《天津大学学报(自然科学与工程技术版)》2022年总目次
2023-01-25
《天津大学学报(自然科学与工程技术版)》2022年总目次
[综述]长寿命高可靠性焊接结构……………………………………………………………………………………………徐连勇(1)
[综述]合成聚合物衍生硬碳在钠离子电池中的研究进展……………………………………………李 瑀,付浩宇,封 伟(11)
转盘式能量回收装置中滑阀的间隙液膜力学特性及结构优化…………………………………王 越,张 衡,周 杰,等(24)
结构光熔池传感中反射图的递归选区处理算法…………………………………………………程方杰,李立东,武少杰(33)
碱性膜燃料电池阳极双催化层结构与性能研究…………………………………………………尹 燕,刘 洋,祝伟康,等(40)
钢衬钢筋混凝土管道开裂机理及模拟技术研究…………………………………………………马 铢,伍鹤皋,石长征(46)
复合齿槽劲性连接预制剪力墙抗剪性能试验研究………………………………………………张锡治,李福林,李雅楠,等(57)
FRP约束矩形高强钢管混凝土长柱轴压性能有限元分析………………………………………杜颜胜,高鼎辉,陈志华,等(66)
天津承压含水层粉土渗透特性试验研究…………………………………………………………郑 刚,王佳琳,佟婧博,等(77)
SMFC在河口底泥产电及有机质去除中的应用…………………………………………………张金凤,史高创,孙竹腾,等(85)
缓波形立管的复合构型响应分析…………………………………………………………………余 杨,吴凡蕾,余建星,等(90)
入湖三角洲水道结构对流量的随机响应试验研究…………………………………………………徐海珏,宋晓龙,白玉川(101)
新型变形轮腿式移动机器人的运动学分析及设计……………………………………………宋轶民,郝呈晔,岳维亮,等(111)
基于多阶段退化建模的谐波减速器实时可靠性评估与寿命预测……………………………王国锋,曹增欢,冯海生,等(122)
线驱动仿海豹尾部推进机构设计与运动学分析………………………………………………刘玉红,刘书赫,邓仕晗,等(133)
2D-3D配准中的初始位姿估计方法……………………………………………………………孙 涛,郭 可,刘传耙,等(143)
基于代价地图的活检路径规划研究……………………………………………………………杨志永,房培娜,刘琬钰,等(151)
4WID车辆主动安全控制策略研究……………………………………………………………毕凤荣,孙浩轩,张立鹏,等(158)
基于刀具磨损状态识别的加工参数多目标优化………………………………………………田 颖,王文豪,杨利明,等(166)
面向非合作目标的柔性捕获器设计与动力学建模…………………………………………………康荣杰,周永翔,杨铖浩(174)
丝传动3-SR并联机构运动学分析与力反馈控制……………………………………………王攀峰,王 星,郭 璠,等(184)
内置偏心转子式波浪能发电装置的动力学研究………………………………………………薛 钢,刘延俊,薛祎凡,等(191)
电场对中间神经元亚线性树突整合的调制作用………………………………………………魏熙乐,樊亚琴,赵美佳,等(199)
基于稀疏过零点信息的抗幅值失真时延估计方法…………………………………………………唐 俊,汪 照,白宇田(211)
基于可重构虎克铰链副的仿人变胞手设计与分析……………………………………………戴建生,安 伟,王瑞钦,等(221)
机器人辅助实质器官手术的止血切割器械设计………………………………………………李建民,庞兴旺,孔 康,等(230)
一种基于低速、小振幅周期运动CFD数值模拟的水下滑翔机附加质量求解方法…………张连洪,张宇航,杨绍琼,等(239)
基于无监督学习的三维肺部CT图像配准方法研究…………………………………………姜 杉,张红运,杨志永,等(247)
基于近邻子空间划分的高光谱影像波段选择方法……………………………………………………………唐 厂,王 俊(255)
镜像铣加工过程中薄壁工件变形和振动的预测………………………………………………王建山,何天宇,肖聚亮,等(263)
面向骨折手术的三支链六自由度并联机构设计………………………………………………王 蕊,霍欣明,连宾宾,等(273)
基于GTN模型的小冲孔高温拉伸性能表征…………………………………………………赵 雷,王 逊,徐连勇,等(283)
基于改进烟花算法的中俄商品多式联运路径优化…………………………………………………万 杰,龙云飞,陈星瀚(291)
基于混合注意力机制和相关性估计网络的点云配准算法……………………………………何 凯,李大双,马希涛,等(299)
基于骨架的自适应尺度图卷积动作识别………………………………………………………王小娟,钟 云,金 磊,等(306)
明渠紊流中淹没柔性植被流固耦合大涡数值模拟……………………………………………许 栋,梁心雅,张炳昌,等(313)
水库多级兴利调度图编制方法研究与应用……………………………………………………李晓英,崔 威,郭宜薇,等(322)
超分子凝胶剂对海绵的表面改性及油水分离性能研究………………………………………宋 健,贾 婧,张宝浩,等(331)
基于逐层建模的电弧增材制造过程有限元仿真方法………………………………………………程方杰,李璐菲,武少杰(337)
多喷嘴对置式煤气化炉激冷室颗粒运动及碰撞特性研究……………………………………刘丽艳,石 凯,吴 桐,等(343)
基于GBDT算法的Fe-36Ni/304L搭接接头特征尺寸及性能预测…………………………申俊琦,王 谦,胡绳荪,等(350)
禁食对小鼠下丘脑磷酸化蛋白质组的影响……………………………………………………王梦凡,洪 杰,王倩倩,等(357)
基于热流固耦合的微通道冷却系统模拟………………………………………………………潘艳秋,张春超,张 威,等(364)
基于运行特性和生命周期理论的综合能源系统优化方法……………………………………苏万华,邱俊松,邬斌扬,等(371)
高海拔模拟环境下柴油机燃烧粗暴可视化试验研究…………………………………………崔宇航,卫海桥,王祥庭,等(383)
基于实际竖向荷载分布的波纹钢板剪力墙轴压屈曲分析…………………………………………赵秋红,高俊秀,邱 静(391)
寒区方高强钢管-混凝土组合柱轴压性能研究…………………………………………………严加宝,骆艳丽,林旭川,等(402)
基于有限差分方法的橡胶坝挡水性能分析及简化设计………………………………………郭 伟,李嘉骏,高 鑫,等(411)
大变形埋地钢管结构承载能力及修复方法研究………………………………………………于金弘,伍鹤皋,石长征,等(419)
预制混凝土管组合柱-钢梁节点核心区受力性能分析…………………………………………张锡治,李星乾,章少华,等(428)
热弯残余应力对H型钢拱结构平面内稳定承载力的影响…………………………………………芦 燕,王明威,宋浩然(441)
全干法连接装配式夹芯剪力墙结构抗震性能研究……………………………………………龚永智,柯福隆,谭 涛,等(451)
计及弹性响应的需求侧资源与软开关联合规划………………………………………………葛少云,李俊锴,刘 洪,等(462)
基于逐级信息恢复网络的实时目标检测算法…………………………………………………庞彦伟,余 珂,孙汉卿,等(471)
一种基于高阶内模的新型自适应迭代学习算法………………………………………………………………张国山,李思祺(480)
基于交叠网格模型的WSN抗捕获攻击密钥管理方法…………………………………………于洁潇,周俊豪,王洪帅,等(489)
基于ISRUKF的UWB/INS组合室内定位方法研究…………………………………………邹 强,陆甫光,兰馗博,等(496)
宽带高效率二倍频器的设计…………………………………………………………………………傅海鹏,郑玉学,陆 敏(504)
轮胎-路面三维力解析模型的建立与简化方法…………………………………………………刘庆纲,宋皓杰,郭 昊,等(512)
结合三反消像散光学系统的中阶梯光栅光谱仪设计………………………………………………张尹馨,段文浩,李婉卓(519)
基于区块链和神经网络的威胁情报评估……………………………………………………………史慧洋,刘 鹏,王 鹤(527)
基于特征融合的深度学习点云补全算法………………………………………………………赵毅强,周意遥,胡 彬,等(535)
基于关键点特征融合的六自由度位姿估计方法………………………………………………………………王太勇,孙浩文(543)
断续节理岩体波传播试验装置的研制及其标定………………………………………………朱建波,黄超民,翟天琦,等(553)
常温和高温下不锈钢圆柱头栓钉抗剪性能研究………………………………………………范圣刚,周 航,韩云龙,等(562)
酸雨腐蚀RC梁柱节点抗震性能及恢复力模型研究…………………………………………尚志刚,郑山锁,郑 淏,等(571)
不同潮汐水位下深厚滩涂软土路基长期沉降规律及预测研究……………………………………雷华阳,万勇峰,冯双喜(584)
扭矩与外压联合作用下海底管道的屈曲研究…………………………………………………余 杨,胡少谦,韩梦雪,等(596)
复合筒型基础临界负压试验分析………………………………………………………………丁红岩,许云龙,张浦阳,等(603)
