2020年总目次

2020年总目次

高纯铼及其化合物的制备与应用研究进展∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙张家润，刘智勇，刘志宏，李启厚(4): 273-279

高纯仲钨酸铵产品制备工艺现状及发展前景∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙但宁宁，李江涛(5): 363-268

L12型Al3(Yb, Zr)相结构的第一性原理计算和实验研究∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙陈卓，方华婵，祝昌军，朱佳敏(1): 1-10

不同温度下晶面衍射弹性常数的两相模型计算∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙许海峰，祝昌军，陈康华，刘力(2): 91-97

Ti2AlNb基合金高温氧化初期热力学分析∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙杨家俊，刘立斌，赵云，章立钢(2): 98-103

Ti-Al-Nb三元体系50Ti-Al-Nb的垂直截面∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙赵云，刘立斌，杨家俊，章立钢(4): 280-287

极端应变率下钨孔洞演化及其力学响应的分子动力学模拟∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙百晓丹，陈逊，马运柱，刘文胜，梁超平(4): 288-295

Ti(C0.7N0.3)对(Ti,W,Ta)C-Mo-Ni系金属陶瓷组织与性能的影响∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙蔺绍江，陈肖，熊惟皓(1): 11-15

低温轧制及时效热处理对Al-Zn-Mg铝合金显微组织与性能的影响∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙陈送义，刘强，陈康华，黄兰萍(1): 16-26

固溶时效处理对SLM成形CoCrWMo合金组织与性能的影响∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙班乐，黄嘉豪，毛卫东，吴苑标，肖志瑜(1): 27-34

TiN添加量对WC-TiC-TaC-8.0Co硬质合金组织与性能的影响∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙王雁洁，刘咏，杨新宇(1): 35-39

煅烧温度对共沉淀法制备热障涂层用LaMgAl11O19前驱粉末性能的影响∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙刘冬梅，李超(1): 40-44

Ti含量对Ti-MoSi2复合材料组织与性能的影响∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙郝亚楠，范景莲，陆琼，王圆圆(1): 45-50

粉磨方式对钢渣微粉特性的影响∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙段思宇，李溪，马卓慧，廖洪强，程芳琴(1): 51-57

原料中C/N原子比对TiCN基金属陶瓷组织结构和性能的影响∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙崔焱茗，张立，黄龙，刘涛，梁艳，吴厚平，熊湘君(1): 58-64

激光熔覆Fe-Mo-V-C合金涂层组织及摩擦磨损性能∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙张磊，陈小明，苏建灏，张凯，谌宽，赵坚(1): 65-71

SPS制备ODS铁基合金的显微组织与力学性能∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙段清龙，刘祖铭，黄立清，郭旸，苏鹏飞，陈仕奇(1): 72-78

保温时间对黄土基陶瓷膜支撑体性能的影响∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙李大川，同帜，黄开佩，王佳悦，周广瑞(1): 79-85

基于黏结理论的球磨机梯形衬板的设计∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙褚亮，董为民，龚梦(1): 86-90

流延制备有序排列石墨烯增韧氧化锆陶瓷的结构与力学性能∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙蔡伟金，李青，刘耀，刘绍军(2): 104-111

S275铁素体钢板窄间隙激光焊的缺陷形成机理及影响因素∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙章鸿(2): 112-117

HfB2-ZrB2-SiC改性C/C复合材料的制备及性能∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙向秋玲，汤振霄，彭可，易茂中(2): 118-124

2055铝锂合金热拉伸的显微组织与流变应力行为∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙刘宁，肖代红，刘文胜(2): 125-132

基于定向多孔SiC的浸渍−裂解法制备SiC陶瓷材料的结构与性能∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙黄玉娟，熊慧文，邹金住，周科朝，张斗(2): 133-139

粉体表面改性对氧化锆光固化成形的影响∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙李青，刘耀，蔡伟金，石原，刘绍军(2): 140-147

化学镀镍(SCF-Ni)短炭纤维增强铝基复合材料的显微组织与力学性能∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙蒋文婷，李国栋，杨娟，刘阳，于士杰(2): 148-156

