中南大学学报（自然科学版）2020年总目次

第1期

氧化剂在刺槐豆胶浮选分离方铅矿和闪锌矿中的作用及机理………………………………………………冯博，郭宇涛，王涛，彭金秀，张良柱，钟春晖，汪惠惠（1）

硫酸铵/硫酸体系对不同类型粉煤灰铝提取的影响………………………………………辛海霞，徐玉君，崔富晖，吴艳，林捷，任杭，牟文宁，翟玉春（8）

振动搅拌工艺制备轻质高强钢纤维混凝土………………………罗为，熊光启，熊晨晨，郑亚林，王冲（14）

应变强化对022Cr17Ni12Mo2不锈钢疲劳行为的影响………高毅，彭剑，代巧，薛志超，王颖，李凯尚（23）

基于万能运动参数的弧齿锥齿轮建模方法…………………………………………唐祎，何玉辉，唐进元（33）

基于线激光传感器的盾构管片位姿检测方法…………高翔，陶建峰，王明斗，刘成良，杨正，庄欠伟（41）

二齿差摆盘式活齿传动的接触力学…………………………………………………贺亚博，梁尚明，杨勇（49）

基于试验和数值模拟耦合计算的汽油机缸内RGF检测方法对比及分析………………………………………………………廖诚，刘敬平，任承钦，刘琦，李庆宇，付建勤（59）

基于最大互信息系数属性选择的冷轧产品机械性能预测………………………颜弋凡，安路达，吕志民（68）

基于非局部均值去噪和快速谱相关的滚动轴承早期故障诊断方法………………………万书亭，彭勃（76）

模块化多电平换流器优化模型预测控制策略………………………………………黄智，夏向阳，赵昕昕，刘远，石超，陈泱屹，肖治宇，曹伯霖（86）

工艺参数对楔横轧42CrMo/Q235层合轴复合界面显微硬度的影响……张孝，彭文飞，束学道，吴志军（94）

改进的鲸鱼优化算法及其在烧结配料中的应用………………伍铁斌，朱红求，龙文，李勇刚，刘云连（103）

准噶尔盆地玛湖凹陷风南4井区百口泉组砾岩致密油藏地质"甜点"测井评价………………………………………………焦晨雪，王民，高阳，黄文彪，卢双舫，关莹，钱根葆，覃建华，周能武，田伟超，汪志璇，徐建鹏（112）

基于CT扫描的垃圾结构及渗透特性……………………………………………孟猛，秦蕊，罗鹏，柯瀚（126）

基于Hoek-Brown破坏准则的岩溶区圆形基础下伏孔洞冲切破坏上限分析………………………………………………………………………李亮，曾中林，王志斌，李韬宇（134）