爆炸荷载作用下装配式钢筋混凝土板抗爆性能试验研究……………………………………周兆鹏,闫秋实,田栓柱,等(611)
玻璃纤维网格超高性能混凝土板抗弯性能试验研究…………………………………………邓宗才,鹿宇浩,龚明高,等(621)
木糖渣酶解耦合机械处理制备球形纳米纤维素………………………………………………苏荣欣,王洁樱,黄仁亮,等(632)
矿井降温系统压力交换装置热混合过程研究…………………………………………………王 越,乔晓宇,周 杰,等(639)
哮喘抑制剂WHYAHNW的理性设计…………………………………………………………………………张 麟,李南星(649)
藜麦营养组分与加工品质的相关性分析………………………………………………………李进才,朱凯莉,刘梦杰,等(655)
基于对偶模型的超低含液率湿气双参数测量方法……………………………………………徐 英,王森菱,张 涛,等(665)
基于超声影像的甲状腺结节智能分割算法……………………………………………………曹玉珍,郑 洁,余 辉,等(674)
基于字典设计的正交线性调频信号复用水声通信系统………………………………………付晓梅,马馨玉,王思宁,等(682)
基于注意力机制的雷达信号分选算法…………………………………………………………郭立民,聂新文,陈 涛,等(690)
基于标准CMOS工艺的光电浮栅突触研究……………………………………………………谢 生,高旭斌,毛陆虹(701)
基于注意力机制的人脸表情识别网络…………………………………………………………………………张 为,李 璞(706)
基于分数阶傅里叶变换的声表面波涂层厚度检测……………………………………………林 滨,杜安尧,刘再蔚,等(714)
硫的掺杂对Co-N-C催化剂转移氢化性能的影响………………………………………………陈立功,姚 烁,王博威,等(721)
模块化工程大肠杆菌从头合成丁香酚…………………………………………………………赵广荣,曹嘉誉,马雅婷,等(728)
基于光学发动机的PODE燃烧特性试验研究…………………………………………………卫海桥,杨鹏晖,张少栋,等(737)
7075-T6高强铝合金轴心受压构件局部稳定试验研究…………………………………………支新航,王元清,李贝贝,等(745)
丝驱动连续体机器人的无模型自适应控制……………………………………………………李进华,卜逸凡,李晓阳,等(754)
气温概率分布及设计使用年限调整方法研究…………………………………………………范 重,张华青,牟在根,等(764)
粉质黏土中厚壁筒型基础静压沉放阻力研究…………………………………………………练继建,赵昊,刘润,等(775)
胶结砾质土心墙坝应力变形及裂缝扩展研究…………………………………………………………………刘东海,王静静(783)
海上风电四筒导管架基础下放过程试验研究…………………………………………………丁红岩,李彦娥,张浦阳,等(792)
基于TVF-EMD-PSO-GRU的月径流模型与应用研究…………………………………………王秀杰,张 帅,田福昌,等(802)
薄壁吸收塔内部浆液晃动减震机制及应用……………………………………………………宋 波,王希慧,徐明磊,等(811)
S30408不锈钢角焊缝低温力学性能试验……………………………………………………高喜峰,杨怡昕,刘红波,等(820)
钢桥塔的点云虚拟装配及其整体线形控制方法………………………………………………梁 栋,蒲 洁,赵 恺,等(828)
不锈钢工字形柱弱轴端板连接节点受力性能试验研究………………………………………袁焕鑫,高焌栋,杜新喜,等(839)
带翼缘钢筋混凝土剪力墙塑性铰长度研究…………………………………………………………王 斌,史庆轩,吴梦臻(848)
高温下螺栓球节点螺栓连接抗拉性能试验研究……………………………………………………刘红波,林思伟,张高青(862)
辛烷值敏感性对GCI发动机低负荷稳定性的影响……………………………………………卫海桥,张福强,张少栋,等(867)
不同压缩比对湍流射流点火发动机性能和爆震影响的试验研究……………………………周 磊,刘宗宽,李 潇,等(876)
多功能荧光探针用于次氯酸及微环境检测……………………………………………………陈立功,侯宇晴,崔思乾,等(887)
完全滑移区690TT合金管微动磨损特性研究……………………………………………………………………谭 蔚,田 策(895)
固态二氧化氯消毒剂的制备与性能研究………………………………………………………郭锦棠,宋巧巧,高田田,等(903)
冷却水流量对蒸发段上移的三相闭式重力热管传热性能的影响……………………………姜 峰,李瑞佳,齐国鹏,等(909)
碱改性生物炭-凹凸棒制备及其对水中磷的去除………………………………………………黄仁亮,龙禹璇,肖 瑶,等(919)
层间调控对层状双金属氢氧化物电化学性能的影响…………………………………………汪 洋,郑风华,潘钱锋,等(927)
超声冲击Q355钢叠形缺陷的形成及对疲劳性能的影响……………………………………刘秀国,刘子欣,王东坡,等(933)
集约型时间触发以太网拓扑优化方法…………………………………………………………汪 清,伍晨邦,陈 鹏,等(942)
基于动态卷积的胸部X光片疾病分类算法……………………………………………………………李 锵,赵启蒙,关 欣(953)
汽液通道结构对超薄热管性能的影响分析……………………………………………………甘云华,熊 瑭,罗奇梁,等(965)
U形钢板-混凝土组合梁拼接节点受拉试验研究………………………………………………严仁章,黄中河,闫春玲,等(973)
原位热塑成型内衬跨越圆形孔洞承压特性研究………………………………………………何春良,闫雪峰,马保松,等(988)
基于梯形槽结构的连续体手术器械弹性关节建模、仿真和实验验证…………………………王树新,孟晓伟,胡振璇(997)
立铣刀侧刃磨损检测的装置及方法……………………………………………………………田 颖,杨利明,郜占旭,等(1008)
基于振动信号融合的手术机器人椎板磨削剩余厚度识别……………………………………夏光明,王 瑞,张丽娜,等(1016)
基于LTC-RNN模型的中长期电力负荷预测方法……………………………………………邓斌,张楠,王江,等(1026)
基于科氏流量计和PSO-SVM的气液两相流测量研究………………………………………孙立军,刘 悦,童杰林,等(1034)
电动轻型车辆驱动用切向充磁永磁电机研究……………………………………………………陈学永,王晓远,高 鹏(1045)
基于抛物面焦点麦克风预处理和迁移学习的语音增强方法…………………………………张 涛,王泽宇,胡梦雪,等(1053)
考虑延时的孤岛微电网频率协同控制策略稳定性分析及改进……………………………………李志军,张牟发,张家安(1061)
基于PID型迭代学习控制算法的皮层网络节律调制…………………………………………王佶宣,邓 斌,王 江,等(1071)
基于分组注意力残差网络的锥束XLCT成像…………………………………………………周仲兴,郭司琪,贾梦宇,等(1082)
基于钽酸锂薄膜衬底的声表面波谐振器………………………………………………………杨清瑞,王志超,宋学毅,等(1093)
光栅投影真伪混合双目舌面三维成像方法……………………………………………………王 鹏,董美涵,孙长库,等(1101)
[综述]光谱力学方法与仪器的研究进展与发展趋势…………………………………………仇 巍,王晓洁,王志勇,等(1109)
连杆式差动平衡机构构型综合与优化设计……………………………………………………宋轶民,杨志岳,岳维亮,等(1120)
基于学习和模型相结合的光场超分辨率方法…………………………………………………杨敬钰,曾昕阳,卢 志,等(1130)
自适应混沌数据加密机制………………………………………………………………………张 磊,庞 科,徐江涛,等(1139)
热处理对不锈钢药芯焊丝堆焊过渡层的影响…………………………………………………张 智,王建硕,陈建国,等(1152)
肽配基仿生亲和介质的制备和抗体纯化性能研究…………………………………………………………史清洪,贾立霞(1159)
铜基改性吸附剂对磷化氢的吸附去除研究……………………………………………………………………黄国强,张 宇(1166)
城市污水处理厂中有机磷组分富集方法优化及机理分析……………………………………张钰婷,尚 巍,邱顺添,等(1174)
长距离输水管道检修通风SRM-CoRBF多保真代理模型研究……………………………王晓玲,丁超元,刘长欣,等(1182)
软磁复合材料球形感应电机定子磁场分析……………………………………………………李 斌,王思思,郝亚赛,等(1195)
基于信息-电力混合熵的边缘计算节点部署规划方法………………………………………季 浩,杨 挺,刘宇哲,等(1204)
面向CMOS温度传感器的低功耗数字滤波器设计…………………………………………赵毅强,赵鑫宇,何家骥,等(1212)
热再生氨基液流电池电堆模型建立及性能分析………………………………………………舒歌群,杨 爽,王伟光,等(1219)
进气道喷射氢发动机燃烧及爆震特性试验研究………………………………………………卫海桥,王 楠,李 卫,等(1230)