ZrB2含量和烧结温度对ZrC-ZrB2复合材料组织与性能的影响∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙王圆圆，范景莲，陆琼，郝亚楠，高银(2): 157-163

高温刻蚀硼掺杂金刚石电极材料的形貌与电化学性能∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙刘婷，苗冬田，魏秋平，马莉(2): 164-170

新型浆料注射法制备C/C复合材料的显微组织及力学性能∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙胡姣，李国栋，张洋，韩前武，姜毅(2): 171-178

碳纳米管对泡沫铜/石蜡复合相变材料热性能的影响∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙包胜友，安俊杰，马莉，魏秋平，柏振海，周科朝(2): 179-184

高温高压柔性介质成形GH4169异形超细曲面的致密化行为∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙马丁，郎利辉，肖毅，孟凡迪，李世越(3): 185-190

无压烧结氮化硅陶瓷的致密化过程∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙刘文勇，李建斌，孙振飞，蒋强国(3): 191-196

(TiH2+TiB2)/AA7075复合粉末激光选区熔化成形的显微组织与力学性能∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙欧阳盛，刘允中，沈君剑，肖小军(3): 197-205

锆合金包壳管内壁SiC涂层的PECVD制备与性能∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙谭瑞轩，王洪磊，余金山，李怀林，刘艳红，樊哲琼，卢蕾文，周新贵(3): 206-212

微波热压优化分层微观结构BiSb2−xTe3合金的热电性能∙∙∙∙∙∙∙∙∙刘培海，冯波，胡晓明，李如松，张阳琳，樊希安(3): 213-220

B位Hf掺杂对0.94Bi0.5Na0.5TiO3-0.06BaTiO3陶瓷结构与性能的影响∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙彭聪斐，黄荣厦，黎家就，熊顺进，林华泰(3): 221-226

高氧铌粉的镁还原降氧工艺∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙刘芳，李庆奎，罗俊锋，徐国进，张巧霞(3): 227-233

超音速喷涂WC-10Co4Cr及WC-12Co涂层的抗海水气蚀性能∙∙∙∙∙∙∙∙∙∙∙伏利，刘伟，陈小明，赵坚，李育洛，张磊(3): 234-238

氧化铒对3D打印氧化锆陶瓷饰品性能的影响∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙王胜亮，李练，王明浪，何福坡，李艳辉，伍尚华(3): 239-244

熔盐电解高纯钛的结晶机理及形貌∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙冯啸，姜嫄嫄，马鑫，翁启钢，袁铁锤，周志辉(3): 245-250

激光选区熔化成形TiB2与SiC颗粒混杂增强铝基复合材料的显微组织与力学性能∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙沈君剑，刘允中，欧阳盛，洪旭潮，刘小辉(3): 251-259

Ni10Mo/CF复合材料的制备及析氢性能研究∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙蒲佳璇，曹军，魏秋平，尹登峰，马莉，周科朝(3): 260-266

激光熔覆FeCr和CoCr合金涂层的组织与性能∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙刘伟，伏利，陈小明，张磊，李育洛，张凯(3): 267-272

球磨时间对M2粉末冶金高速钢组织与力学性能的影响∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙杨军浩，刘如铁，熊翔，栾怀壮，郝彦荣，杨宝震，陈洁(4): 296-303

氮气烧结金属注射成形17-4PH不锈钢的组织与性能∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙王越，李瑞迪，袁铁锤(4): 304-311

Cr含量对NiCrMoCu多孔材料高温氧化行为的影响∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙邹浩然，李喜德，张绰，杨军胜，贺跃辉(4): 312-320

纳米SiC对Ti(C,N)基金属陶瓷微观组织与性能的影响∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙龚涤凡，李詠侠，杨海林，邹丹，刘艳军(4): 321-329

LaB6对Ti(C,N)基金属陶瓷致密化及组织与性能的影响∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙黄建华，张鹛媚，康希越，吝楠，颜焰，邱嵩，刘毅，贺跃辉(4): 330-337

