Development and bioequivalence study of potassium chloride extended release tablets✩

Thu Van Le Thi,Nghiem Le Quan,Hau Le

University of Medicine and Pharmacy at Ho Chi Minh city,41 Dinh Tien Hoang Street,District 1,Ho Chi Minh City 700000,Viet Nam

Keywords:Potassium chloride Ethyl cellulose Hydroxypropyl methyl cellulose Extended release tablet Cumulative urinary excretion Urinary excretion rate

ABSTRACT The purposes of this study are to prepare the generic extended release tablet of potassium chloride(PC)600mg and to compare the absorption of potassium ion from the experimental tablets to that of Kaleorid®LP 600mg(Leo Pharmaceutical Products,Denmark).Carnauba wax was used as retardant in the matrix core tablets.The core tablets were coated with blends of ethyl cellulose(EC)and hydroxypropyl methyl cellulose(HPMC)to modulate the drug release.Results of a selective two-level,three-factor experiment design revealed that a blend of 41.75%of EC and 58.25%of HPMC at 4.5%weight gained could produce the coated tablets having dissolution profiles similar to those of Kaleorid®.A two-treatment,two-period,two-sequence crossover bioequivalence study was carried out on 24 healthy volunteers to compare the absorption of potassium ion from experimental tablets to that from Kaleorid®.The potassium ion in the urine was measured by a selective electrode of the ADVIA 1650 system(Bayer)and used to calculate cumulative urinary excretion and urinary excretion rate.Results of 90 percent confidence interval analysis showed that the limits for natural log-transformed cumulative urinary potassium excretion(Ln Ae0-24)of test product were in the range of 3.73–3.79mEq,corresponding to 99.08%–100.92%of Kaleorid®,respectively,and the limits for natural log-transformed maximal potassium excretion rate(Rmax)of test product were in the range of 1.72–1.82mEq/h,corresponding to 97.34%–102.66%of reference product,respectively.Both of them fell within the bioequivalence interval(80%–125%)of reference product,proving that experimental product is bioequivalent to Kaleorid®.

1. Introduction

Potassium is essential for a number of physiological processes including nerve transmission,muscle contraction and renal function.Potassium also plays a key role in the genesis and correction of imbalances of acid–base metabolism[1].Potassium supplements are indicated for the treatment of patients with potassium depletion(hypokalemia)or prevention of hy-pokalemia in patients who would be at particular risk if hypokalemia were to develop(e.g.,patients receiving digitalis therapy or patients with significant cardiac arrhythmias).The depletion of this ion usually develops slowly in many cases,and the patients have to take the medicine in a long therapy period.Hence,extended release(ER)oral potassium supplements with a low incidence of gastrointestinal disturbance have found widely accepted[2].Moreover,potassium chloride(PC)has been known for its gastrointestinal complication risks such as ulceration,hemorrhage,obstruction and perforation,and can even lead to necrosis and subsequent scarring.The ER dosage form seems to be the ideal one because of reduced possibility of a high local concentration of PC near the gastrointestinal mucosa[3].ER dosage forms of PC have been developed in matrix structure or coated dosage forms.

Cellulosic polymer most often used for controlled release is ethyl cellulose(EC)due to its good film forming properties.EC is a water-insoluble polymer generally regarded as non-toxic and non-allergenic.It is stable under physiological as well as during normal storage conditions.Due to the low permeability of pure EC,polymer blends of EC and water-soluble polymers are often used as coatings[4].Hydroxypropyl methyl cellulose(HPMC)is the most commonly used water-soluble polymer,and the release mechanism from pellets or tablets coated with EC:HPMC films with different polymer ratios hasbeen extensively studied.EC:HPMC coatings are for instance used in osmotic controlled drug delivery systems[5].

Plasma potassium concentration is controlled by homeostatic mechanisms,thereby making it inaccurate to determine bioavailability by measuring blood levels.In order to determine the bioavailability of potassium preparations,some investigators have measured urinary potassium concentration[6].This methodology is reasonable,since the major route of elimination for potassium is urinary excretion.Moreover,under steady state conditions the amount of potassium absorbed from the gastrointestinal tract is equal to the amount excreted in the urine.To achieve successfully these goals, it is necessary to control the diet and physical activity of the subjects.They must receive menus of known potassium and sodium content and abstain from exercises that may cause excessive perspiration and thus electrolyte losses[7].