基于GAN的城市快递自提服务设施选址优化研究…………………………………………胡一可,温 雯,刘雅心,等(1237)
考虑人员密度分布的儿童医院候诊空间感染风险研究………………………………………刘 刚,张亦弛,曲冠华,等(1249)
自复位两边连接梯形波纹钢板剪力墙滞回性能分析…………………………………………………………谭志伦,赵秋红(1262)
网格强化波折钢板剪力墙滞回性能分析………………………………………………………窦 超,张 晗,杨 潇,等(1275)
预制装配式风机基础抗倾覆及受力特性研究…………………………………………………张浦阳,许云龙,丁红岩,等(1289)
基于组合赋权法的小波阈值降噪综合评价指标研究…………………………………………………………熊春宝,庞红星(1300)
水流对复合筒型基础波浪爬升影响机制的数值模拟研究……………………………………于通顺,宋昊阳,刘梅梅,等(1309)
盾构法重叠隧道施工过程中施工顺序及施工间隔对土体变形的影响研究…………………………………范 奇,张天奇(1318)
《天津大学学报(自然科学与工程技术版)》2022年总目次 ………………………………………………………………………(Ⅰ)
[REVIEW]Long-Life and High-Reliability Welded Structures………………………………………………………………………………………………………………………Xu Lianyong(1)
[REVIEW]Recent Progress of Synthetic Polymer-Derived Hard Carbon in Sodium-Ion Batteries…………………………………………………………………………………………………Li Yu,Fu Haoyu,Feng Wei(11)
Mechanical Characteristics of Clearance Liquid Films and Structural Optimization of Slide Valves of Rotary Energy Recovery Device………………………………………………………………………………Wang Yue,Zhang Heng,Zhou Jie,et al(24)
Recursive-Selective Processing Algorithm of a Reflection Image in Structured Light Weld Pool Sensing………………………………………………………………………………………Cheng Fangjie,Li Lidong,Wu Shaojie(33)
Structure and Performance of Anode Dual Catalyst Layer for Anion-Exchange Membrane Fuel Cell……………………………………………………………………………………Yin Yan,Liu Yang,Zhu Weikang,et al(40)
Research on the Cracking Mechanism and Simulation Technology of Steel-Lined Reinforced Concrete Penstock…………………………………………………………………………………………Ma Zhu,Wu Hegao,Shi Changzheng(46)
Experimental Study on Shear Behavior of Precast Shear Wall with Composite Alveolar Connections……………………………………………………………………………………Zhang Xizhi,Li Fulin,Li Yanan,et al(57)
Finite Element Analysis of Axial Compression Behavior of FRP Confined Rectangular High-Strength Concrete-Filled Steel Tubular Long Columns……………………………………………Du Yansheng,Gao Dinghui,Chen Zhihua,et al(66)
Experimental Study of Silt Permeability Characteristics of Tianjin Compressed Aquifer……………………………………………………………………………Zheng Gang,Wang Jialin,Tong Jingbo,et al(77)
Application of SMFC in Power Generation and Organic Matter Removal in Estuaries…………………………………………………………………………Zhang Jinfeng,Shi Gaochuang,Sun Zhuteng,et al(85)
Response Analysis of Compound Configuration of LwSCR………………………………………………………………………………………Yu Yang,Wu Fanlei,Yu Jianxing,et al(90)
Experiments on Stochastic Response Characteristics of Lacustrine Deltaic Channels to Discharge…………………………………………………………………………………Xu Haijue,Song Xiaolong,Bai Yuchuan(101)
Kinematic Analysis and Design of a Novel Transformable Wheeled-Legged Mobile Robot…………………………………………………………………………Song Yimin,Hao Chengye,Yue Weiliang,et al(111)
Real-Time Reliability Evaluation and Life Prediction of Harmonic Reducer Based on Multistage Degradation Modeling………………………………………………………………………Wang Guofeng,Cao Zenghuan,Feng Haisheng,et al(122)
Design and Kinematics Analysis of a Wire-Driven Propulsion Mechanism Inspired by the Seal Aft Fin……………………………………………………………………………Liu Yuhong,Liu Shuhe,Deng Shihan,et al(133)
Initial Pose Estimation Method in 2D/3D Registration………………………………………………………………………………………Sun Tao,Guo Ke,Liu Chuanba,et al(143)
Path Planning for Biopsy Based on Cost Map………………………………………………………………………………Yang Zhiyong,Fang Peina,Liu Wanyu,et al(151)
Research on the Active Safety Control of the 4WID Vehicle……………………………………………………………………………Bi Fengrong,Sun Haoxuan,Zhang Lipeng,et al(158)
Multi-Objective Optimization of Machining Parameters Based on Tool Wear Condition………………………………………………………………………………Tian Ying,Wang Wenhao,Yang Liming,et al(166)
Design and Dynamic Modeling of a Flexible Catcher for Noncooperative Targets…………………………………………………………………………Kang Rongjie,Zhou Yongxiang,Yang Chenghao(174)
Kinematics Analysis and Force Feedback Control of Wire-Driven 3-SR Parallel Mechanism……………………………………………………………………………Wang Panfeng,Wang Xing,Guo Fan,et al(184)
Dynamic Study of the Wave Energy Converter with Inner Eccentric Rotor………………………………………………………………………………Xue Gang,Liu Yanjun,Xue Yifan,et al(191)
