Fengyun Meteorological Satellite Products for Earth System Science Applications

Di XIAN, Peng ZHANG, Ling GAO, Ruijing SUN, Haizhen ZHANG, and Xu JIA

National Satellite Meteorological Center, China Meteorological Administration, Beijing 100081, China

ABSTRACT Following the progress of satellite data assimilation in the 1990s, the combination of meteorological satellites and numerical models has changed the way scientists understand the earth.With the evolution of numerical weather prediction models and earth system models, meteorological satellites will play a more important role in earth sciences in the future.As part of the space-based infrastructure, the Fengyun (FY) meteorological satellites have contributed to earth science sustainability studies through an open data policy and stable data quality since the first launch of the FY-1A satellite in 1988.The capability of earth system monitoring was greatly enhanced after the second-generation polar orbiting FY-3 satellites and geostationary orbiting FY-4 satellites were developed.Meanwhile, the quality of the products generated from the FY-3 and FY-4 satellites is comparable to the well-known MODIS products.FY satellite data has been utilized broadly in weather forecasting, climate and climate change investigations, environmental disaster monitoring, etc.This article reviews the instruments mounted on the FY satellites.Sensor-dependent level 1 products (radiance data) and inversion algorithm-dependent level 2 products (geophysical parameters) are introduced.As an example, some typical geophysical parameters, such as wildfires, lightning, vegetation indices, aerosol products, soil moisture, and precipitation estimation have been demonstrated and validated by in-situ observations and other well-known satellite products.To help users access the FY products, a set of data sharing systems has been developed and operated.The newly developed data sharing system based on cloud technology has been illustrated to improve the efficiency of data delivery.

Key words: Fengyun meteorological satellite, sensor-dependent level 1 product, inversion algorithm-dependent level 2 product, product validation

(to be continued)

(Continued)

1.Introduction

Humans have a sixty-year history of observing Earth from space beginning after the launch of the first meteorological satellite, Television Infrared Observation Satellite(TIROS), in 1960.Since then, meteorological satellites have changed the way scientists understand the earth.For example, with direct satellite data assimilation, the European Centre for Medium-Range Weather Forecasts(ECMWF) has already input hundreds of satellite observations into its numerical prediction model (Florence et al.,2018).However, the climate depends not only on atmospheric processes, but also on physical, chemical, and biological processes involving other components of the earth system.Satellites have also played an important role in advancing observation of these other components of the earth system.

The Chinese meteorological satellite series Fengyun(FY), together with the National Oceanic and Atmospheric Administration (NOAA) series in the U.S.A.and the polar orbiting meteorological satellite (METOP) series in Europe,has become a main pillar used to construct Earth’s operational observation system.Since the first satellite (FY-1A)was successfully launched in 1988, four series have been developed, and seventeen additional satellites have been launched.The second-generation polar orbital mission [also called Low Earth Orbit (LEO)] FY-3 and second-generation geostationary orbital mission [also called Geosynchronous Equatorial Orbit (GEO)] FY-4A series have output stable data with remarkable quality (Yang et al., 2018;Zhang et al., 2019a, 2020a).

At present, seven satellites operate in orbit, including three FY-2 satellites, three FY-3 satellites, and one FY-4 satellite.FY-2 is the first-generation geostationary orbital satellite from China.Eight FY-2 satellites have been successfully launched.FY-2H, FY-2G, and FY-2F are still operating at 79°E, 99.5°E, and 112°E above the equator, respectively.FY-4 is the second-generation geostationary orbital satellite from China, which has successfully launched the first satellite of this series in the year of 2017.FY-4A has advanced earth observation capabilities and provides a better temporal resolution than the FY-2 series satellites (Yang et al., 2017; Min et al., 2017).Compared with the first-generation polar orbital satellites in the FY-1 series, the new generation polar orbital satellite FY-3 series expands the single onboard instrument to include more than 10 instruments.FY-3A and FY-3B have 11 instruments onboard, FY-3C has 12 instruments onboard, and FY-3D has 10 instruments onboard.The FY-3 series provides higher resolution images with more spectral coverage from the ultraviolet, visible,infrared, to microwave bands (Xu et al., 2010; Yang et al.,2012).Based on space-ground architecture, the National Satellite Meteorological Center (NSMC) has developed a comprehensive data service system that has been available to the public since 2005 (Chen et al., 2008).After more than 30 years of development since the first FY satellite was launched, the usage of FY satellite data has dramatically increased, not only in the meteorological community but also in remote sensing applications and other benefitting fields.With the promotion of open access to the FY satellite data, many new potential applications have been emphasized.After over three decades of development, FY satellites have recorded and com-plied extremely valuable information over a long period.These long-term datasets are especially useful in meteorological analysis, climate change monitoring, environment change detection, earth surface observation, and other related fields.