隧道双层预支护力学分析模型……………………赵晨阳，曹豪荣，彭立敏，施成华，雷明锋，杨伟超（145）

膨胀岩地基浸水条件下双线无砟轨道路基变形特性…………段君义，杨果林，刘洋，阚京梁，邱明明（156）

钢桁梁斜拉桥复合式索锚结构疲劳试验研究…………………………………曹珊珊，雷俊卿，黄祖慰（165）

基于质量分数垂线分布的粗骨料充填料浆特性表征……………………………李立涛，陈得信，高谦（176）

金属矿山气-水喷头雾化特性及降尘能力实验研究………………………………蒋仲安，王亚朋，许峰（184）

高温后花岗岩的物理力学特性试验研究………………吴阳春，郤保平，王磊，牛新明，王帅，赵阳升（193）

生土基砌体抗压强度测量标准试件的试验研究……………………兰官奇，王毅红，蒋子腾，王天涯（204）

斜拉索损伤对在役斜拉桥体系可靠度的影响………………………………………………颜东煌，郭鑫（213）

基于时频熵和神经网络的光伏发电功率预测模型………………………………………孙志强，李东阳（221）

结霜初期超疏水表面液滴生长的规律…………………………………赵伟，梁彩华，成赛凤，罗倩妮（231）

管道内瓦斯爆炸火焰传播压力与温度特性…………………王秋红，王二飞，陈晓坤，蒋军成，张明广（239）

长江下游地区倒Y形混凝土桥塔的三维日照温场及其效应………………顾斌，谢甫哲，钱海，雷丽恒（248）

CeO2-MnOx/CF对甲苯的催化氧化性能……………………………………………王玉玲，宋敏，孟凡跃（261）

不同制备方法对Cu-Co/ACN同时脱除Hg0和CO性能的影响………唐晓龙，王雨禾，易红宏，高凤雨（269）

第2期

助磨剂对氧化铁矿石磨矿动力学行为的影响……………………………谢冬冬，侯英，盖壮，黄贵臣，齐双飞，徐冬林，韩呈，陈来保，朱巨建（279）

自结炉衬电熔窑调质过程数值模拟…………………………………………………宋锐，苏福永，温治（287）

基于均相沉淀法制备高纯度球形钌粉……………裴洪营，赵家春，吴跃东，保思敏，杨海琼，董海刚（294）

过时效态Al-Zn-Mg-Cu合金断裂韧性与显微组织分析………………………林亮华，刘志义，韩向楠（301）

Cu质量分数对Al-1.0Mg-1.0Si-0.6Mn合金显微组织和性能的影响……刘名鑫，邓运来，张臻，唐建国（309）

TBM空间管道动态特性分析………………………………………………孙文倩，张怀亮，瞿维，熊宇（319）

TBM刀盘滚刀布置对倾覆力矩的影响规律……………………暨智勇，夏毅敏，兰浩，杨妹，林赉贶（327）

基于高频电磁阀压力控制的列车制动电液系统仿真…………李文静，龚国芳，刘建，张亚坤，杨华勇（340）

减振铣刀切削钛合金TB6颤振和切削力分析…………………………………刘建永，乔立红，陈五一（349）

声弹性螺栓应力测量影响因素…………………………………韩玉强，吴付岗，李明海，梅军，王小龙（359）

污染物对热膜式气体流量传感器精度的影响…………………………………袁昌荣，孙中圣，李小宁（367）

基于多方向Gabor特征图协同表示的鲁棒人脸识别……………………张培，徐望明，伍世虔，靳晓缘（377）

复杂地质条件区页岩气聚集差异性及其意义：以湘西北古生界为例………………………………………………………………李智文，郭建华，秦明阳，黄俨然，曹铮（385）

Mohr-Coulomb准则的试验验证与修正………………………………………………………曹艺辉，李铀（399）

排水剪切状态下饱和软土微观接触面积演化规律试验研究……………徐日庆，蒋佳琪，董梅，徐丽阳（411）

边界条件对多年冻土区高速公路整体式和分离式路基热稳定性的影响……………………………………………………栗晓林，马巍，穆彦虎，牛永红，黄永庭，柴明堂（420）

变截面隧道开挖地表土体移动与沉降预测………………………………李涛，王益博，郁志伟，刘波（433）

硬质黏土层顶板的铝土矿采空区护顶层安全厚度…………………………………………姜立春，杨超（445）

基于HOEK-BROWN软化模型的支护结构稳定性分析…………………………………苏永华，邹宇恒（453）

槽钢连接的新型地下管幕构件力学性能………………………………………张超哲，赵文，贾鹏蛟，韩健勇，李慎刚，柏谦，程诚，陈阳（464）

全尾砂-粗骨料膏体早期抗压强度影响规律及固化机理………………………………………尹升华，刘家明，邵亚建，张海胜，ARMELLE Belibi，寇永渊（478）

石膏-熟料质量比对矿渣充填胶凝材料性能的影响及应用………………李立涛，高谦，陈得信，吴凡（489）

荷载振幅对X形桩-筏复合地基动力响应特性影响的试验研究………孙广超，孔纲强，刘汉龙，楚剑（499）

隧道爆破振动对新浇超短龄期混凝土二衬的影响…………………………………………贺泳超，陈秋南，衣利伟，黄向韬，曾奥，周相识，周光裕（507）

能源桩全生命周期热响应半径简化计算方法………王哲，刘耶军，张正威，翁凯文，郑秀玲，许四法（514）

裂隙岩体渗流-传热的时域半解析计算方法……………………………………………刘东东，项彦勇（523）

超疏水表面黏附性对冷凝传热的影响…………………………周儒鸿，纪献兵，孔庆盼，郭浩，徐进良（532）

涡流发生器对垂直轴风力机翼型气动性能的影响…………………………张立军，朱怀宝，顾嘉伟，马东辰，米玉霞，于洪栋，刘静，缪俊杰，李想（540）

脏污对有砟道床动力特性影响的离散元分析……………………………………崔旭浩，肖宏，肖慧娟（551）

基于激光雷达的铁路轨道检测方法………………………………………………郭子明，蔡伯根，姜维（560）

第3期

低品位红土镍矿粗细分级-重磁联合除铬工艺…许鹏云，方浩，陈洲，刘波，蒋振康，郭学益，许开华（567）