Modulation Effect of Electric Fields on Sublinear Dendritic Integration of the Interneuron……………………………………………………………………………………Wei Xile,Fan Yaqin,Zhao Meijia,et al(199)
Anti-Amplitude Distortion Time Delay Estimation Method Based on Sparse Cross-Zero Information………………………………………………………………………………………Tang Jun,Wang Zhao,Bai Yutian(211)
Design and Analysis of a Humanoid Metamorphic Hand Based on Reconfigurable Hooke Joints…………………………………………………………………………Dai Jiansheng,An Wei,Wang Ruiqin,et al(221)
Bloodless Cutting Device Design for Robot-Assisted Solid Organ Surgery…………………………………………………………………………Li Jianmin,Pang Xingwang,Kong Kang,et al(230)
Method for Solving Added Mass of Underwater Glider Based on CFD of Low-Speed and Small-Amplitude Periodic Motion…………………………………………………………………Zhang Lianhong,Zhang Yuhang,Yang Shaoqiong,et al(239)
Research on a 3D Lung Computed TomographyImage Registration Method Based on Unsupervised Learning…………………………………………………………………………Jiang Shan,Zhang Hongyun,Yang Zhiyong,et al(247)
A Hyperspectral Band Selection Method via Adjacent Subspace Partition…………………………………………………………………………………………………Tang Chang,Wang Jun(255)
Prediction of Deflection and Vibration of Thin-Walled Workpiece During Mirror-Milling Process……………………………………………………………………………Wang Jianshan,He Tianyu,Xiao Juliang,et al(263)
Developing Three-Legged Six-Degree-of-Freedom Parallel Mechanism for Bone Reduction Surgery……………………………………………………………………………Wang Rui,Huo Xinming,Lian Binbin,et al(273)
Characterization of High-Temperature Tensile Properties of Small Punch Test Based on the GTN Model……………………………………………………………………………Zhao Lei,Wang Xun,Xu Lianyong,et al(283)
Optimization of Multimodal Transport Route of Chinese and Russian Commodities Based on Improved Fireworks Algorithm…………………………………………………………………………………Wan Jie,Long Yunfei,Chen Xinghan(291)
A Point Cloud Registration Algorithm Using a Mixed Attention Mechanism and Correlation Estimation Network……………………………………………………………………………………He Kai,Li Dashuang,Ma Xitao,et al(299)
Scale Adaptive Graph Convolutional Network for Skeleton-Based Action Recognition………………………………………………………………………………Wang Xiaojuan,Zhong Yun,Jin Lei,et al(306)
Large Eddy Simulation of Submerged Flexible Vegetation Fluid-Solid Coupling in Open Channel Turbulent Flow……………………………………………………………………………Xu Dong,Liang Xinya,Zhang Bingchang,et al(313)
Research and Application for Drawing Method of Multilevel Reservoir Operation Chart…………………………………………………………………………………Li Xiaoying,Cui Wei,Guo Yiwei,et al(322)
Supramolecular Gelator Modified Melamine Sponge for Efficient Oil/Water Separation………………………………………………………………………………Song Jian,Jia Jing,Zhang Baohao,et al(331)
Finite Element Simulation Method of Wire Arc AdditiveManufacturing Process Based on Layer-by-Layer Modeling…………………………………………………………………………………Cheng Fangjie,Li Lufei,Wu Shaojie(337)
Particles Motion and Collision Characteristics of Water-Scrubbing Cooling Chamber in an Opposed Multi-Burner Gasifier…………………………………………………………………………………Liu Liyan,Shi Kai,Wu Tong,et al(343)
Prediction of Feature Size and Performance of Fe-36Ni/304L Lap Joint Based on GBDT Algorithm…………………………………………………………………………Shen Junqi,Wang Qian,Hu Shengsun,et al(350)
Effect of Fasting on the Phosphoproteome of Mouse Hypothalamus…………………………………………………………………………Wang Mengfan,Hong Jie,Wang Qianqian,et al(357)
Simulation of a Microchannel Cooling System Based on Thermal-Fluid-Solid Coupling…………………………………………………………………………Pan Yanqiu,Zhang Chunchao,Zhang Wei,et al(364)
Integrated Energy System Optimization Method Based on the Equipment Operating Characteristics and Life Cycle Theory……………………………………………………………………………Su Wanhua,Qiu Junsong,Wu Binyang,et al(371)
Optical Experiments on Diesel Knock Under Simulated High-Altitude Conditions…………………………………………………………………………Cui Yuhang,Wei Haiqiao,Wang Xiangting,et al(383)
Axial Compressive Buckling of Corrugated Steel Plate Shear Walls Under Actual Vertical Load Distribution…………………………………………………………………………………Zhao Qiuhong,Gao Junxiu,Qiu Jing(391)
Studies on Axial Compressive Behavior of Square Concrete Filled-High-Strength Steel Tube Columns in Cold Regions………………………………………………………………………………Yan Jiabao,Luo Yanli,Lin Xuchuan,et al(402)