Potassium is an intracellular cation and serum potassium level was maintained within a relatively narrow range,an accurate determination of bioavailability using potassium in plasma or serum is difficult[8].Urinary potassium measurements were used in this study to estimate bioequivalence of products.

The objectives of present study were to develop a generic ER preparation containing 600mg of PC and to compare the rate and extent of absorption of the potassium ion from experimental product with those of marketed product(Kaleorid®LP 600mg,Leo Pharmaceutical Products,Denmark).

2. Materials and methods

2.1. Materials

Potassium chloride was supplied from the Mekophar(Viet Nam);ethyl cellulose was kindly offered from Colorcon(Viet Nam).Carnauba wax(KahlWax,Germany)and stearyl alcohol(India)were purchased.All materials complied with the specification of pharmacopoeia or analytical grade.Kaleorid®LP(batch No.DA 8417,Leo Pharmaceutical Products,Denmark)was used as reference product to compare dissolution profiles and absorption in bioequivalence study.

2.2. Preparation of extended release tablets

Due to high solubility of PC in water,the ER tablets were designed in combination of matrix structure core and retard coating.Either stearyl alcohol or carnauba wax was used as retardant for the matrix.Tablets were prepared by direct compression process:PC was mixed with either stearyl alcohol or carnauba wax in a cubic mixer for 30min.The mixture then was heated in an oven for 1h at 100oC and passed through 1mm sieve.The lubricant was added to the granules and the final mixture was mixed again for 5min in a cubic mixer.The oblong-shaped tablets were compressed in the rotary tableting machine.The average weight of tablets was in the range of 630–655mg depending on the compositions of the tablets as could be seen in Table 1.The hardness of the tablets was maintained in the range of 180–200 Newtons.

The tablets were applied a subcoating of HPMC at 5%of weight before functional coating to enhance the adhesion of the functional coating.Polymer blends of EC and HPMC at various ratios were used as coatings to control the release of PC from the tablet.PEG 6000 was used as plasticizer.A selective two-level,three-factor experiment design(23factorial design)was adopted to study the dissolution profiles of drug from coated tablets.Experiment design for the optimization of percentage of EC in blends of EC was as follows:HPMC was taken as x1,percentage of PEG 6000 was taken as x2and weight gained of coating was taken as x3and tabulated in Table 2.The percentage of drug released at 1,2 and 6h were taken as dependent variables and tabulated in Table 3.

Table2–Independent variables in two-level,three-factor experiment design for coating of PC tablets.

Table3–Dependent variables in two-level,three-factor experiment design for coating of PC tablets.

2.3. In vitro release test

In vitro release tests were performed using method II as per BP 2003:900ml of distilled water at 37.0±0.5oC was used as medium and rotation of the paddles was maintained at 50rev/min.A sample of 10ml of the medium was withdrawn at 1,2,3,4,5 and 6h and the drug release was determined by the end point potentiometrical method in the following manner:add 25ml of water,5ml of a 25%v/v solution of glacial acetic acid and 0.1ml of a saturated solution of potassium sulfate and titrate with 0.01M silver nitrate VS determining the end point potentiometrically.Each ml of 0.01M silver nitrate VS is equivalent to 0.7455mg of PC.

The similar factor f2was used to compare the difference of dissolution profiles between the reference product and experimental formulation.The f2value greater than 50(50–100)represents equivalence of the two curves.

n is the number of time points;Rtis the mean percent reference drug dissolved at time t after initiation of the study;Ttis the mean percent test drug dissolved at time t after initiation of the study.

2.4. Determination of potassium chloride content

The content of PC in the tablets was determined by the end point potentiometrical method as follows.Remove the coating of 10 tablets,shake the core of 10 tablets with about 800ml of hot water then heat on a water bath for 30min.Cool,add sufficient water to produce 1000ml.Filter and dilute to give a concentration of about 0.6mg/ml.Take 10ml of solution and determine the content of PC in the same manner as described in drug release test.