镁铝尖晶石对95氧化铝陶瓷显微结构与力学性能的影响∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙方豪杰，刘秋宇，贺亦文，郭伟明，张晓云，朱林林，曾超，林华泰(4): 338-343

放电等离子烧结Ti-1Al-8V-5Fe合金的致密化机理∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙李文杰，曾凡浩，李磊，王紫微，刘红浩，彭奕瑞，古一(4): 344-351

TNZS基生物材料的体外组织相容性∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙赵倩(4): 352-357

喷射成形制备建筑用硅质岩/A356复合材料的组织与力学性能∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙李奎，张照方，马楠，李明(4): 358-362

速度对AuNi9/AuAg35Cu5载流摩擦磨损行为的影响∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙周雄，罗博，康潇，张雷(5): 369-374

纳米钨辅助氢气还原氧化钨制备超细钨粉∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙张勇，张国华(5): 375-380

碳含量对WC-TiC-Co合金组织与性能的影响∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙罗任，熊慧文，陈楠，李志友(5): 381-388

还原钨粉粒度特性的过程研究∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙陈杉杉(5): 389-395

黏结剂对铁基混合粉末性能的影响∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙苏凤戈，郑卓，陈陆水(5): 396-402

B含量对CrFeCoNiTi0.6高熵合金显微组织和性能的影响∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙姜越，李秀明，周广泰，朱柏祥(5): 403-409

启闭机活塞杆表面爆炸喷涂制备Al2O3涂层的显微组织与性能∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙伏利，陈小明，毛鹏展，刘伟，张磊，张凯，李育洛(5): 410-416

预混液成分对光固化成形氮化硅陶瓷力学性能的影响∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙刘耀，何宇，辛峰，王斌，占丽娜，文如泉，肖文福，刘绍军(5): 417-423

粉末冶金立方氮化硼聚晶材料的球磨混料工艺∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙谢辉，邓福铭，王浩，韩顺利，冯飞(5): 424-432

AlCl3·6H2O中Mg杂质的去除工艺∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙钞晓光，高桂梅，王宏宾，曹坤，戴崟，松丽涛，邹萍，王永旺(5): 433-439

矿用卡车离合器用锌钨合金增强铜基粉末冶金摩擦材料的摩擦磨损性能∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙谢茂青，王雷刚，彭鹏，杨国盛，张嘉浩(5): 440-448

电极感应气雾化法制备Y2O3增强Ti-6Al-4V复合粉末的性能∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙刘联平，陈仕奇(6): 449-457

SiC含量对内燃机用Ti-6Al-4V合金复合膜组织和摩擦性能的影响∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙王雪，于秀涛(6): 458-464

Inconel 718合金粉末粒形定量表征及其SLM成形工艺优化∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙许阳，张荣，肖志瑜(6): 465-474

油气管道37Mn5钢表面激光熔覆CoCrW涂层的组织及腐蚀性能∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙王荣健，梁金禄，黄小玉，石海信(6): 475-479

爆炸喷涂铁基非晶涂层的微观结构和纳米压痕行为∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙欧阳晟，储志强，唐求豪，解路(6): 480-485

放电等离子烧结无黏结相Ti(C,N)基金属陶瓷的组织与性能∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙卢赛君，康希越，张鹛媚，贺跃辉(6): 486-496

电子束选区熔化制备纯钼块体的组织与性能∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙李会霞，朱纪磊，谭彦妮，刘彬，陈睿，赵培，弋阳(6): 497-504

SPS工艺参数对ZrB2-MoSi2-SiC复合陶瓷组织与高温抗氧化性能的影响∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙张玉栋，李继文，王南南，潘昆明，张亮亮(6): 505-512

球磨时间对NbMoTaWVCr难熔高熵合金组织与性能的影响∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙彭海燕，康志新，李小珍，周莉，龙雁(6): 513-519

六钛酸钾晶须增强汽车干式离合器摩擦片的热衰退和振颤特性∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙谢茂青，王雷刚(6): 520-526

喷嘴入口倾斜角对干法造粒制备Si3N4颗粒雾化过程的影响∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙廖达海，方永振，周贱根，甘振华，方长福，吴南星(6): 527-537