Water Resistance Analysis of Rubber Dam and Its Simplified Design Method Based on Finite Difference Method……………………………………………………………………………………Guo Wei,Li Jiajun,Gao Xin,et al(411)
Structural Bearing Capacity and Rehabilitation Method of Buried Steel Pipes Subjected to Large Deformation…………………………………………………………………………Yu Jinhong,Wu Hegao,Shi Changzheng,et al(419)
Mechanical Behavior Analysis of Panel Zone in Concrete-Filled Precast Concrete Tube Column-to-Steel Beam Connections………………………………………………………………………Zhang Xizhi,Li Xingqian,Zhang Shaohua,et al(428)
Effect of Hot-Bent Residual Stress on In-Plane Stability Bearing Capacity of H-Section Steel Arch Structures………………………………………………………………………………………Lu Yan,Wang Mingwei,Song Haoran(441)
Seismic Behavior of Assembled Sandwich Shear Wall Structure Connected by Full Dry Method…………………………………………………………………………………Gong Yongzhi,Ke Fulong,Tan Tao,et al(451)
Coordinated Planning of Soft Open Points and Demand-Side Resources Considering an Elastic Response…………………………………………………………………………………Ge Shaoyun,Li Junkai,Liu Hong,et al(462)
Hierarchical Information Recovery Network for Real-Time Object Detection………………………………………………………………………Pang Yanwei,Yu Ke,Sun Hanqing,et al(471)
A New Adaptive Iterative Learning Algorithm Based on a High-Order Internal Model…………………………………………………………………………………………………Zhang Guoshan,Li Siqi(480)
Overlapping Grid Model-Based Key Management Method to Anti-Capture Attack in a WSN…………………………………………………………………………Yu Jiexiao,Zhou Junhao,Wang Hongshuai,et al(489)
UWB/INS Combined Indoor Positioning Method Based on ISRUKF…………………………………………………………………………Zou Qiang,Lu Fuguang,Lan Kuibo,et al(496)
Design of the Wideband and High-Efficiency Frequency Doubler…………………………………………………………………………………Fu Haipeng,Zheng Yuxue,Lu Min(504)
Establishment and Simplification of Tyre-Pavement 3D Force Analysis Model……………………………………………………………………………Liu Qinggang,Song Haojie,Guo Hao,et al(512)
Design of Echelle Spectrometer with a Three-Mirror Anastigmat System……………………………………………………………………………Zhang Yinxin,Duan Wenhao,Li Wanzhuo(519)
Threat Intelligence Evaluation Based on Blockchain and a Neural Network……………………………………………………………………………………Shi Huiyang,Liu Peng,Wang He(527)
Deep Learning Point Cloud Completion Algorithm via Feature Fusion………………………………………………………………………Zhao Yiqiang,Zhou Yiyao,Hu Bin,et al(535)
Six Degrees of Freedom Pose Estimation Based on Keypoints Feature Fusion………………………………………………………………………………………Wang Taiyong,Sun Haowen(543)
Development and Calibration of Wave Propagation Test Device for Non-Persistent Jointed Rock Mass…………………………………………………………………………Zhu Jianbo,Huang Chaomin,Zhai Tianqi,et al(553)
Shear Performance of Stainless Cylindral Head Steel Stud at Room and High Temperatures…………………………………………………………………………Fan Shenggang,Zhou Hang,Han Yunlong,et al(562)
Seismic Behavior and Restoring Force Model of RC Beam-Column Joints Affected by Acid Rain Corrosion…………………………………………………………………Shang Zhigang,Zheng Shansuo,Zheng Hao,et al(571)
Study on Long-Term Settlement Law and Prediction of Deep Beach Soft Soil Subgrade Under Different Tidal Levels………………………………………………………………………Lei Huayang,Wan Yongfeng,Feng Shuangxi(584)
Buckling of Submarine Pipe Under Combined Loads of Torsion and External Pressure……………………………………………………………………………Yu Yang,Hu Shaoqian,Han Mengxue,et al(596)
Experimental Analysis on Critical Suction of Composite Bucket Foundation………………………………………………………………………Ding Hongyan,Xu Yunlong,Zhang Puyang,et al(603)
Experimental Study on Antiexplosion Performance of Precast Concrete Slabs Under Explosion Load……………………………………………………………………Zhou Zhaopeng,Yan Qiushi,Tian Shuanzhu,et al(611)
Flexural Performance of Ultra-High Performance Concrete Slabs with Glass Fiber Net…………………………………………………………………………Deng Zongcai,Lu Yuhao,Gong Minggao,et al(621)
Preparation of Spherical Nanocellulose Using Enzymatic Hydrolysis and Mechanical Treatment from Corncob Residues……………………………………………………………………Su Rongxin,Wang Jieying,Huang Renliang,et al(632)