2.Instruments and sensor-depended level 1 data

Different types of instruments were loaded onto the FY satellites to detect geophysical parameters from different layers of the earth.Four main categories of instruments have been developed and operated on the FY satellites: optical imaging instruments, microwave instruments, IR sounding instruments, and space-weather instruments.Approximately ten terabytes of raw remote sensing data are received by the ground segment and processed into hundreds of level 1,level 2 and level 3 data products by the data processing center in NSMC.Level 1 data includes sensor-dependent radiance data, which is the fundamental data used to generate other higher-level products (Xian et al., 2012).Level 1 data is generated from raw data after navigation, calibration, and reorganization.Level 2 products are retrieved from level 1 data to show the geophysical status of the land surface,water surface, atmosphere, and space around the earth.Level 3 products are defined as the spatial and temporal sampling data in view of climate averaged grades from level 2 data products.

2.1.Visible and infrared optical instruments

Optical instruments are the classical payloads mounted on both FY LEO satellites and FY GEO satellites, which have been operational for over 30 years.The performance of these instruments has gradually improved.A visible and infrared radiometer (VIRR) was installed on the FY satellite for series FY-1A to FY-3C but was later replaced by a higher-performance optical instrument, referred to as the medium resolution spectral imager (MERSI).The VIRR of the FY-1 series, also referred to as the multichannel visible infrared scanning radiometer (MVISR), had 5—10 channels ranging from 0.43 to 12.5 μm (FY-1A and FY-1B had 5 channels, FY-1C and FY-1D had 10 channels) with maximum 1.1 km spatial resolution.The VIRR on the FY-3 series continued to use nearly the same configuration as the VIRR on the FY-1D series.Meanwhile, a new optical instrument,MERSI, was tested on the FY-3 series.MERSI enhanced the spectral and spatial resolution to a maximum resolution of 250 m with more than 20 channels [MERSI on FY-3A,FY-3B, and FY-3C had 20 channels and MERSI-2 on FY-3D had 25 channels (0.413-12 μm)].Level 1 data from the FY-1C and FY-1D series was archived in two formats: High Resolution Picture Transmission (HRPT) and Delayed Picture Transmission (DPT).HRPT data was received and processed in real time by ground segmentation when the satellite flew over the ground station.DPT data was temporarily stored on the satellite’s local storage and transmitted when the satellite passed the ground station.Therefore, DPT data were stored for a whole orbit, and HRPT data were stored for part of an orbit.At present, the VIRR and MERSI instruments on the FY-3B satellite are on a morning orbit taking operational global optical observations.The VIRR on FY-3C and the MERSI-2 on FY-3D operate on an afternoon orbit.

For geostationary orbitals, the FY-2 and FY-4 satellites played an important role in monitoring the Asia-Pacific and Indian Ocean areas.The visible and infrared spin scan radiometer (VISSR) is a stable instrument that has generated continuous full-disk earth observation data from the FY-2C satellite successfully since operation began in 2005.At present, the VISSR instrument on the FY-2F/G/H series and the Advanced Geosynchronous Radiation Imager(AGRI) on the FY-4A satellite are still operational for geostationary orbitals.

Available visible and infrared optical instrument data from FY satellites is listed in Table 1.

2.2.Microwave instruments

Three kinds of microwave instruments have been installed on the FY-3 satellites since 2008: microwave radiation imagers (MWRIs), microwave thermometers(MWTSs), and microwave hygrometers (MWHSs).Level 1 data was named and archived in two parts: the ascending part and the descending part.Five microwave instruments remain, including MWRI on FY-3D, MWTS-2 on FY-3D,MWHS on FY-3B, and MWHS-2 on FY-3C/D.FY-3B started its secondary operation in July 2020.