铝酸钠溶液净化除锂及其反应机理研究…………唐文奇，彭志宏，刘桂华，周秋生，齐天贵，李小斌（579）

基于"炉-机匹配"的炼钢-连铸过程多工序运行仿真………………………………………………杨建平，洪宇杰，刘倩，王柏琳，高山，郭伟达，刘青（587）

酒石酸辅助均匀沉淀法制备TiO2/氧化锡锑…………王亚男，马坤怡，王佳爽，钱建华，邢锦娟，刘琳（600）

工程机械用Q1100钢的热变形应变补偿本构方程………………李红英，赵菲，刘丹，张青学，倪川皓（608）

基于石墨烯复合薄膜的应变传感器及性能分析…………………………………卫军，吴志强，董荣珍（619）

单向带与织物碳纤维增强树脂基复合材料中孔隙的细观特征………………史俊伟，荀国立，刘松平（628）

避障模式下深海采矿系统动力学分析……………………………………………徐海良，彭能，杨放琼（641）

汽车技术性能综合评价方法及应用…………………………………欧阳鸿武，肖叶萌，胡仕成，唐昕，雷刚，BLUMENFELD Raphael（650）

交流电力测功机的支持向量机模糊PID控制策略………………钟定清，王艾伦，何谦，魏克湘，唐勇（661）

基于积分泄漏的机电伺服系统摩擦力补偿……………………朴敏楠，王科磊，孙明玮，黄建，陈增强（668）

考虑驱动摩擦效应的冗余并联机构动力学建模…………卢超，秦伟，胡小亮，唐小斌，刘飞，谢志江（678）

基于动态辊缝的连轧机多参数耦合颤振建模及工程应用……………王桥医，张秋波，王瀚，崔明超（687）

CSP产线全流程负荷分配策略优化………………………………………陈小睿，张殿华，马建阳，彭文（697）

能量获取D2D异构网络中频效优化的资源管理算法…………………………赵佳豪，邝祝芳，邓晓衡（704）

基于图像三维重建的隧道超欠挖检测方法研究………阳军生，张宇，祝志恒，傅金阳，谢壮，王立川（714）

循环加卸载条件下脆性岩体裂纹演化规律…………………………………………………周详，李江腾（724）

波动承压水作用下基坑底部弱透水层超静孔压试验研究……………应宏伟，王迪，许鼎业，章丽莎（732）

新型限制力装置滞回性能试验研究………………………………………………………胡振青，邓长根（739）

偏心堆载作用下盾构隧道横断面变形规律及其控制限值……………魏纲，洪文强，魏新江，蒋吉清（750）

基于BP神经网络的采空区激光探测环境误差修正……………………侯朋远，徐帅，梁瑞余，纪晓飞（758）

影响级配碎石填料冻胀特性的多因素渐进回归分析………………吴鹏，罗强，余浩，刘孟适，王腾飞（767）

基于库仑摩擦原理的充填体强度力学模型…………………………常宝孟，杜翠凤，魏丁一，张爱卿（777）

循环荷载作用下绿泥石千枚岩弹性模量演化规律试验研究……………………周阳，苏生瑞，马洪生（783）

带窗洞自保温暗骨架承重墙抗震试验及承载力计算…刘康，岳艺博，王少杰，刘福胜，周满，孙宏伟（793）

喷射控制策略对增压直喷汽油机燃烧和性能的影响…………………………………………………李洋洋，段雄波，刘敬平，谭永浩，解云坤，罗宝军（805）

含稀相粒子的纳米燃油喷雾特性模拟研究……………………蔡维一，梅德清，刘正，赵晓东，袁银男（816）

地铁线路轨距对轮轨接触行为的影响………………………陈嵘，温静，于浩，安博洋，徐井芒，王平（824）

基于货物列车抗脱轨安全度的重载铁路轨道结构强化措施评价…………………龚凯，向俊，刘林芽（832）

基于单元建模法的怠速工况传动系建模及多种扭转减振器性能对比…………陈龙，史文库，陈志勇（842）

全速度区间内车体多重被动式吸振器减振方法…………………………文永蓬，宗志祥，翁琳，邹钰（853）

第4期

硫化矿石常温氧化模拟及基于神经网络的氧化活性预测………………………………………………刘正洲，潘伟，吴爱祥，吴超，邓舵，冯宴熙，杨奉龙（863）

阳极涂层下铝电解槽温度场分布与工业实验研究……………孙帅更，李茂，程本军，李贺松，侯文渊（872）

水滑石基Ni（Mn，Cu）Fe复合氧化物的制备及其低温NH3-SCR应用…………………………………………………………………次超，杜亚丽，杨宝拴，邹春蕾，吴旭（882）

碳纳米管表面缺陷对聚甲基丙烯酸甲酯基体弹性的影响…………………………………………………………李云龙，杨斌，唐黎明，李皓，王照智，刘冬（893）

正交各向异性功能梯度微板弯曲行为尺度效应…………………………康泽天，张岩，周博，薛世峰（902）

滑石粉在膨胀型透明防火涂料中的协效阻燃和抑烟作用………………徐志胜，谢晓江，颜龙，周寰（912）

抑制铝粉尘云爆炸的粉体材料效能对比分析…………………………………王秋红，申中一，王清峰（922）

垂直轴风力机尾缘开裂襟翼气动性能及其偏转角调节规律………………………………张立军，顾嘉伟，朱怀宝，胡阔亮，江奕佳，缪俊杰，王旱祥，刘静（931）

基于变质心高度策略的双足机器人变步长步态规划……………………………………周江琛，肖晓晖（944）

基于有限单元法的裂纹梁结构疲劳寿命预测模型………………………………龙慧，刘义伦，李松柏（953）

超高压自能式灭弧室吹弧性能优化…………………………李巧全，巫世晶，黎小峰，李小勇，赵文强（962）

基于CFD的GTF发动机风扇驱动齿轮箱行星齿轮风阻损失分析…鲍和云，王春雷，陆凤霞，朱如鹏（971）

可重复使用运载火箭一子级垂直回收有限时间滑模控制……………李晓栋，廖宇新，廖俊，罗世彬（979）

基于利萨如图形及关联度分析的高压输电电缆护层故障识别研究……………………………………………赵威，夏向阳，李明德，潘志敏，雷云飞，刘卫东，张静（989）

海陆交互相与陆相页岩储层差异性特征：以鄂尔多斯盆地东北部临兴—神府工区山西组为例……………………………薛纯琦，吴建光，钟建华，刘渠洋，张守仁，侯梦祥，李丰田，彭超锋（998）