Thermal Mixing Process of a Pressure Exchange Device in a Mine Cooling System……………………………………………………………………………Wang Yue,Qiao Xiaoyu,Zhou Jie,et al(639)
Rational Design of Asthma Inhibitor WHYAHNW………………………………………………………………………………………………………Zhang Lin,Li Nanxing(649)
Correlation Analysis Between the Nutritional Component and Processing Quality of Quinoa………………………………………………………………………………Li Jincai,Zhu Kaili,Liu Mengjie,et al(655)
Dual-Parameter Measurement Method for Ultra-Low Liquid Volume Fraction Wet Gas Based on Dual-Model………………………………………………………………………Xu Ying,Wang Senling,Zhang Tao,et al(665)
Intelligent Segmentation of Thyroid Nodules Based on Ultrasound Images………………………………………………………………………………Cao Yuzhen,Zheng Jie,Yu Hui,et al(674)
Dictionary Design Based Orthogonal Chirp Division Multiplexing Underwater Acoustic Communication System……………………………………………………………………Fu Xiaomei,Ma Xinyu,Wang Sining,et al(682)
Radar Signal Sorting Algorithms Based on Attention Mechanisms……………………………………………………………………Guo Limin,Nie Xinwen,Chen Tao,et al(690)
Photoelectric Floating-Gate Synapse Based on Standard CMOS Process…………………………………………………………………………………Xie Sheng,Gao Xubin,Mao Luhong(701)
Facial Expression Recognition Network Based on Attention Mechanism……………………………………………………………………………………………………………Zhang Wei,Li Pu(706)
Film Thickness Detection Using a Surface Acoustic Wave Based on the Fractional Fourier Transform…………………………………………………………………………………Lin Bin,Du Anyao,Liu Zaiwei,et al(714)
Influence of Doped Sulfur on the Catalytic Transfer Hydrogeneration Performance over Co-N-C Catalyst…………………………………………………………………………Chen Ligong,Yao Shuo,Wang Bowei,et al(721)
Modular Engineering offorProduction of Eugenol…………………………………………………………………Zhao Guangrong,Cao Jiayu,Ma Yating,et al(728)
Experimental Investigation of Combustion Characteristics of Polymethoxy Dimethyl Ether in an Optical Engine……………………………………………………………………Wei Haiqiao,Yang Penghui,Zhang Shaodong,et al(737)
Experimental Study on Local Buckling Behavior of 7075-T6 High-Strength Aluminum Alloy Stub Columns Under Axial Compression…………………………………………………Zhi Xinhang,Wang Yuanqing,Li Beibei,et al(745)
Model-Free Adaptive Control for Tendon-Driven Continuum Robots………………………………………………………………………………Li Jinhua,Bu Yifan,Li Xiaoyang,et al(754)
Probability Distribution of Air Temperature and Adjustment Method of Design Service Life…………………………………………………………………………Fan Zhong,Zhang Huaqing,Mu Zaigen,et al(764)
Study on Static Pressure Sedimentation for Thick-Walled Bucket Foundation in Silty Clay………………………………………………………………………………Lian Jijian,Zhao Hao,Liu Run,et al(775)
Study on Stress Deformation and Crack Propagation of Rock-Fill Dam with Cemented Gravel Soil Core………………………………………………………………………………………………Liu Donghai,Wang Jingjing(783)
Experimental Investigation of an Offshore Wind Turbine Four-Bucket JacketFoundation During Lowering Operation…………………………………………………………………Ding Hongyan,Li Yan’e,Zhang Puyang,et al(792)
Monthly Runoff Model and Application Based on TVF-EMD-PSO-GRU………………………………………………………………………Wang Xiujie,Zhang Shuai,Tian Fuchang,et al(802)
Shock Absorption Mechanism and Application of Slurry Sloshing in Thin-Walled Absorption Tower………………………………………………………………………………Song Bo,Wang Xihui,Xu Minglei,et al(811)
Experimental Study on Mechanical Properties of Fillet Weld Connections of S30408 Stainless Steel in Low Temperature…………………………………………………………………………Gao Xifeng,Yang Yixin,Liu Hongbo,et al(820)
Point Cloud Virtual Assembly of Steel Bridge Towers and Its Overall Linear Control Method…………………………………………………………………………………Liang Dong,Pu Jie,Zhao Kai,et al(828)
Experimental Study of the Structural Behavior of the Stainless Steel End-Plate Minor-Axis Joint of an I-Section Column…………………………………………………………………………Yuan Huanxin,Gao Jundong,Du Xinxi,et al(839)
Research on Plastic Hinge Length of RC Shear Walls with Flange…………………………………………………………………………………Wang Bin,Shi Qingxuan,Wu Mengzhen(848)
Experimental Study of the Tensile Performance of Bolt-Ball Connections in Bolt Ball Joint at High Temperatures…………………………………………………………………………………Liu Hongbo,Lin Siwei,Zhang Gaoqing(862)