2.5. Bioequivalence study

2.5.1. Subjects

Twenty four healthy male volunteers,aged 21–27y(22.75±1.49y)with body mass index in the range of 18.5–24.9(21.8±1.22),participated in this study.Female volunteers were excluded to avoid variability in physiological status peculiar to female like menstruation,lactation,etc.The subjects were examined and found to have no hepatic,renal,or cardiovascular disease or history of GI disorders.Routine laboratory determinations,ECGs,and physical examinations were conducted before admission to the study center.Informed consents were obtained after the study protocol was approved by the Ethics Committee of The Bioequivalence Evaluation Center in Ho Chi Minh City,Viet Nam.

2.5.2. Test product and reference product

Test product was experimental formulation coated with a blend of EC and HPMC at a suitable ratio and reference product was Kaleorid®LP(batch No.DA 8417,Leo Pharmaceutical Products,Denmark).

2.5.3. Study design

A two-treatment,two-period,two-sequence crossover study was carried out.To avoid salt and water loss through perspiration,the subjects stayed indoors in air-conditioned rooms under the supervision of the medical and nursing staff.Physical activities were restricted to avoid excessive sweating.A standardized diet,with known amounts of potassium and sodium,was supplied to the subjects at fixed times.The fluid intake was maintained at 3700ml per day to ensure an adequate rate of urine flow.Each subject administered 500ml of water at 7:00 a.m.and 200ml every hour afterwards up to 11:00 p.m.Extensive urine sampling for determination of urinary potassium excretion was performed,with creatinine clearance determined to ensure that urine collection has been adequate.

The first day was controlled day for baseline potassium urine.The samples of urine were divided into 10 collections over 24h for each subject.The volume of each urine collection was recorded to calculate the level of potassium excreted.After the aliquots were drawn for potassium assay,all remaining urine samples for each subject over a 24h period were pooled for urine creatinine determination.A blood sample was drawn at 2:00 p.m.for serum creatinine determination.

The second day was the dosing day.After a fasted overnight,the subjects were dosed 80mEq of potassium in a single dose of either the test or reference product at 7:00 a.m.with 500ml of water.The schedules of fluid intake,blood sample,and urine collection were similar to those of day 1.Stool tests were performed on all feces to determine any loss of blood.

The third day was postdosing day for calculating the cumulative potassium urinary excretion from 0–48h(Ae0-48).A washout period of 1 week was given before crossover to the next formulation.

2.5.4. Potassium determination

The potassium ion in the urine was measured by an ion selective electrode of the ADVIA 1650 system(Bayer).In this method,the urine sample was automatically determined by a potassium electrode.

2.5.5. Pharmacokinetic analysis

Cumulative potassium urinary excretion in 24h(Ae0-24)and in 48h(Ae0-48)was calculated after subtracting normal urine potassium excretion.The rate of potassium urine excretion(R)was calculated by dividing the amount of potassium excreted in the urine during a collection interval by the time elapsed.T was the time of each corresponding R.Statistical analysis(P=0.05)were performed for raw data and natural log-transformed data.The two one-sided t tests were used to determine 90 percent confidence intervals of 24h cumulative urinary excretion(Ae0-24)and maximal rate of urinary excretion data(Rmax).

3. Results and discussion

3.1. Formulation of the core tablets

Results of drug release tests,as illustrated in Fig.1A and Fig.1B,showed that both of retardants could prolong the release of PC from the tablets.However,the tablets containing stearyl alcohol(formulation F1–F4)were stuck to the upper punches after a short time of compress process,maybe due to the low melting point(50oC)of this excipient.

The tablets using carnauba wax as retardant could release PC at the percentage lower than those using stearyl alcohol at the same ratio of retardant.The sticking did not occur with tablets containing carnauba wax in compressing.As could be seen in Fig.1B,formulation F10 released over 80%of drug at 3h,indicating that the percentage of carnauba was about 4%could not retard the release of drug effectively.Among the remaining,formulation F9 was considered to be promising due to the small amount of carnauba wax used to retard the release,hence the smallest weight of the core tablets makes it easy to be swallowed.

Fig.1–Dissolution profiles of core formulations.A:with stearyl alcohol as retardants(F1–F4);B:with carnauba wax as retardants(F5–F10)(each point represents the mean±SD,n=6).