深厚强透水地层基坑深层水平封底隔渗帷幕设计方法及其应用………………………………………………曹成勇，施成华，彭立敏，蒋盛钢，刘胜利，刘建文（1012）

冻胀过程管土相互作用规律及受力特征……………黄龙，盛煜，吴吉春，黄旭斌，何彬彬，张玺彦（1022）

基于足尺模型试验的边坡裂隙发展演化规律………………………………………张家铭，罗易，周峙，CHIKHOTKIN Victor，袁超，王少锋（1037）

冻融循环下隧道围岩冻胀力理论计算…………………………………………………刘红岩，赵雨霞（1049）

多中段高溜井卸矿口气流分布及影响因素……………………………………王九柱，蒋仲安，王亚朋（1059）

立井井筒失稳机理与加固方法……………………………………………李康，高永涛，周喻，李建旺（1068）

U形渠道地基用盐渍土冻融试验…………………………李宏波，田军仓，于广云，严鹏飞，殷建光（1077）

BFRP网格-PCM薄面黏贴加固钢筋混凝土板抗弯性能………丁里宁，贺卫东，汪昕，程方，吴智深（1085）

榫式连接拼装RC柱轴压性能数值分析…………………………张世江，郭子雄，刘阳，叶勇，刘小娟（1097）

特高压长悬臂输电塔结构风振扭转响应……………………………张骞，叶震，蔡建国，余亮，冯健（1108）

粗粒土路堤填料力学特性及其细观模拟研究…………………何忠明，黄超，刘雅欣，范电华，杨煜（1116）

复合热源热泵集热/蒸发器的结构优化模拟……………………………………方雷，李舒宏，许成城（1125）

基于热棒防灭火技术的煤自燃区域热迁移特征……………………李贝，高伟，邓军，毕明树，马砺（1135）

蠕滑曲线对地铁小半径曲线轮轨接触特性的影响………王平，郭强，李晨钟，陈嘉胤，徐井芒，钱瑶（1145）

扣件失效对地铁整体道床动力性能的影响……………魏纲，董北北，蒋吉清，苏鑫杰，王立忠，丁智（1154）

第5期

低品位高硫铝土矿静态焙烧脱硫及溶出性能………………………吴鸿飞，夏飞龙，李军旗，陈朝轶（1163）

粉煤灰基介孔ZSM-5的孔径调控以及催化油烟中戊醛……………………………………………李建，石应杰，付晓恒，张凡，黄家玉，刘燕丽，朱金伟（1174）

掺磨细镍铁渣混凝土的耐久性及其与孔结构和水化程度的关系………………………………………………………………王申，李保亮，潘子云，孙超，张亚梅（1189）

正交各向异性功能梯度微板的自由振动行为……………………………康泽天，张岩，周博，薛世峰（1200）

抛光工艺中镁铝合金粉燃爆参数分析…………………………………王秋红，闵锐，孙艺林，代爱萍（1211）

电磁驱动二维精密平面运动平台设计与控制………………张威，周海波，黄珍里，孔志平，段吉安（1221）

基于多响应频响函数的加筋壁板结构模型修正…………………………展铭，郭勤涛，岳林，张保强（1228）

三圆弧谐波齿轮传动齿廓设计及参数优化…………………时志奇，杨勇，贺小飞，黄彦彦，周青华（1234）

偏心切口对棒料裂纹起裂和扩展的影响……………………………张立军，张军伟，金永山，陈先锋，张德培，任芋见，王旱祥，刘延鑫（1245）

湘中南中奥陶统烟溪组页岩地球化学特征及有机质富集机理………………………………吴诗情，郭原草，郭建华，李智宇，李杰，刘辰生，王玺凯，郭祥伟（1255）

伪随机编码磁性源瞬变电磁发射技术及电磁响应分析……石琦，刘丽华，倪志康，刘小军，方广有（1268）

差异变形下地铁盾构隧道内行车舒适性研究………………施成华，刘建文，李翔，雷明锋，彭立敏（1279）

连续排水边界条件下饱和软土一维大变形固结解析解…………………………江文豪，詹良通，杨策（1289）

再生陶粒混凝土吸音板的制备与声学性能………栾皓翔，吴瑾，朱万旭，潘佳玉，张瑞东，周红梅（1299）

高浓度粗骨料充填料浆抗离析特性及其数学模型………………………吴凡，杨晓炳，杨志强，高谦（1309）

动压巷道顶板非均匀剧烈变形机理及其稳定性控制………………李臣，霍天宏，吴峥，吕坤，张兵（1317）

基于Pasternak双参数模型的滑坡段埋地管道受力分析方法………张家铭，尚玉杰，王荣有，王殿龙（1328）

基于广义Kelvin模型的非定常盐岩蠕变模型…………………………………韩伟民，闫怡飞，闫相祯（1337）

带可更换阻尼器的波形钢板剪力墙抗震性能试验研究…………………王威，韩斌，王万志，黄元昭（1350）

套筒灌浆缺陷下装配式混凝土柱及框架的抗震性能…………………蒋友宝，袁汉卿，周浩，罗文辉（1361）

盾构穿越上软下硬复合地层时的管片力学特性…黄戡，孙逸玮，赵磊，戴亦军，王栋，周经伟，邱朗（1371）

基于Gamma随机过程的西部严酷环境下钢筋混凝土可靠性评估……乔宏霞，杨博，路承功，朱彬荣（1384）

页岩抗张力学行为各向异性实验与理论研究……马天寿，王浩男，刘梦云，彭念，郑南鑫，易晟昊（1391）

岩石取芯切削钻进过程温度分析与试验研究…………………钱磊，王晓川，康勇，马志伟，向美景（1402）

激光染料循环系统性能试验研究…………………………………刘厚林，景玉成，杨斌，夏青，王凯（1410）

PPG信号用于高温高湿伤害预警的可行性研究………………………王梦飞，金龙哲，于露，徐明伟（1424）

基于未确知测度的车辆基地选址规划评价…………………………………………王卫东，颜文，高华（1431）

