between the top Ni/Pt and bottom Pt/Ni interfaces of the multilayer film is the key to the existence of a large damping torque in the symmetric three layers.

In the SOT study of Pt/Co multilayers with similar structures, there are different interface structures between Co/Pt and Pt/Co.The bottom Pt/Co exhibits a chemically sharp interface,but the top Co/Pt is slightly intermixed during the sputtering process,which may be the reason for the obvious dampinglike torque.[37]This can also be used to explain the cause of symmetry breaking of the Pt/Ni system.Meanwhile,considering that the thickness of the Pt layer is relatively smaller compared to the Ni layer,as the Pt thickness increases,the increase in interface mixing may change the interface difference,which may also lead toξDLincreasing.

4.Conclusion

In this work, we have successfully fabricated a series of perpendicular magnetized [Pt(2-t)/Ni(t)]4multilayers and studied the SOTs as a function of the thickness of Ni layer.The damping-like SOT efficiencyξDLwas extracted from an extended harmonic Hall measurement.We find that theξDLincreases with increasing thetPt/tNiratio due to pronounced contribution from the Pt layers.Our experimental results indicate that the perpendicularly magnetized Ni/Pt multilayers have a sizeable SOT efficiency which can be tuned by thetPt/tNiratio,and could be a promising material for the future SOT-MRAM.

Data availability statement

The data that support the findings of this study are openly available in Science Data Bank at https://doi.org/10.57760/sciencedb.j00113.00126.

Acknowledgements

Project supported by the National Key R&D Program of China (Grant No.2021YFB3502400), the National Natural Science Foundation of China (Grant Nos.52061135105,12074025, 11834013, and 12274203), the CAS Project for Yong Scientists in Basic Research (Grant No.YSBR-030),and the Key Research Project of Frontier Science of Chinese Academy of Sciences (Grant Nos.XDB44000000 and XDB28000000).

展开全文▼

猜你喜欢

志成大海
大海捞金
众志成诚迎战特大暴雨
大海才是我的家
问大海
大海依旧在那儿
冬日的大海
连志成:一心向战
令人兴奋的大海
周志成:我们要从跟跑迈向领跑
天天都是感恩节