Available microwave instrument data from FY satellites is listed in Table 2.

2.3.Infrared (IR) sounding instruments

Infrared (IR) sounding technology was used on the FY-3 and FY-4 satellites targeted at detecting earth-atmosphere systems at a hyperspectral resolution.An infrared atmospheric sounder (IRAS) was installed on FY-3A, FY-3B,and FY-3D.Its successor instrument, the infrared hyperspectral atmospheric sounder (HIRAS), was installed on the FY-3D satellite, which used the world’s most advanced Fourier interference monitoring technology.The world’s first infrared sounding instrument in geostationary orbit was the geostationary interferometric infrared sounder (GIIRS),which was installed on the FY-4A satellite.Three sounding instruments are still operational, two in polar orbit (IRAS on FY-3B and HIRAS on FY-3D) and one in geostationary orbit (GIIRS on FY-4A).

Available IR sounding instrument data from FY satellites is listed in Table 3.

3.Earth observation products overview

With multiple sensors on the FY satellites, approximately 90 kinds of remote sensing products have been generated in the NSMC.The objectives of these products include atmospheric, oceanic, land surface, ecologic, cryospheric,cloud, and radiation monitoring.Tables 4-1 to 4-4 show the

Table 1.Visible and infrared optical imaging instrument data.

Note: (O) means the instruments are operational, (S) means the instruments have been shut down.temporal and spatial specifications and formats of the FY products.Most of these products are operationally processed and are free to download.Some products are still under research and development.

Table 2.Microwave instrument data.

Table 3.IR sounding instruments.

4.Typical geophysical products and their validation

Quantitative remote sensing product validation is cru-cial to successful utilization of the products.The quality of the products dictates their ability to observe the real parameters of the earth.Every product can be validated in different ways, including by artificial identification, cross validation with similar satellite instruments, ground-based observations, or model output (Wu et al., 2019).Operational products, such as the fire or hotspot detection, lightning,vegetation indexes, aerosols, and soil moisture products of the FY satellites, have been evaluated using different evaluation methods.Below, example cases show the results of the FY satellite products used for environmental research.

Table 4-1.FY-1 product list.

Table 4-2.FY-2 product list.

4.1.Wildfire monitoring product

Forests and grasslands are very important resources in the environment.Based on the Chinese environmental resource survey, the forest coverage rate is only 16.55%,which is lower than the global average level by more than 10.48%.The grassland coverage rate is 41.7%, and the per capita occupation rate is only half of the world’s average.Wildfire detection represents an important challenge to environmental protection.Since the 1980s, researchers have used metrological satellites to monitor wildfires (Matson et al.,1984).Wildfire images from satellites were first used to combat forest fires that occurred in the Greater Khingan Range,Heilongjiang Province, in 1987 (Liu et al., 2004; Li et al.,2017.Since then, wildfire detection has become an important product of meteorological satellites.Both polar and geostationary orbital FY meteorological satellites have been used in wildfire monitoring.The VIRR and MERSI instruments onboard the FY-1 and FY-3 satellites had special bands forwildfire detection.A newer wildfire identification algorithm that utilized the infrared, mid-infrared and far-infrared bands was used in the MERSI-2/FY-3D satellites (Fig.1).Moreover, the AGRI instrument on the FY-4A satellite can be used for wildfire detection and its fire product has a higher temporal resolution.

Table 4-3.FY-3 product list.

The forest fire product from MERSI-2 was validated by artificial identification.For example, a forest fire was detected by MERSI-2 in Hebi city in the Henan Province of China from 1300—1500 local time on 26 March 2019.With cooperation between the NSMC and local forest fire investigators, the location of the fire detected by MERSI-2 was validated.The validation results showed that the distance between the real fire location and the estimated point wasapproximately 0.0024° to 0.0049° longitude and 0.0008° to 0.0058° latitude (Zheng et al., 2020).The positioning accuracy of the MERSI-2 wildfire product reached 250 meters,which is better than the 1 km resolution of the previously used instrument.In addition, the differences between the neighboring fire pixels were separated in the MERSI-2/FY-3D wildfire product retrieved from the far-infrared band because there was no solar radiation interference.This feature can be used in the determination of the ignition point of the fire.