考虑安全的城市轨道交通三级客流控制模型…………………………………陈治亚，甘金荣，王小军（1441）

交叉口群信号宏观控制效率分析………………………………………………黎茂盛，姚力煊，王永亮（1451）

一种试验与仿真联合的阻尼车轮降噪效果评价方法……………………………………………………赵延垒，韩健，徐圣辉，朱自未，覃才，肖新标（1461）

第6期

砷硫铁的脱除对高砷金精矿氰化浸金的影响………………张霜华，郑雅杰，曹攀，赖慎志，张华军（1471）

阳极焙烧过程中的温度分布及挥发分逸出行为……………………………………冯明杰，郭奕，毛成（1481）

污酸浸出锌窑渣过程中铜的浸出行为及动力学研究………………………………………曾涛，邓志敢，张帆，樊刚，魏昶，李兴彬，李旻廷，刘慧杨（1489）

数控周边磨床主轴系统热关键点选取及热误差建模…………………廖启豪，王玲，殷国富，谢政峰（1501）

并联双杆液压缸偏载力和径向力分析…………………………訚耀保，李双路，陆畅，原佳阳，肖强（1509）

阀控电液位置伺服系统滑模反步控制方法……………………………吉鑫浩，汪成文，陈帅，张震阳（1518）

基于轴线偏转切片法的料滴体积测量方法………………邹光明，周世凡，王兴东，刘源泂，刘怀广（1526）

PTFE半间歇聚合反应过程模型及其自抗扰温度控制………………金晓明，童不凡，阮骁骏，王家栋（1534）

热定型过程织物单位面积质量在线控制系统建模及其滞后补偿控制设计方案……………………………………………………………李平，王鹏兴，梅小华，金福江，刘建宝（1542）

基于CSP-PSO-SVM的运动想象EEG信号特征提取与分类算法………………………………………………………………刘宝，唐雨琦，蔡梦迪，薄迎春，张月（1551）

基于能耗效率的SiCp/Al复合材料切削参数多目标优化…………王进峰，潘丽娟，邢迪雄，丁海民（1565）

交通荷载下考虑倾斜基岩影响的单桩桩周土振动特性数值模拟…………………………………………………………杨金川，丁选明，王成龙，吴岱峰，肖治微（1575）

基于UHPC华夫桥面板应用的桥梁性能提升方法…………………朱劲松，徐余锋，孙雅丹，盛荣荣（1584）

基于RSM的胶结充填体强度回归及料浆寻优研究…………………………………………尹升华，郝硕，邹龙，寇永渊，李希雯，ARMELLE Belibi（1595）

不同湍流边界层中高层建筑模型气动力特性………………………李石清，王汉封，罗元隆，罗振兵（1606）

黄土粒度组成对其渗透系数各向异性影响的试验研究………赵茜，苏立君，刘华，何江涛，杨金熹（1615）

基于光纤监测的大直径变截面钢管复合桩承载性状…………崔允亮，王新，周联英，王海峰，周锋（1627）

石结构滑移隔震缝力学性能试验研究…………………………………………江云帆，郭子雄，许秀林（1637）

海底强风化花岗岩K0固结三轴试验尺寸效应…………………………………………李传懿，陈志波（1646）

高层装配式剪力墙结构地震损伤性能评估………秦朝刚，白国良，吴涛，刘伯权，徐亚洲，苏宁粉（1654）

城市轨道交通高架桥"降噪型"动力吸振器参数优化…………周力，张天琦，罗雁云，陈大磊，吴尚（1664）

基于不均匀粒径分布的颗粒穿流特性…………金爱兵，陈帅军，孙浩，赵怡晴，覃璇，巨有，高艳华（1673）

三室土壤MFC修复Cu污染土壤的模拟研究…………………周璇，王辉，张婧然，孙艺伦，李先宁（1682）

基于正态信息扩散原理的极值型工程参数概率分布推断方法………………宫凤强，王天成，黄天朗（1692）

改进的属性区间识别方法及其在隧道突涌水风险评估中的应用……………………………………………周宗青，孔军，杨为民，陈元培，张琦，李利平，石少帅（1703）

地铁车轮凹陷磨耗对踏面接触应力的影响………………………………周志军，李伟，陈斌，温泽峰（1712）

基于自由变形技术的汽车除霜风道导流板参数优化……………………………………………………曹斯诗，张志飞，徐中明，贺岩松，陈竹，周涛（1721）

微波加热强化闪蒸的蒸发特性……………………………………………田时泓，郭磊，巨少华，张晖（1730）

微粒捕集器分区域微波再生过程功率优化…………胡洋春，吴钢，李岳林，李宗霖，张健，冯仁华（1738）

第7期

输出型式对星轮减速器承载能力的影响………………………………………………夏建芳，高杨博（1747）

基于数字图像相关的旋转叶片全场测量……………………叶美图，梁晋，千勃兴，宗玉龙，龚春园（1757）

四自由度绳驱动刚柔混合式波浪运动补偿机构的动力学建模………………………姜媛，唐梁，陈原（1767）

利用混沌吸引子阶跃变化现象检测滚动轴承微弱故障………………………闫晓丽，唐贵基，王晓龙（1781）

多层螺旋线圈电磁超声换能器优化设计及其实验研究………………………………………唐琴，石文泽，卢超，陈巍巍，张金，陈尧，黄祺凯，程进杰（1792）

变桨对大型H型垂直轴风力机主轴偏振的影响…………………………………张立军，胡阔亮，顾嘉伟，朱怀宝，江奕佳，缪俊杰，李想，刘静（1804）

基于轮廓重合度分析的道路标记鲁棒识别……………………陈家成，肖晓明，黄余，唐琎，耿耀君（1813）

基于一种分数时滞状态闭环泛函的量化采样系统稳定性分析……………陈刚，陈云，王炜，李亚琦（1825）