铜基粉末冶金刹车材料支撑背板表面镀层对防渗碳性能的影响∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙曹文明，姚萍屏，周海滨，赵林，许良，肖叶龙(6): 538-544

Research progress on preparation and application of high-purity rhenium and its compounds∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ZHANG Jiarun, LIU Zhiyong, LIU Zhihong, LI Qihou(4): 273-279

Preparation technology status and development prospect of high purity ammonium paratungstate product∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙DAN Ningning, LI Jiangtao(5): 363-368

First-principles calculations study and experimental results of L12-structured Al3(Yb,Zr) precipitate∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙CHEN Zhuo, FANG Huachan, ZHU Changjun, ZHU Jiamin(1): 1-10

Two-phase model calculation of diffraction elastic constant of crystal plane at different temperature∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙XU Haifeng, ZHU Changjun, CHEN Kanghua, LIU Li(2): 91-97

Thermodynamic analysis of Ti2AlNb-based alloy in the initial stage of high temperature oxidation∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙YANG Jiajun, LIU Libin, ZHAO Yun, ZHANG Ligang(2): 98-103

Vertical section of 50Ti-Al-Nb in Ti-Al-Nb system∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ZHAO Yun, LIU Libin, YANG Jiajun, ZHANG Ligang(4): 280-287

Molecular dynamics simulation of void evolution and its mechanical response in single-crystal tungsten under extreme strain rate∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙BAI Xiaodan, CHEN Xun, MA Yunzhu, LIU Wensheng, LIANG Chaoping(4): 288-295

Effects of Ti(C0.7N0.3) addition on the microstructure and properties of (Ti,W,Ta)C-Mo-Ni cermets∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙LIN Shaojiang, CHEN Xiao, XIONG Weihao(1): 11-15

Effect of cryogenic rolling and aging heat treatment on microstructure and properties of Al-Zn-Mg aluminum alloy∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙CHEN Songyi, LIU Qiang, CHEN Kanghua, HUANG Lanping(1): 16-26

Effect of solution-aging treatment on the microstructure and properties of selective laser melted CoCrWMo alloys∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙BAN Le, HUANG Jiahao, MAO Weidong, WU Yuanbiao, XIAO Zhiyu(1): 27-34

Effect of TiN content on microstructure and properties of WC-TiC-TaC-8%Co cemented carbide∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙WANG Yanjie, LIU Yong, YANG Xinyu(1): 35-39

Effect of temperature of coprecipitation on properties of LMA precursors for thermal barrier coatings∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙LIU Dongmei, LI Chao(1): 40-44

Effect of Ti content on microstructure and properties of Ti-MoSi2composite material∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙HAO Yanan, FAN Jinglian, LU Qiong, WANG Yuanyuan(1): 45-50

Effect of grinding method on properties of steel slag powder∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙DUAN Siyu, LI Xi, MA Zhuohui, LIAO Hongqiang, CHENG Fangqin(1): 51-57

Effects of C/N atomic ratio in raw materials on the microstructure and properties of Ti(C,N)-based cermets∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙CUI Yanming, ZHANG Li, HUANG Long, LIU Tao, LIANG Yan, WU Houping, XIONG Xiangjun(1): 58-64

Microstructure and frictional wear performance of Fe-Mo-V-C alloy coating prepared by laser cladding∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ZHANG Lei, CHEN Xiaoming, SU Jianhao, ZHANG Kai, CHEN Kuan, ZHAO Jian(1): 65-71

Microstructure and mechanical properties of oxide dispersion strengthened Fe-based alloy prepared by spark plasma sintering∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙DUAN Qinglong, LIU Zuming, HUANG Liqing, GUO Yang, SU Pengfei, CHEN Shiqi(1): 72-78

Effect of holding time on properties of loess-based inorganic ceramic membrane supports∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙LI Dachuan, TONG Zhi, HUANG Kaipei, WANG Jiayue, ZHOU Guangrui(1): 79-85

Design of trapezoidal liner of ball mill based on bonding theory∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙CHU Liang, DONG Weimin, GONG Meng(1): 86-90