Table 4-4.FY-4 product list.

The specifications of the FY wildfire products are shown in Table 5.

4.2.Lightning detection product

Lightning data are new and originate from convective detection products because lightning is closely related to convective properties, such as the content of graupel and hail,the volume of updrafts, and the maximum vertical velocity.(Carey and Rutledge, 1996).Lightning imagery sensors on tropical rainfall measuring missions (TRMMs) can be used for tropical rainfall estimation (DeMaria et al., 2012; Xu et al., 2017).Space-based lightning data can provide valuable information for meteorological and climate research (Boccippio et al., 2000; Christian et al., 2003; Cecil et al., 2005,2014).The lightning mapping imager (LMI, Yang et al.,2017; Cao et al., 2012, 2018) on the FY-4A satellite, which is one of the first lightning detection sensors employed in geostationary orbit, provides event (level 1B product) and group and flash products (level 2 product).The detector size of LMI is 400 × 600 pixels.The observation area covers China from March to September and western Australia and the South Indian Ocean from September to March (Fig.2).

Event signals are the fundamental lightning cell detec-ted by the FY-4 LMI.Event signals are detected by the realtime event processor of the FY-4 LMI by background subtraction, threshold comparison, and pixels extraction of radiation values exceeding thresholds.With an event-groupflash tree structure, based on a clustering algorithm, cluster events are grouped into the products of group and flash.One-minute LMI event and group products are generated in NetCDF format (Fig.3).A historical and near-real-time product can be downloaded from the FY satellite data center (http://data.nsmc.org.cn).A visualized product can be found on the Fengyun Satellite Weather Platform(SWAP2.0, http://rsapp.nsmc.org.cn/geofy/en) (Xian et al.,2020a).

Fig.1.Wildfire detection in the western part of the U.S.A.with the FY-3D MERSI-2 satellite on 12 September 2020.

Table 5.Wildfire products from FY meteorological satellites.

Fig.2.FY-4A LMI coverage area.

The FY-4A lightning product was validated based on ground observations.Compared with the ground lightning imager, the total frequency of FY-4A satellite-captured lightning events was approximately ten times that of the ground observations due to the different observation methods.Figure 4 shows that the trends of lightning statistics were similar to those captured by two other types of detectors (Ren et al., 2020).However, in some situations, such as T1 and T3,the figure shows relatively high values for the ground-based observations.The T2 event shows a trend opposite to those of T1 and T3.

The specifications of the FY lightning products are shown in Table 6.

4.3.Vegetation monitoring product

Changes in vegetation on the land surface influence energy flows, climatic conditions, hydrologic settings, and geochemical cycles experienced on Earth.It is also a sensitive indicator of climate change and environmental change(Yang et al., 2017).Compared with traditional methods,remote sensing can quickly obtain surface information over a large area.With this information, the surface vegetationstatus can be calculated by direct or indirect inversion.Effective monitoring of vegetation changes in recent decades has been greatly supported by the multiple continuous developments made in remote sensing instruments and technolo-

gies, including the development of the FY satellite system.After the first FY satellite was launched in 1988, the vegetation product was generated from the FY-1 satellite observations with a 1 km × 4 km resolution for the area covering China.The normalized difference vegetation index (NDVI)product measured by the VIRR, MERSI, and MERSI-2 instruments of the FY-3D satellite uses the same algorithm as that of the advanced very high resolution radiometer (AVHRR)and moderate resolution imaging spectroradiometer(MODIS).Compared with AVHRR and MODIS, MERSI and MERSI-2 monitor more channels in total and have more solar bands, which can be used in more environmental applications.With the new MERSI-2 VI algorithm and high-quality cloud detection algorithm developed and operated by the NSMC (Fig.5), the MERSI-2 NDVI product shows a good correlation with the MODIS NDVI product (Fig.6).

Fig.3.Lightning event (a) and group (b) distributions [Reprinted from (Cao et al., 2018)].This figure shows a strong convection over south of Gansu province and Jiangxi province in China.Red pixels mean more lighting events and blue pixels mean less lightning events.