一种考虑成像特性的摄像机线性标定方法……………………张磊，汤小伟，李红兵，戴丽娟，姚阳（1832）

模拟降雨下微膨胀性路基膨胀变形行为试验研究…………杨果林，段君义，胡敏，阚京梁，张立伟（1842）

基于实际影响线的移动车辆过桥动力放大系数计算方法…………………………王宁波，周逸，周德（1853）

行波激励对非对称矮塔斜拉桥抗震性能的影响…………………………………潘思璇，唐冕，宋旭明（1862）

正交异性钢桥面板的疲劳裂纹扩展规律……………………………………………………汪珍，王莹（1873）

预应力加筋技术调整路堤差异沉降模型试验研究………………………卢谅，唐甜甜，王宗建，杨东（1883）

加卸荷条件下非贯通节理岩体破坏特性研究……赵怡晴，刘佳伟，金爱兵，孙浩，王本鑫，魏余栋（1893）

矿产图储量数据智能匹配与更新关键技术…………………………邓吉秋，李晨菡，方青磊，路馥毓（1902）

单轴压缩下节理砂岩能量演化机制倾角效应……………………………………王桂林，文兴祥，张亮（1913）

基于TSS-DInSAR方法的注浆采区地表动态沉降分析……王剑，董祥林，杨可明，姚树一，石晓宇（1924）

斜坡地基桩前土抗力的应变楔模型修正……………………………彭文哲，赵明华，杨超炜，刘亚楠（1936）

复合固化剂加注方法对土遗址加固效果的影响……………张迎敏，谌文武，杨光，戴鹏飞，李永杰（1946）

单轴压缩下不同养护龄期尾砂胶结充填体损伤特性及能量耗散分析………………………………………………………………………侯永强，尹升华，曹永，戴超群（1955）

基于扣件阻力试验的高速铁路桥上无缝线路纵向力研究…………………………………………………………朱志辉，李晓光，闫铭铭，赵衍刚，盛兴旺（1966）

全长黏结GFRP抗浮锚杆荷载分布函数模型研究……………白晓宇，张明义，匡政，王永洪，闫楠（1977）

考虑3种因素影响的硫氧镁水泥固化土修正邓肯-张模型…………朱剑锋，徐日庆，罗战友，饶春义（1989）

车用驱动电机冷却系统仿真研究…………………刘慧军，陈芬放，黄瑞，常晋伟，韦靖邦，俞小莉（2002）

车轮谐波磨耗对轮轨垂向力及车辆稳定性的影响…………谢建平，陈治亚，潘瑛，谢建波，王乾宇（2013）

考虑枕下胶垫超弹性本构的弹性长枕轨道动力仿真………………王启好，蔡小培，常文浩，赵闻强（2021）

温度梯度作用下板式轨道黏弹性和弹性分析的对比……………张艳荣，吴楷，高亮，蔡小培，严熵（2028）

城轨列车转向架积雪结冰原因分析及其防治…………………………高峰，刘明杨，马冬莉，高广军（2039）

第8期

湘中地区早寒武世牛蹄塘组黑色岩系地球化学特征与有机质富集机理……………………………………………吴诗情，郭建华，王玺凯，李智宇，刘辰生，焦鹏，陈广（2049）

砾石土防渗料压实特性……………………………………………………周怡，彭振斌，何忠明，尹泉（2061）

长沙典型地层土压平衡盾构掘进参数及表现预测…………………杨果林，张沛然，陈亚军，沈臻鑫（2069）

热带低压影响下平潭海峡公铁两用大桥桥址处风雨特征分析……何旭辉，汪震，严磊，任磊，郭辉（2081）

温度荷载下桥上CRTSⅡ型无砟轨道结构层间位移试验研究…………………………………………………周凌宇，张营营，余志武，张广潮，赵磊，袁亚慧（2093）

城市轨道交通板式无砟轨道结构摊铺层粗糙表面的构建及评价指标研究…………………………………………陈宪麦，彭俊，姜晓文，王跃跃，王梦林，刘耀强，郭世豪（2102）

刚性基础下砼芯水泥土桩复合地基沉降计算……………俞建霖，徐山岱，杨晓萌，陈张鹏，龚晓南（2111）

±1 100 kV特高压输电塔风振响应频域分析…………………………………杨子烨，宋雪祺，邓洪洲（2121）

考虑非达西流固结土体中桩基承载时间效应研究……………………………于光明，龚维明，戴国亮（2132）

混凝土泵送管道振动监测与分析………………………………杜婷，王本武，叶豪，徐明利，李智莹（2143）

不同方法快速测定土的含水率的可靠性研究……………………………谌文武，陈浩鑫，毕骏，李湘（2152）

基于改进粒子群深度神经网络的频率域航空电磁反演…………………………………………廖晓龙，张志厚，范祥泰，路润琪，姚禹，曹云勇，徐正宣（2162）

考虑干密度影响的红黏土蠕变特性及蠕变模型研究…………………李娜，陈昌富，朱世民，毛凤山（2174）

不同轴压比RCS梁柱组合件抗震性能分析……………………………………………白巨巨，李升才（2183）

木材表面嵌筋黏结-滑移试验方法………………………………………………………阿斯哈，周长东（2197）

单股钢丝绳丝间多层耦合接触性能研究…………………………………………………陈原培，向剑（2209）

基于水龄熵的矿井防尘供水管网可靠性研究………………………………………彭亚，蒋仲安，王佩（2221）

层状砂岩力学行为各向异性与破裂特征………………………储超群，吴顺川，张诗淮，郭沛，张敏（2232）

高温下复合材料桥梁防撞装置节段冲击及残余性能试验……………王璐，马文现，殷春详，刘伟庆（2247）

基于应力和时间双重影响下岩石蠕变模型研究………………………………………刘文博，张树光（2256）