3.2. Coating of the potassium chloride tablets

The core tablets from F9 were chosen to coat with blends of EC and HPMC,in which HPMC was used as pore former of the coating.As per 23factorial design,8 coating formulations(FC)were conducted and the results of drug released were depicted in Table 4.

Table4–Drug released from PC tablets coated with various blends of EC and HPMC in coating formulations of factorial design(n=6 for formulation FC 1–FC 8 and n=12 for Kaleorid®).

Table5–Variables and corresponding P-values.

Polynomial equation for 23full factorial design is given in the following equation:

where y is dependent variable,b0is arithmetic mean response of eight formulations,and b1,b2,b3are estimated co-efficients for factor x1,x2,x3,respectively.

Significant terms at 95%confidence interval(P＜0.05)revealed that b2co-efficient attained the P-value greater than 0.05,as shown in Table 5,indicating that the variable b2(concentration of PEG 6000)did not affect the percentage released.Therefore the equations for drug released should be:

As seen in Table 4,formulation FC 8 contained x1and x3at high value,hence the drug released at 1,2 and 6h were slower than those of Kaleorid®;therefore the value of x1and x3were changed backward in 4 additional trials using-2.75 and-0.5 for x1and x3,respectively.Concentration of PEG 6000 was kept at 20%with respect to polymer weight.

Drug released from 4 additional coating formulations were depicted in Table 6.As seen in Table 6,formulation FC 11 containing 41.75%EC in mixture of EC:HPMC(e.g.,41.75:58.25,equivalent to 1.67%and 2.33%of EC and HPMC,respectively,in coating solution of 4%polymer blend)and the weight gained of coating layer at 4.5%to core weight could produce the coated tablet possessed dissolution profile similar to that of Kaleorid®as could be seen in Fig.2,and the similarity factor was at 83.41.The coating solution was designed as follows:EC at 1.67%;HPMC at 2.33%,PEG 6000 at 0.8%and solvent to make 100%.

Fig.2–Dissolution profiles of PC from tablets coated with EC:HPMC vs.those from Kaleorid®(each point represents the mean±SD,n=12).

3.3. Bioequivalence study

3.3.1. The baseline urinary potassium excretion

The mean cumulative baseline urinary potassium excretions on the controlled day were36.61±9.81mEq and 37.02±10.06mEq in the group dosing test product and dosing reference product,respectively.As seen on Fig.3,the mean cumulative baseline potassium excretion profiles of both superimposed and statistical analysis showed no significant difference(P=0.143).

The rates of potassium excretions depicted in Fig.4,and expressed as units of mEq/h,were calculated by dividing the amount of potassium excreted in the urine during a collection interval by the time elapsed during the interval.Excretion rate data of this type was very variable but provide useful patterns to analyze the excretion kinetic.In Fig.4,it could be seen that the 0–24h urinary potassium excretion on the controlled day from the test and reference product virtually superimposed,indicating that the rates of potassium excretion were not different from each other at the specific time during the controlled day.

Table6–Drug released from PC tablets coated with blends of EC and HPMC in additional coating formulations of factorial design(n=12).

Fig.3–Baseline mean cumulative amount of potassium excreted in urine of volunteers on controlled day(each point represents the mean±SD,n=24).

Fig.4–Baseline mean urinary potassium excretion rates vs.the midpoint of the collection interval on controlled day(each point represents the mean±SD,n=24).

Fig.5–The mean baseline-adjusted 24h cumulative urine levels of potassium(each point represents the mean±SD,n=24).

Fig.6–Mean urinary potassium excretion rates vs.the midpoint of the collection interval for 24h after dosing(each point represents the mean±SD,n=24).

The similarity in the excretion patterns would result from the normal creatinine clearances of the subjects and the well designed menus.From the potassium urinary excretion profiles,some peaks could be seen at 5,9,and 13h from the starting of the first collection.The increasing of the urinary potassium excretion rates at these moments would be the effect of the meals because they were observed about 1–2h after taking the meals.

3.3.2. Pharmacokinetic parameters of the potassium excretion

The net effect of drug administration was calculated by subtracting the amount obtained on the drug dosing day to baseline excretion of potassium for subject specific and collection specific.As seen in Fig.5,the values of mean baseline-adjusted cumulative urinary potassium excretion of test product were lower than those of reference product at the specific times in the 4–16h interval.