Fig.4.Comparison between LMI events and ground observations [Reprinted from (Ren et al., 2020)].This figure shows that the distribution of FY-4A LMI and ground observation were similar for June and it also shows different trends in T1, T2 and T3.

Table 6.Lightning products from FY meteorological satellites.

The specifications of the FY NDVI products are shown in Table 7.

4.4.Aerosol monitoring product

Aerosols are one of the most important key parameters used to evaluate air pollution.A number of satellites have the capability to detect aerosols because the detection of air pollution is considered to be one of the most important targets for developing remote sensing satellites.For optical instruments, aerosol products can be generated with visible band data and aerosol optical depth (AOD) retrieval algorithms.Aerosol products derived from MODIS have been widely used and validated since 2000.The MERSI,and VIRR instruments on the FY-3A satellite were the first Chinese-developed instruments to apply AOD retrieval(Zhang, et al., 2009; Zhang, et al., 2020b).The first AOD product started in March 2009.The dark dense vegetation(DDV) and ocean algorithm products were used to generate daily global aerosol products to evaluate air pollution.The spatial resolution of AOD is 1 km × 5 km.For the first three FY-3 satellites, the aerosol product was divided into two parts (land surface and sea surface) because different algorithms were used in the process flow of the AOD product.To help users better apply aerosol products in their work, these two products were combined into one dataset(Fig.7).The quality of FY-3 AOD products was validated using Aerosol Robotic Network (AERONET) observations and the datasets were compared with MODIS (Yang et al.,2020, Fig.8).The result shows that the FY-3 AOD performs well.Since the FY-4A satellite was launched, the AGRI instrument measured the corresponding channels for the dark target algorithm, which was applied in the generation of the AOD product (Zhang et al., 2019, Fig.9).These aerosol optical property products include the AOD product,Angstrom exponent, and fine mode fraction for each pixel.The spatial resolution of AOD is 4 km for full-disk coverage.

The specifications of the FY aerosol products are shown in Table 8.

4.5.Soil moisture product

Surface soil moisture is a key terrestrial water storage indicator that governs hydrological processes and influences weather and climate systems (Entekhabi et al., 2010;Du et al., 2012).Space-borne microwave radiometers characterized by a relatively low spatial resolution and a high temporal sampling enable the rapid assessment of soil moisture every 1—3 days (Bindlish et al., 2009).Among these satellite sensors, the MWRIs on the FY-3 series satellites have provided global measurements of surface wetness since 2008.The FY-3/MWRI instrument operates at five different frequencies, 10.65, 18.7, 23.8, 36.5, and 89 GHz, with dual polarization.The spatial resolution of the FY-3B/MWRI soil moisture product is 25 km (Table 9).The long-term and continuous operation of the MWRI instru-ments benefit a variety of applications, including effective crop yield assessment and drought risk mitigation (Sun et al., 2014).

Fig.5.FY-3D MERSI-2 global NDVI product for July 2020.

Fig.6.Comparison between the FY-3D satellite MERSI-2 product and the MODIS NDVI product [Reprinted from (Han et al., 2020)].

The MWRI soil moisture product algorithm was built based on the zero-order radiative transfer mode (Mo et al.,1982), where satellite-observed emissivity consists of contributions from vegetation, interactions between vegetation and the underlying soil surface, and the soil surface.For deriving soil moisture, the following steps are taken sequentially(Liu et al., 2013) to correct for vegetation and surface roughness: (a) estimate the physical temperature using the brightness temperature (Tb) at 37 GHz (Holmes et al., 2009); (b)calculate the vegetation transmissivity using vegetation water content estimated from an ancillary NDVI dataset (Jackson et al., 1999, 2010); and (c) obtain the soil moisture using a Qp-based inversion model (Shi et al., 2006).The Qp model is a parameterized soil surface emission model that has a similar accuracy as rigorous theoretical models (e.g.,the advanced integral equation model) while maintaining a simple form (Shi et al., 2006).For MWRI, the Qp-based inversion model minimizes the effects of surface roughness and derives the volumetric soil moisture (VSM) using both V- and H-polarized Tb observations in the X-band (Shi et al., 2006).

Table 7.NDVI products from FY meteorological satellites.

Fig.7.Global AOD distribution with the FY-3D MERSI-2 instrument [Reprinted from (Yang et al.,2019)].