Effects of Octane Sensitivity on Low Load Combustion Stability of Gasoline Compression Ignition Engines……………………………………………………………………Wei Haiqiao,Zhang Fuqiang,Zhang Shaodong,et al(867)
Experimental Study of the Effects of Different Compression Ratios on the Performance and Knock Characteristics of Turbulent Jet Ignition Engine……………………………………………………Zhou Lei,Liu Zongkuan,Li Xiao,et al(876)
Multifunctional Fluorescent Probe for the Detection of Hypochlorite and Microenvironment…………………………………………………………………………Chen Ligong,Hou Yuqing,Cui Siqian,et al(887)
Fretting Wear Characteristics of 690TT Alloy Tube Under Gross Slip Conditions…………………………………………………………………………………………………………Tan Wei,Tian Ce(895)
Preparation and Performance Analysis of a Solid Chlorine Dioxide Disinfectant…………………………………………………………………Guo Jintang,Song Qiaoqiao,Gao Tiantian,et al(903)
Effect of Cooling Water Flow Rate on the Thermal Performance of a Three-Phase Closed Thermosyphon with an Upward-Moving Evaporation Section…………………………………………………………Jiang Feng,Li Ruijia,Qi Guopeng,et al(909)
Alkali Modification of Biochar and Attapulgite for the Removal of Phosphorus from Water………………………………………………………………………Huang Renliang,Long Yuxuan,XiaoYao,et al(919)
Effect of Interlayer Regulation on the Electrochemical Properties of Layered Double Hydroxides………………………………………………………………………Wang Yang,Zheng Fenghua,Pan Qianfeng,et al(927)
Formation Mechanism of Fold Defects and Their Effect on Fatigue Properties in Ultrasonic Impact Treatment Q355 Steel……………………………………………………………………………Liu Xiuguo,Liu Zixin,Wang Dongpo,et al(933)
Intensive Time-Triggered Ethernet Topology Optimization………………………………………………………………………………Wang Qing,Wu Chenbang,Chen Peng,et al(942)
Classification Algorithm for Chest X-Ray Diseases Based on Dynamic Convolution……………………………………………………………………………………Li Qiang,Zhao Qimeng,Guan Xin(953)
Influence of Vapor-Liquid Passage Structure on the Performance of an Ultra-Thin Heat Pipe………………………………………………………………………………Gan Yunhua,Xiong Tang,Luo Qiliang,et al(965)
Experimental Study of U-Shaped Steel-Concrete Composite Beam Joints Under Tension……………………………………………………………………Yan Renzhang,Huang Zhonghe,Yan Chunling,et al(973)
Bearing Capacity of a Formed-in-Place Pipe Liner Spanning a Circular Void………………………………………………………………………He Chunliang,Yan Xuefeng,Ma Baosong,et al(988)
Modeling,Simulation,and Experimental Verification of a Continuum Elastic Joint of Surgical Instruments Using a Trapezoidal Cutting Groove………………………………………………Wang Shuxin,Meng Xiaowei,Hu Zhenxuan(997)
Device and Method for Detecting Side Edge Wear of End Milling……………………………………………………………………………Tian Ying,Yang Liming,Gao Zhanxu,et al(1008)
Recognition of Remaining Thickness of Lamina Milling via a Surgical Robot Based on Vibration Signal Fusion………………………………………………………………………Xia Guangming,Wang Rui,Zhang Lina,et al(1016)
Medium- and Long-Term Power Load Forecasting Method Based on LTC-RNN Model…………………………………………………………………………Deng Bin,Zhang Nan,Wang Jiang,et al(1026)
Gas-Liquid Two-Phase Flow Measurement Based on Coriolis Flowmeters and PSO-SVM……………………………………………………………………………Sun Lijun,Liu Yue,Tong Jielin,et al(1034)
Design of a Permanent Magnet Motor with Tangential Magnetization Structure for Light Electric Vehicles…………………………………………………………………………Chen Xueyong,Wang Xiaoyuan,Gao Peng(1045)
A Speech Enhancement Method Based on a Parabolic Center-Microphone Preprocessing and Transfer Learning……………………………………………………………………………Zhang Tao,Wang Zeyu,Hu Mengxue,et al(1053)
Stability Analysis and Improvement of Frequency Cooperative Control Strategy for Island Microgrid Considering Time Delay………………………………………………………………………Li Zhijun,Zhang Moufa,Zhang Jia’an(1061)
Cortical Network Rhythm Modulation Based on the PID-Type Iterative Learning Control Algorithm………………………………………………………………………………Wang Jixuan,Deng Bin,Wang Jiang,et al(1071)
A Group Attention Residual Network for Image Reconstruction in Cone-Beam XLCT………………………………………………………………………Zhou Zhongxing,Guo Siqi,Jia Mengyu,et al(1082)