钢筋混凝土在重盐渍土通电环境中基于Wiener随机过程可靠性分析……………………………………………………路承功，魏智强，乔宏霞，李刊，乔国斌，杨博（2266）

基于FWD动态弯沉盆的旧混凝土板共振碎石化基层沥青加铺结构模量反算………………………………………………………………………李盛，许路凯，马永波，程小亮（2277）

表面效应对碳纳米管中弯曲波波动特性的影响……………………………黄彬，武井祥，金花，周强（2289）

二维非测速条件下声发射震源定位方法数值验证……………吴顺川，张光，张诗淮，郭沛，储超群（2299）

考虑钢筋锈蚀的钢筋混凝土矩形梁恢复力模型研究………郑淏，郑山锁，贺金川，张艺欣，尚志刚（2312）

锈蚀钢框架梁抗震性能试验及地震损伤模型……尚志刚，郑山锁，张晓辉，郑淏，董晋琦，贺金川（2322）

矿井风网与采空区流场边界耦合模型与求解技术……………………………吴奉亮，高亚超，常心坦（2333）

多个列车轮载作用下铁路道床结构安定性分析…………………………王康宇，庄妍，张占荣，张升（2343）

盾构隧道开挖引起的邻近群桩竖向位移研究………………可文海，管凌霄，薛齐，徐长节，耿大新（2353）

化学溶液与冻融循环作用下粉砂岩强度衰减及预测模型……………王鲁男，尹晓萌，韩杰，王敬泽（2361）

第9期

磨矿粒度对磁铁矿磁性特征及磁团聚的影响…郭小飞，任伟杰，张洺睿，代淑娟，赵通林，朱巨建（2373）

萃取精馏与变压精馏分离甲醇/乙酸异丙酯工艺优化及节能……………………………………………………………杨金杯，黄辉，余美琼，林茂兹，颜福裕（2379）

姜黄素二聚体载药纳米粒的制备与性能研究……………文纳川，刘珍宝，杜沛芳，侯姣姣，刘艳飞（2389）

基于滑动分析法的黄河下游造床流量变化研究…来志强，赵连军，江恩慧，吴国英，张向，程家林（2396）

挤压比对Mg-Gd-Ni合金微观组织、力学及腐蚀性能的影响………万佳，刘楚明，许诗源，王必正（2405）

热处理对Al-5.12Mg合金组织与性能的影响……………………………………………钟叶清，林高用，徐彪，莫敏华，耿丽彦，王加强，颜飞（2413）

编织纤维金属层板成形性能及充液成形工艺分析…李磊，郎利辉，HAMZA Blala，王洪锋，曹兴龙（2422）

表面超声滚压加工对配气机构凸轮轴材料滚动接触疲劳性能的影响…………………………………………………马梦阳，李小强，赖福强，胡雄风，魏涛，屈盛官（2430）

基于尘粒启动特性的新型吸尘装置流场数值模拟及试验……………胡均平，张灵，史天亮，邱显焱（2442）

滑移装载机行走液压系统功率特性分析……………………陈晋市，霍东阳，刘思远，魏星，张志伟（2451）

熔融沉积成形制件表面粗糙度预测模型………胡伟岳，廖文和，刘婷婷，肖行志，顾明飞，李仕博（2460）

考虑柔轮杯体变形的谐波传动空间共轭齿廓设计与分析…………………………………………………朱飞鸿，杜雪松，宋朝省，朱才朝，杨勇，廖德林（2471）

异步对称双栅InGaZnO薄膜晶体管表面电势的解析模型……………………………………………何伊妮，邓联文，甄丽营，覃婷，廖聪维，罗衡，黄生祥（2480）

网压不对称工况下MMC桥臂能量优化控制…………………黄智，夏向阳，潘志敏，董巍，雷云飞，姜飞，张程麒，裴翔羽，张静，谢耀萱（2489）

基于三次样条插值函数的3D激光图像去噪算法研究………………………谭文，方淼，段峰，周博文（2496）

基于谱序列变换的高精度谐波参数估计算法……杨喜，汪旭明，陈炳权，张仁民，王向明，雷可君（2504）

珠海深厚淤泥地层中大直径桩插入比对基坑变形特性的影响………………………………………………陈晓庆，丁文其，曲红波，乔亚飞，逯兴邦，赖颂英（2514）

深埋隧道应变软化弹塑性解的强度准则效应………………………………………高永涛，梁鹏，周喻（2525）

拓宽箱梁连接段受力性能的对比试验研究…………………张丽芳，麻海燕，余红发，王莹，梅其泉（2538）

基于卷积神经网络的大地电磁反演…………………………………廖晓龙，张志厚，姚禹，路润琪，范祥泰，曹云勇，冯涛，石泽玉（2546）

跨活动断裂带城市浅埋地铁隧道结构两阶段设计方法研究……安韶，陶连金，边金，张宇，韩学川（2558）

交通荷载作用下粗粒土高路堤动力特性分析…………………………何忠明，邱俊筠，柯唯，范电华（2571）

淹没水射流清洗地浸采铀生产井的数值模拟与分析…………………程巍，雷洁珩，雷泽勇，李建华（2580）

机场挖填交界基础的强夯处治效果及参数分析…………………………………………马德青，沈宇鹏，朱志龙，胡惠华，王树华，石天奇，张鹏（2587）

进气道喷水对增压直喷汽油机性能的影响………………………彭忠，秦静，裴毅强，张启锐，宋东先，崔亚彬，左坤峰，袁中营，吴慎超（2595）

增压直喷汽油机各缸燃烧不均匀性试验研究………………鲍欢欢，付建勤，刘琦，段雄波，刘敬平（2604）

褐煤低温氧化分子结构单元变化特性…………姬玉成，张英华，黄志安，邵振鲁，高玉坤，肖善林（2614）

不同车轮型面对地铁道岔区轮轨静态接触行为的影响………………………………………………………陈嵘，丁晔，陈嘉胤，王雪彤，徐井芒，王平（2624）

涡流发生器布置位置对小型垂直轴风力机气动性能的影响………………………张立军，朱怀宝，胡阔亮，顾嘉伟，缪俊杰，江奕佳，李想，于洪栋，刘静（2634）