Fig.8.Verification of AOD product derived from the MERSI-2/FY-3D satellite.[Reprinted from(Yang et al., 2019)].

Fig.9.AOD product from the AGRI/FY-4A satellite at 0400 UTC 21 June 2020.

The MWRI soil moisture product was validated using similar instrument observations.A comparison between the FY-3D/MWRI soil moisture product and the GCOMW1/AMSR2 soil moisture product was performed.The results demonstrated that the root mean square error was within 0.06 cmcmin the medium to low vegetation cover areas.

The comparison result between the MWRI and AMSR2soil moisture products is shown in Table 10.

Table 8.Aerosol products from FY meteorological satellites.

Table 9.MWRI soil moisture product from FY meteorological satellites.

4.6.Precipitation estimation product

Satellite precipitation estimations have significant value for severe weather forecasting and agricultural production.Compared with ground observations, satellite observations can monitor convection from space at higher resolution and greater spatial coverage, especially for mesoscale convective system (MCS).MCS events are a main source of heavy rainfall.Satellite images show important features of MCS events while they move, arrange, and evolve.Since the 1990s, the relationship between cloud top Tb of infrared channel images and rainfall has been revealed (Lu and Wu,1997; Fang and Qin, 2006; Min et al., 2020).From watervapor channel images, the ascending movement and water vapor environment in the middle and upper troposphere,which are favorable to the occurrence and development of rainstorm clouds, can be observed (Qin et al., 2005).With the development of satellite observation technology, Tb observation from visible, infrared, and microwave detection instruments on the FY-3 satellite can be used in cloud liquid water and multilayer cloud analysis (Wang et al., 2019;Yang et al., 2019).The precipitation estimation product was one of the most important products to both polar orbit and geostationary orbit FY satellites.Table 11 shows the precipitation estimation product list for FY satellites.

Table 10.Comparison result between the MWRI and AMSR2 soil moisture products.

Since 2005, FY-2 satellites can generate four kinds of products on precipitation estimation, which are in one-,three-, six-, and twenty-four-hour intervals, respectively.The FY-4A satellite has operational and higher frequency precipitation estimation products (Fig.10) within five minutes interval.Verification of the quantitative precipitation estimation product between FY-4A and Himawari-8 shows that the mean error is 0.11 mm and the hit rate is 99%.The global precipitation estimation product is generated from MWHS and MWRI on FY-3 satellites since 2009.

Table 11.Precipitation estimation product from FY meteorological satellites.

Fig.10.Precipitation estimation product from the AGRI/FY-4A satellite at 0700 UTC 19 October 2020.

5.Data delivery and access

Data services are very important for improving FY satellite applications.The NSMC has established a data service as of the end of the 20th century.This first-generation data service was mainly based on a broadcasting system and hard copies of a type library or disk array.A data service system on the Internet, also referred to as the Fengyun Satellite Data Center Web site (http://data.nsmc.org.cn), was built in 2005, which introduced an easy way for more users to obtain FY satellite data, especially users from outside the China Meteorological Administration (CMA) or users who do not have an antenna and data broadcasting system.With the rapid development of the FY satellite series, the number of data species and quantum analyses have rapidly increased.The third-generation data service system, which has integrated space and ground capabilities, was upgraded to fulfill more needs from users (Zhang et al., 2020a).Userscan download historical and near-real-time data and products with a quick search.FY meteorological satellite data have become very popular worldwide, especially in the Asia-Oceanic region and China’s Belt and Road area(Zhang et al., 2019; Xian et al., 2020b).Individuals from 115 countries have become users of the FY satellite data center (Fig.11).These data sources have been used in weather monitoring and forecasting, global ecology and environmental monitoring, and disaster mitigation in some countries (Xian et al., 2020b).Additional specifications, tips for downloading and deskhelp information can be found at NSMC website (http://data.nsmc.org.cn/PortalSite/Static-Content/DocumentDownload.aspx?TypeID=22¤tculture=en-US).

5.1.Web site

All level 1 data and products mentioned in this article can be found on the FY satellite data center Web site(http://data.nsmc.org.cn).Most data was generated in HDF5.0 or NetCDF format.Users need to register for an account before downloading data.Data can be added to the online data order.By submitting the order, users will receive data preparation notifications after the data has been prepared.Normally, a data order will be finished within 5 hours.An ftp address will be sent to the user by email or updates can be viewed on the Web site.