Surface Acoustic Wave Resonator Based on Lithium Tantalate Thin Film Substrates………………………………………………………………………Yang Qingrui,Wang Zhichao,Song Xueyi,et al(1093)
Obtaining Tongue Surface Point Clouds with Grating Projection Mixed Real/Pseudo Binocular Model………………………………………………………………………Wang Peng,Dong Meihan,Sun Changku,et al(1101)
[REVIEW]Research Progress and Development Trends on Methods and Instruments of Spectral Mechanics: A Review……………………………………………………………………………Qiu Wei,Wang Xiaojie,Wang Zhiyong,et al(1109)
Type Synthesis and Optimization Design of the Linkage Differential Balance Mechanism……………………………………………………………………………Song Yimin,Yang Zhiyue,Yue Weiliang,et al(1120)
Light Field Super-Resolution Method Based on Combined Learning and Model Methods………………………………………………………………………Yang Jingyu,Zeng Xinyang,Lu Zhi,et al(1130)
Adaptive Chaotic Data Encryption Mechanism………………………………………………………………………………Zhang Lei,Pang Ke,Xu Jiangtao,et al(1139)
Effect of Heat Treatment on Transition Layer of Stainless Steel Flux Cored Wire Weld Overlay…………………………………………………………………………Zhang Zhi,Wang Jianshuo,Chen Jianguo,et al(1152)
Synthesis of Affinity Chromatography with Biomimetic Peptide Ligand and the Performance in Antibody Purification…………………………………………………………………………………………………Shi Qinghong,Jia Lixia(1159)
Adsorption and Removal of Phosphine by Copper-Based Modified Adsorbent………………………………………………………………………………………………Huang Guoqiang,Zhang Yu(1166)
Organic Phosphate Enrichment Mechanism and Optimization in Urban Sewage Treatment Plant………………………………………………………………………Zhang Yuting,Shang Wei,Khu Soon-Thiam,et al(1174)
SRM-CoRBF Multi-Fidelity Surrogate Model for Maintenance Ventilation of Long-Distance Water Transmission Pipeline……………………………………………………………………Wang Xiaoling,Ding Chaoyuan,Liu Changxin,et al(1182)
Stator Magnetic Field Analysis of a Spherical Induction Motor Using Soft Magnetic Composites……………………………………………………………………………………Li Bin,Wang Sisi,Hao Yasai,et al(1195)
Method of Edge Computing Node Deployment Planning Based on the Cyber-Power Hybrid Entropy………………………………………………………………………………………Ji Hao,Yang Ting,Liu Yuzhe,et al(1204)
Design of Low-Power Digital Filter for CMOS Temperature Sensors……………………………………………………………………………Zhao Yiqiang,Zhao Xinyu,He Jiaji,et al(1212)
Model Establishment and Performance Analysis of Thermally-Regenerative Ammonia-Based Flow Battery Stack…………………………………………………………………………Shu Gequn,Yang Shuang,Wang Weiguang,et al(1219)
Experimental Investigations on Combustion and Knock Characteristics of Port Fuel Injection Hydrogen Engine……………………………………………………………………………………Wei Haiqiao,Wang Nan,Li Wei,et al(1230)
Location Optimization of Urban Express Pickup Service Facilities Based on GAN……………………………………………………………………………………Hu Yike,Wen Wen,Liu Yaxin,et al(1237)
Risk of Infection in the Waiting Rooms in Children’s Hospitals Considering Population Density Distribution………………………………………………………………………………Liu Gang,Zhang Yichi,Qu Guanhua,et al(1249)
Hysteretic Behavior Analysis of Self-Centering Trapezoidal Corrugated Steel Plate Shear Wall with Beam-Only Connected Web Plates…………………………………………………………………………………………………Tan Zhilun,Zhao Qiuhong(1262)
Hysteretic Behavior of a Grid-Reinforced Corrugated Steel Plate Shear Wall…………………………………………………………………………………Dou Chao,Zhang Han,Yang Xiao,et al(1275)
Anti-Overturning and Force Characteristics of a Prefabricated Wind Turbine Foundation…………………………………………………………………………Zhang Puyang,Xu Yunlong,Ding Hongyan,et al(1289)
Investigation on Comprehensive Evaluation Index of Wavelet Threshold Denoising Based on Combination Weighting Method……………………………………………………………………………………………Xiong Chunbao,Pang Hongxing(1300)
Numerical Simulation of the Effect of Current on Wave Run-Up Around Composite Bucket Foundation………………………………………………………………………Yu Tongshun,Song Haoyang,Liu Meimei,et al(1309)
Influence of Construction Sequence and Lagging Distance on Ground Movements Induced by Two Overlapping Shield Tunnels……………………………………………………………………………………………………Fan Qi,Zhang Tianqi(1318)
Contents List of Journal of Tianjin University(Science and Technology) in 2022 …………………………………………………(Ⅴ)