The mean baseline-adjusted 24h cumulative urine levels were 43.52±10.19mEq for test product and 44.34±11.81mEq for reference product,corresponding to 54.40%and 55.43%recoveries from the dose of80mEq,respectively.The mean baseline-adjusted 48h cumulative urine levels were 55.42±16.79mEq for test product and 55.45±18.48mEq for reference product,corresponding to 69.27%and 69.31%recoveries from the dose of 80mEq,respectively.

The mean maximal rate of urinary potassium excretion was 5.56±1.57 mEq/h for the test product and 6.12±1.87mEq/h for the reference product.The mean time of maximum excretion of potassium was 3.79±2.19h for the test and 4.54±2.29h for the reference product.The excretion rates of potassium decreased gradually after 4h of administration,as shown in Fig.6.

3.3.3. Statistical analysis and bioequivalence evaluation

Statistical analysis(P=0.05)showed no significant differences for all raw data(e.g.,Ae0-24,P=0.810;Ae0-48,P=0.995;Rmax;P=0.246;Tmax,P=0.295)and natural log-transformed data(e.g.,Ln(Ae0-24),P=0.878;Ln(Rmax),P=0.223)of 24 subjects.

The 90 percent confidence interval was determined for each natural log-transformed data using the two one-sided t test.The limits for log-transformed cumulative urinary potassium excretion of test product were in the range of 3.73–3.79mEq,corresponding to 99.08%–100.92%of reference product,respectively.The limits for natural log-transformed maxi-mal potassium excretion rate of test product were in the range of 1.72–1.82mEq/h,corresponding to 97.34%–102.66%of reference product,respectively.Both of them fell within the bioequivalence interval(80%–125%)of reference product.

4. Conclusion

The results of drug release test in this study proved that combination of matrix structure(using carnauba wax)and coating technique(using blend of EC and HPMC)is effective in controlling the release of PC from experimental tablets and can prevent the dose dumping of the system.The blend of polymer in this case led to forming the diffusion pores during drug release test.

The bioequivalent study revealed that the time to reach the maximal rate of potassium excretion for test product was shorter than that of reference drug,however both of them reflected the extended release properties of these products.The results of statical analysis on pharmacokinetic parameters proved that the experimental product is bioequivalent to Kaleorid®LP 600mg(Leo Pharmaceutical Products,Denmark).

Conflicts of interest

The authors declare that there are no conflicts of interest.

Acknowledgments

Financial support for bioequivalence study from The Department of Science and Technology(grant number 209/HDSKHCN)of Hochi Minhcity(DOST)is gratefully acknowledged.

REFERENCEs

[1]Ashok R,Srikumaran M,John DA,et al.Kinetics of potassium excretion following oral supplements:evidence of induced natriuresis.Pharm Res 1987;4:531–5.

[2]Pao CW,Min JT,Yaw BH,et al.In vitro and in vivo evaluation of potassium chloride sustained release formulation prepared with saturated polyglycolyed glycerides matrices.Int J Pharm 2002;243:119–24.

[3]Pao CW,Yaw BH,Jui SC,et al.Design and evaluation of sustained release microspheres of potassium chloride prepared by Eudragit®.Eur J Pharm Sci 2003;19:115–22.

[4]Siepmann F,Siepmann J,Walther M,et al.Polymer blends for controlled release coatings.J Control Release 2008;125:1–15.

[5]Nasser N,Stephen WH.Assessment of polymer-polymer interactions in blends of HPMC and film forming polymers by modulated temperature differential scanning calorimetry.Pharm Res 2000;17:625–31.

[6]Sevda S,Yilmaz C,Turgay D,et al.Formulation,bioavailability and pharmacokinetics of sustained release potassium chloride tablets.Pharm Res 1991;8:1313–17.

[7]Charles JB,John DA,Wayne FR,et al.Bioavailability and pharmacokinetics of a new sustained-release potassium chloride tablet.Pharm Res 1987;4:409–11.

[8]Moller H,Ali SL,Steinbach D.Pharmaceutical and biological availability of sustained release preparations of potassium chloride.Int J Pharm 1987;7:157–67.