5.2.Data Download Toolkit

The NSMC released a Fengyun Satellite Data Download Toolkit in 2018.This toolkit provided a new way to help users find and obtain FY satellite data.By setting a download default folder, this software will start downloading the data automatically when the order is prepared.Furthermore, this toolkit provides a kind of data reservation mechanism.This introduced a whole new experience in obtaining satellite products by allowing the user to order the selected data or products in a customized area with temporal parameters at a maximum of three months.

5.3.Satellite Weather Application Platform 2.0 (SWAP 2.0)

SWAP 2.0 is an application platform that focuses on geostationary meteorological satellite data utilization, realizes a comprehensive display of the FY-4A and FY-2 series satellite data, provides interactive typhoon positioning/intensity estimations, and establishes a strong convective analysis system.SWAP 2.0 has the ability to display level 1 data, compose multiple channel data, play animation, render level 2 data, etc.SWAP 2.0 is available in two versions.The Webbased versions were released in three languages: Chinese,English, and Russian (http://rsapp.nsmc.org.cn/geofy).The stand-alone version can be installed on Windows 7 SPL or newer window platforms and has been released in two languages: Chinese and English.

5.4.Satellite Monitoring and Remote sensing Toolkit 2.0(SMART 2.0)

SMART 2.0 is a comprehensive application platform for ecological remote sensing, monitoring, and application using FY-3 satellite data.It offers special application tools for professionals engaged in the remote sensing of natural hazards and ecological environments.SMART 2.0 fills many great functions, such as uniform operation management, multisource data displaying, universal tools of image processing and remote sensing, thematic information deriving, geographical information system (GIS) overlaying, and thematic product generation and dissemination.

5.5.Mobile applications

The invention of smart mobile phones was a technology revolution that has changed people’s daily lives.To support applications on smart phones, several small applets andapplications were developed using data from the FY satellites.Two of these applets were developed based on the WeChat platform.The first applet is called the FY Global Browser.This applet shows daily real color composite images with 250 m resolution, which are generated from FY-3D MERSI-2 satellite data.The second applet is called the FY Now.Real-time RGB-composited images can be displayed in the WeChat application based on the user’s location.

Fig.11.Global user distribution of the FY satellite data service.

6.Summary

As a result of the development of the FY meteorological satellites, researchers in the environmental fields have been able to utilize stable, reliable, and accurate remote sensing products.Over the next five years, six additional FY meteorological satellites will be developed and launched, and the observation area will be expanded.Meanwhile, the observation interval and capabilities will also increase.These upgrades will improve wildfire, lightning, and aerosol monitoring product quality and increase the number of potential applications.

Many of these products have been generated to monitor environment-related parameters using the capabilities of the FY meteorological satellites.Many efforts have been made to improve the data quality, timeliness, spatial resolution, and acquisition during the processing of the FY meteorological satellite ground segment.Compared with the same types of products generated by other satellites, vegetation and aerosol products have shown good accuracy and reliability.The advantages of the FY satellites include a high temporal resolution and more band choices.The lightning products are unique and provide a new parameter for analyzing convention.Wildfire products have been tested and used to develop forest and environmental protection plans.In the future, more products, including greenhouse gas monitoring, water body environment detection, and land surface analysis products, such as soil moisture and land surface temperature, will be developed and shared with the public.

With the rapid development of the Internet and cloud technology, new technologies will be implemented to improve FY data access and utilization.A cloud-based data sharing platform has been designed and will be built over the next two years.Massive amounts of FY data and products will be archived in this system.Users can transplant and run their own algorithms in this system with a universal plug-in standard.A scientific computing platform based on cloud computing and AI technologies will be brought to users to improve the potential FY data applications.In conclusion, FY data will be obtained and utilized in a more simple and convenient manner in the future.

Acknowledgements.

This work was supported by the National Key Research and Development Program of China(2018YFB0504900, 2018YFB0504905).We thank the editor and reviewers for their constructive suggestions and comments.

Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source,provide a link to the Creative Commons license, and indicate if changes were made.