Structure and mechanical properties of ordered graphene toughened zirconia ceramics prepared by tape casting∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙CAI Weijin, LI Qing, LIU Yao, LIU Shaojun(2):104-111

Defect formation mechanism and influence factors of narrow gap multi-pass fiber laser welding of S275 ferritic

steel sheets∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ZHANG Hong(2): 112-117

Preparation and properties of HfB2-ZrB2-SiC modified C/C composites∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙XIANG Qiuling, TANG Zhenxiao, PENG Ke, YI Maozhong(2): 118-124

Microstructure and flow stress behavior of 2055 Al-Li alloy under hot tension∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙LIU Ning, XIAO Daihong, LIU Wensheng(2): 125-132

Structure and properties of SiC ceramics prepared by dip cracking method based on oriented porous SiC∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙HUANG Yujuan, XIONG Huiwen, ZOU Jinzhu, ZHOU Kechao, ZHANG Dou(2): 133-139

Effect of powder surface modification on the stereolithography of zirconia∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙LI Qing, LIU Yao, CAI Weijin, SHI Yuan, LIU Shaojun(2): 140-147

Microstructure and mechanical property of aluminum matrix composite strengthened by short carbon fiber with Ni-coating (SCF-Ni) ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙JIANG Wenting, LI Guodong, YANG Juan, LIU Yang, YU Shijie(2): 148-156

Effect of ZrB2content and sintering temperature on the microstructure and properties of ZrC-ZrB2composites∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙WANG Yuanyuan, FAN Jinglian, LU Qiong, HAO Ya’nan, GAO Yin(2): 157-163

Morphology and electrochemical performance of high temperature etching boron doped diamond electrode materials∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙LIU Ting, MIAO Dongtian, WEI Qiuping, MA Li(2): 164-170

Microstructure and mechanical properties of C/C composites prepared by a novel slurry injection technique∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙HU Jiao, LI Guodong, ZHANG Yang, HAN Qianwu, JIANG Yi(2): 171-178

Effect of carbon nanotube on thermal properties of copper foam/paraffin composite phase change materials∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙BAO Shengyou, AN Junjie, MA Li, WEI Qiuping, BO Zhenhai, ZHOU Kechao(2): 179-184

Densification behavior of GH4169 ultra-fine curved surface irregular structures formed by high temperature and high pressure flexible media∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙MA Ding, LANG Lihui, XIAO Yi, MENG Fandi, LI Shiyue(3): 185-190

Densification process of pressureless sintered silicon nitride ceramics∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙LIU Wenyong, LI Jianbin, SUN Zhenfei, JIANG Qiangguo(3): 191-196

Microstructure and mechanical properties of selective laser melting of (TiH2+TiB2)/AA7075 composite powders∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙OUYANG Sheng, LIU Yunzhong, SHEN Junjian, XIAO Xiaojun(3): 197-205

Preparation and properties of SiC coating on inner surface of Zr-cladding by PECVD∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙TAN Ruixuan, WANG Honglei, YU Jinshan, LI Huailin, LIU Yanhong, FAN Zheqiong, LU Leiwen, ZHOU Xingui(3): 206-212

Thermoelectric properties of BiSb2−xTe3alloy with layered microstructure optimized by microwave hot pressing∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙LIU Peihai, FENG Bo, HU Xiaoming, LI Rusong, ZHANG Yanglin, FAN Xi’an(3): 213-220

Effect of B-site Hf doping on the structure and properties of 0.94Bi0.5Na0.5TiO3-0.06BaTiO3ceramics∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙PENG Congfei, HUANG Rongxia, LI Jiajiu, XIONG Shunjin, LIN Huatai(3): 221-226

Deoxygenation process of high oxygen niobium powders by magnesium reduction∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙LIU Fang, LI Qingkui, LUO Junfeng, XU Guojin ZHANG Qiaoxia(3): 227-233

Seawater cavitation resistance of supersonic sprayed nano-WC-10Co4Cr and WC-12Co coatings∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙FU Li, LIU Wei, CHEN Xiaoming, ZHAO Jian, LI Yuluo, ZHANG Lei(3): 234-238

