Application of computer-assisted navigation in treating congenital maxillomandibular syngnathia:A case report

Li-Qin Lin,Shan-Shan Bai,Min Wei

Abstract

Key words: Craniofacial abnormalities; Mandibular diseases; Maxilla; Computer-assisted navigation; Case report

INTRODUCTION

Congenital craniofacial disorders represent approximately 20% of all birth defects.Syngnathia,a rare craniofacial disorder,is characterized by fusion of the hard and soft tissues of the jaw.The first case of syngnathia was reported by Burket in 1936 in a patient who had multiple diagnoses,including temporomandibular joint (TMJ)ankyloses,fusion of gums,associated facial hemiatrophy,and Horner syndrome[1].A significant complication in syngnathia patients is restricted mouth opening,which results in feeding,swallowing,and respiration problems.Early recognition and treatment are critical for normal growth and development.The aim of the case report is to introduce the application of computer-assisted navigation during syngnathia corrective surgery.

CASE PRESENTATION

Chief complaints

A 7-month-old girl with a clinical diagnosis of congenital maxillomandibular fusion was referred to the Department of Plastic and Reconstructive Surgery,Shanghai Ninth People’s Hospital,Shanghai Jiao Tong University School of Medicine for surgery.She was suffering from bilateral maxillomandibular syngnathia and inability to open mouth.

History of present illness

The patient was fed through a straw by his grandmother.

History of past illness

She had no past history of surgery and was not taking any medication.

她放下手头工作，认真地和我交谈，她告诉我，读书一定要读经典，要读有深刻思想的书。除此以外，有些书籍只需浏览一下就可以了；至于写作，首先要体验生活，比如保安工作就是体验生活的一种好途径，如果刻画人物，要写出人物内心世界的真情实感；在谈到职业规划时，鲍老师告诉我，先找到你人生的兴趣点，做你喜欢做的事，能够把职业和兴趣完美统一，这就是人生的成功。

Personal and family history

She was the first child of the parents (mother 28 years old,father 30 years old) and was bornviaan uncomplicated vaginal delivery.The parents did not have a history of consanguineous marriage.A similar symptom was not observed in other patient’s family members.

Physical examination upon admission

Physical examination revealed sever retardation - she was 73 cm tall and weight 5.5 kg - but did not reveal any congenital or systemic problems.She also presented with difficulty in feeding,breathing,sounding,and swallowing.The patient had difficulty in opening her mouth more than 1 mm in diameter.In her oral cavity,the upper and lower gums were completely fused and two deciduous teeth in the mandible were visible (Figure 1).Otherwise no abnormalities were noted.

Laboratory examinations

No abnormality was seen in routine blood tests,biochemical tests,or ECG.

Imaging examinations

A three-dimensional CT scan showed bilateral maxillomandibular fusion and very little oral cavity (Figure 2).These observations are consistent with TMJ ankyloses,a typical clinical feature in syngnathia patients.

Figure 1 Facial features and preoperative intraoral view of the patient.

FINAL DIAGNOSIS

Congenital maxillomandibular syngnathia.

TREATMENT

The purpose of the surgery was to separate the fused mandible and maxilla to open the mouth,which would solve the patient’s feeding issues.The patient underwent a prophylactic tracheostomy to prevent obstruction of airway during surgery 7 d in advance.Then,we prepared for computer-assisted navigation.Three-dimensional CT data were saved in the Dicom (digital imaging and communications in medicine)format and were imported into Mimics 10.0 software (Materialise,Leuven,Belgium)and the iPlan software of the VectorVision2 navigation system (BrainLAB,Feldkirchen,Germany).The anatomical landmarks were measured and analyzed on the basis of three-dimensional images.We chose the line from preauricular to marginal mandibular as the incision site.Operation simulations were performed to affirm the position of osteotomy line and the level of mandibular opening and its fixed position.The patient underwent general anaesthesia and the skin was sterilized.A navigation bracket was installed to the patient’s head first,and then face scanning by a laser scanner was performed for surface registration.The surgical instrument was registered at last.Registration accuracy (0.8 mm) was verified using the navigation pointer.The tip position and orientation of the probe were viewed continuously on screen (Figure 3).The oral space was exposed by retractors,the skin and subcutaneous tissue of incision were cut open,and the bilateral jaw lateral surface was exposed by blunt separation.It was easy to detect and isolate the mandible using the navigation system.Real-time position was verified by the navigation probe to avoid damaging important nerves,vessels,and dental germs.After the mandible was sawed off,silicone was fixed on the wound surface to prevent refusion of bone.Negative pressure drainage was put in the bilateral mandibles prior to suturing the incision.Perioperative bleeding was 100 mL.The patient was admitted to SICU after surgery.