Effect of Er2O3on properties of 3D printed zirconia ceramic jewelry∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙WANG Shengliang, LI Lian, WANG Minglang, HE Fupo, LI Yanhui, WU Shanghua(3): 239-244

Crystallization mechanism and morphology of high purity titanium prepared by molten salt electrolysis∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙FENG Xiao, JIANG Yuanyuan, MA Xin, WENG Qigang, YUAN Tiechui, ZHOU Zhihui(3): 245-250

Microstructures and mechanical properties of aluminum matrix composites reinforced with hybrid TiB2and SiC prepared by selective laser melting∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙SHEN Junjian, LIU Yunzhong, OUYANG Sheng, HONG Xuchao, LIU Xiaohui(3): 251-259

Preparation of Ni10Mo/CF composite as an electrocatalyst for hydrogen evolution reaction in alkali solution∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙PU Jiaxuan, CAO Jun, WEI Qiuping, YIN Dengfeng, MA Li, ZHOU Kechao(3): 260-266

Microstructure and properties of FeCr and CoCr laser cladding coatings∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙LIU Wei, FU Li, CHEN Xiaoming, ZHANG Lei, LI Yuluo, ZHANG Kai(3): 267-272

Effect of milling time on the microstructure and mechanical properties of M2 powder metallurgy high speed steel∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙YANG Junhao, LIU Rutie, XIONG Xiang, LUAN Huaizhuang, HAO Yanrong, YANG Baozhen, CHEN Jie(4): 296-303

Microstructure and properties of MIM 17-4PH stainless steel prepared by nitrogen sintering process∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙WANG Yue, LI Ruidi, YUAN Tiechui(4): 304-311

Effect of Cr content on high temperature oxidation behavior of porous NiCrMoCu alloys∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ZOU Haoran, LI Xide, ZHANG Chuo, YANG Junsheng, HE Yuehui(4): 312-320

Nano-SiC addition on microstructure, mechanical properties and high temperature oxidation resistance of Ti(C,N)-based cermets∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙GONG Difan, LI Yongxia, YANG Hailin, ZOU Dan, LIU Yanjun(4): 321-329

Effects of LaB6addition on densification behavior, microstructure and mechanical properties of Ti(C,N) based cermets∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙HUANG Jianhua, ZHANG Meimei, KANG Xiyue, LIN Nan, YAN Yan, QIU Song, LIU Yi, HE Yuehui(4): 330-337

Effect of magnesium aluminate spinel on the microstructures and mechanical properties of 95 alumina ceramics∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙FANG Haojie, LIU Qiuyu, HE Yiwen, GUO Weiming, ZHANG Xiaoyun, ZHU Linlin, ZENG Chao, LIN Huatai(4): 338-343

Densification mechanism of Ti-1Al-8V-5Fe alloy by spark plasma sintering∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙LI Wenjie, ZENG Fanhao, LI Lei, WANG Ziwei, LIU Honghao, PENG Yirui, GU Yi(4): 344-351

In vitro histocompatibility of TNZS-based biomaterials∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ZHAO Qian(4): 352-357

Microstructure and mechanical properties of siliceous rock/A356 composites for construction prepared by spray forming∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙LI Kui, ZHANG Zhaofang, MA Nan, LI Ming(4): 358-362

Effect of the speed on current-carrying friction and wear behavior of AuNi9 on AuAg35Cu5 disc∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ZHOU Xiong, LUO Bo, KANG Xiao, ZHANG Lei(5): 369-374

Preparation of ultrafine tungsten powder by nano-tungsten assisting hydrogen reduction of tungsten oxide∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ZHANG Yong, ZHANG Guohua(5): 375-380

Effects of carbon content on the microstructure and performance of WC-TiC-Co cemented carbides∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙LUO Ren, XIONG Huiwen, CHEN Nan, LI Zhiyou(5): 381-388

Process research on particle size characteristics of reduced tungsten powder∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙CHEN Shanshan(5): 389-395

Effect of binder on properties of iron based mixed powder∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙SU Fengge, ZHENG Zhuo, CHEN Lushui(5): 396-402

Effects of B content on microstructure and properties of CrFeCoNiTi0.6high-entropy alloy∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙JIANG Yue, LI Xiuming, ZHOU Guangtai, ZHU Baixiang(5): 403-409

Microstructure and properties of Al2O3coating on the surface of hoist piston rod prepared by explosive spraying∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙FU Li, CHEN Xiaoming, MAO Pengzhan, LIU Wei, ZHANG Lei, ZHANG Kai, LI Yuluo(5): 410-416

Effect of premix ratio on mechanical properties of silicon nitride ceramics prepared by stereolithography∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙LIU Yao, HE Yu, XIN Feng, WANG Bin, ZHAN Lina, WEN Ruquan, XIAO Wenfu, LIU Shaojun(5): 417-423

Ball milling mixing progress for preparation of polycrystalline cubic boron nitride composites∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙XIE Hui, DENG Fuming, WANG Hao, HAN Shunli, FENG Fei(5): 424-432

Removal process of Mg impurity in AlCl3·6H2O∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙CHAO Xiaoguang, GAO Guimei, WANG Hongbin, CAO Kun, DAI Yin, SONG Litao, ZOU Ping, WANG Yongwang(5): 433-439

Friction and wear properties of PM Zn-W alloy reinforcing copper-based friction material for mining truck clutches∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙XIE Maoqing, WANG Leigang, PENG Peng, YANG Guosheng, ZHANG Jiahao(5): 440-448

Characterization of Y2O3reinforced Ti-6Al-4V composite powder prepared by electrode induced gas atomization∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙LIU Lianping, CHEN Shiqi(6): 449-457

Effects of SiC content on the composite membrane structure and friction properties of Ti-6Al-4V alloy for internal combustion engine∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙WANG Xue, YU Xiutao(6): 458-464

Quantitative characterization of Inconel 718 alloy powder particle shape and optimization of its SLM forming process∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙XU Yang, ZHANG Rong, XIAO Zhiyu(6): 465-474

Microstructure and corrosion properties of laser cladding CoCrW coating on 37Mn5 steel surface of oil and gas pipeline∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙WANG Rongjian, LIANG Jinlu, HUANG Xiaoyu, SHI Haixin(6): 475-479

Microstructure and nano-indentation behavior of detonation sprayed iron-based amorphous coating∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙OUYANG Sheng, CHU Zhiqiang, TANG Qiuhao, XIE Lu(6): 480-485

Microstructure and properties of bindeless Ti(C,N)-based cermets prepared by spark plasma sintering∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙LU Saijun, KANG Xiyue, ZHANG Meimei, HE Yuehui(6): 486-496

Microstructure and properties of pure molybdenum block prepared by selective electron beam melting∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙LI Huixia, ZHU Jilei, TAN Yannni, LIU Bin, CHEN Rui, ZHAO Pei, YI Yang(6): 497-504

Effects of SPS process parameters on microstructure and high-temperature oxidation resistance of ZrB2-MoSi2-SiC composite ceramics∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ZHANG Yudong, LI Jiwen, WANG Nannan, PAN Kunming, ZHANG Liangliang(6): 505-512

Effects of ball milling time on microstructure and properties of NbMoTaWVCr refractory high entropy alloy∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙PENG Haiyan, KANG Zhixin, LI Xiaozhen, ZHOU Li, LONG Yan(6): 513-519

Thermal degradation and judder characteristics of the friction facing for automobile dry clutch enhanced by potassium hexatitanate whisker∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙XIE Maoqing, WANG Leigang(6): 520-526

Effect of nozzle inlet angle on the atomization process of Si3N4particles prepared by dry granulation∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙LIAO Dahai, FANG Yongzhen, ZHOU Jiangen, GAN Zhenhua, FANG Changfu, WU Nanxing(6): 527-537

Effect of coating on steel back of Cu-based powder metallurgy brake materials on carburizing resistance ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙CAO Wenming, YAO Pingping, ZHOU Haibin, ZHAO Lin, XU Liang, XIAO Yelong(6): 538-544