OUTCOME AND FOLLOW-UP

Immediately following surgery,the patient had difficulty swallowing,so we used a nasogastric tube for feeding.The patient was discharged from the hospital one week later and was instructed to perform mouth opening and swallowing exercises.Followup three-dimensional CT scans of the face confirmed separation and bony healing.After six months,there was no recurrence.After eight months,the patient was 91 cm in height,weighed 11 kg,and could pronounce several single words; thus,we concluded that the surgery was successful.

Figure 2 Three-dimensional computed tomography images demonstrating bony fusion of bilateral maxillaries to the mandibles.

DISCUSSION

Syngnathia is a rare human congenital condition.It involves connection between soft tissues or fusion between bony tissues and varies in severity from single mucosal bands (synechiae) to complete bone fusion (synotosis)[2].Syngnathia is often accompanied by additional congenital defects,such as microglossia,micrognathia,and TMJ abnormalities.There are approximately 60 cases of congenital bony syngnathia reported in the literature[3],which reveal a high degree of variability in the location and extent of jaw fusion,and indicate that bony syngnathia may be isolated or syndromic.It is estimated that only 18% of cases are associated with known syndromes,such as aglossia-adactylia syndrome or hemifacial microsomia[4].In the reported cases,women commonly display an isolated form of syngnathia,whereas men display a more complex pattern of disease.Syngnathia is usually detected immediately after birth because the baby is not able to open the mouth to feed normally.Notably,patients presenting with complete bilateral synostosis of the upper and lower jaw represent the least common and most severe form of syngnathia.

The etiology and pathogenesis of syngnathis remain unknown,and it is an extremely rare condition involving abnormal development of the splanchnocranium,which is the part of the skull that is derived from the branchial arches[2].Various etiologies have been proposed,including environmental insults,medications such as meclizine,persistence of the buccopharyngeal membrane,and amniotic constriction bands[5,6].Villanueva-García and colleagues have suggested the possibility of an autosomal recessive occurrence[7].Moreover,a recent molecular genetics study showed that theFoxc1andFgf8genes play a role in regulating mammalian jaw patterning and mutations in these genes may underlie the pathogenesis of syngnathia[4].However,given that our patient had no other congenital abnormalities and there was no significant family history,a genetic or syndromic cause is unlikely.

Surgical division of the fusion must be carried out as soon as possible,which is necessary for normal feeding,removing airway obstruction,and allowing normal mandibular growth.Delay in surgical treatment increases the possibility of TMJ ankylosis,which leads to a lack of mandibular growth and facial deformities.The main goal of the surgery described in this care report was to release syngnathia and prevent recurrence.New management techniques,such as distraction,have been reported in congenital maxillomandicular[8].Since most syngnathia patients are infants,major surgical challenges are intraoperative blood loss and damage to nerves and dental germs.Another challenge stems from the lack of comprehensive guidelines to ensure patient safety during this type of surgery.

In the present case,we applied computer-assisted navigation to instruct our surgical approach.Computer navigation has emerged as an essential technology for guiding and verifying operations,such as reconstruction of mandible or orbital bone,orthognathia,and many other of craniofacial surgeries[9,10].We can understand the correlations among surgical devices,incisions,and peripheral anatomic sites in realtime easilyviacomputer navigation,and also can check the distance between the operation positions to the position designed preoperatively.With the precise guidance of computer navigation,our operative time was minimized by at least one hour.Moreover,the patients’ blood vessels,nerves,and tooth germs were all well protected and perioperative bleeding was minimized.

Figure 3 Screenshot of the navigation system.

CONCLUSION

We have demonstrated a novel approach to treating complex zygomaticomandibular syngnathia.Distraction techniques,like the one used here,should prove useful in addressing other craniofacial malformations.To our knowledge,this is the only syngnathia case in the literature treated using distraction techniques.In the future,our approach could be optimized to manage and prevention recurrence in other syngnathia patients.

ACKNOWLEDGEMENTS

The authors would like to thank the research staff and clinical personnel of the Shanghai 9thPeople’s Hospital for their outstanding performance and patient care.