驼峰区内混流式喷水推进泵失速状态判别研究……………李恩达，李伟，施卫东，马凌凌，杨震宇（2643）

城际动车组车轮I类滚动接触疲劳机理研究…………………蔡宇天，赵鑫，陈佳明，刘永锋，温泽峰（2653）

地铁列车行驶速度对火灾烟气温度特性的影响…………………马砺，刘尚明，魏高明，范晶，高宇（2663）

客运列车曲线超速引起的脱轨全过程计算…………………………………龚凯，刘林芽，向俊，罗锟（2673）

第10期

辽宁朝阳地区某钒钛磁铁矿中铁精矿的工艺矿物学研究…………陈汪兴，梁海军，高子先，薛向欣（2681）

振动筛仿真研究、应用现状及发展趋势………………………夏绪辉，荆为民，张泽琳，王蕾，张欢（2689）

高硫铝土矿微波焙烧脱除黄铁矿硫………………金会心，吴复忠，李军旗，陈朝轶，刘虹伶，杨黔（2707）

刀刃结构对镍合金切削过程影响的数值模拟………………………李松青，殷晓龙，邹银辉，邓文君（2719）

TBM滚刀刀圈材料合金成分对组织和耐磨性能的影响……贾连辉，尚勇，龙伟民，夏毅敏，薛广记（2730）

基于压电纤维传感器Lamb波方向检测的裂纹识别方法……王送来，吴万荣，沈意平，韩斌，唐斌龙（2739）

基于滑模干扰观测器的机械臂终端滑模控制……………………………………韩俊庆，吴爱国，董娜（2749）

含支链闭环的结构冗余平面并联机构静力学分析……………………曲海波，胡榄庆，郭盛，李书杰（2758）

板带轧机通用变凸度板形控制技术………………曹建国，黄小海，赵秋芳，熊海涛，王涛，张兆祥（2772）

板形和张力对铝箔卷取过程横向屈曲的影响……………于海军，何安瑞，陈长科，王修亮，左小刚（2782）

TBM盘形滚刀切削力学模型分析………………………………………………张桂菊，谭青，劳同炳（2792）

一种变工作空间并联机构的设计及应用……………………………………………………李典，郭盛（2800）

液驱并联机构多维力加载系统CMAC-模糊PID控制……………………………………………………赵劲松，王春发，徐嘉祥，董杰，孙鑫宇，赵子宁（2811）

五自由度混联3D打印机设计与运动学分析……………………………张俊，池长城，汤腾飞，方汉良（2822）

基于辊系多模态模式的连轧机机架间耦合振动系统模型的建立及仿真分析…………………………………………………………………………王桥医，崔明超，王瀚，过山（2834）

含弯头管道超声导波检测………………………………………朱龙翔，赵时，王悦民，张海兵，段刚（2844）

一种基于PSO-CSP-SVM的运动想象脑电信号特征提取及分类算法…刘宝，蔡梦迪，薄迎春，张欣（2855）

一种基于Volterra频域核的非线性频谱智能表征方法………………陈乐瑞，曹建福，胡河宇，王晓琪（2867）

有色金属矿区土壤铬污染遥感反演研究………………………陈宇波，薛云，邹滨，文益民，周松林（2876）

基于一种新Lyapunov泛函方法的时滞复杂动态网络同步采样控制……………陈刚，李佳，肖伸平（2885）

复杂荷载作用下高速铁路沥青混凝土层受力及开裂特性研究……………………吕宋，肖宏，张智海（2893）

基于树根桩地基加固法的井塔纠偏方案…………………………………………曹明星，高永涛，周喻（2906）

圆盘节理模型的量化评价与优化方法…………………………………刘铁新，郑俊，刘爱娟，郑洪春（2917）

一种弯剪型软钢阻尼器的力学性能……………………………王威，王万志，梁宇建，向照兴，韩斌（2925）

煤体应力对钻进切削力的影响…………………………………………赵志刚，邱东卫，杨坤，郑雅华（2941）

非线性强度准则下抗滑桩加固边坡稳定性极限平衡分析………罗伟，徐长节，荣耀，陈磊，戴程琳（2950）

直流电场对不同初始压力球形膨胀火焰的影响………………………………………卢矍然，高忠权（2959）

规划阶段建筑冷热负荷预测与特性分析………………朱丽，张吉强，王飞雪，孙勇，田玮，朱传琪（2969）

剪力铰对地铁列车-劣化浮置板轨道振动的影响………………蒋吉清，张佳斌，董北北，魏纲，廖娟（2978）

基于管状导体模型钢轨内阻抗计算………………………………………张友鹏，王东，赵斌，赵珊鹏（2988）

第11期

母合金法MIM418涡轮的近终成形与致密化机理………………………陈晓玮，刘烨，章林，曲选辉（2999）

C/N物质的量比和金属碳化物对TiCN-Ni合金体系润湿行为的影响………………………………………………张立，肖桥平，刘涛，凌群，罗国凯，吴厚平，崔焱茗（3007）

粉末增材制造微结构的非等温相场模拟………………………………………杨阳祎玮，易敏，胥柏香（3019）

反应熔渗法制备耐烧蚀陶瓷改性C/C复合材料的研究进展………侯旭初，郝振华，舒永春，何季麟（3032）

金属陶瓷结合剂WC硬质合金研究进展与展望………………………邹芹，张萌蕾，李艳国，王明智（3044）

送粉式激光增材制造Al-Mg-Sc-Zr合金的微观组织与力学性能………………………………………………林泽桓，李瑞迪，祝弘滨，袁铁锤，徐荣，闫华，叶兵（3055）

润滑相粒度对Ag-WS2复合材料摩擦磨损行为的影响………………李云，孙阳，康潇，张雷，周科朝（3064）

高导热低膨胀石墨/Cu-Zr复合材料组织与性能…………陈存广，崔倩月，余程巍，郝俊杰，郭志猛（3072）

激光送粉增材制造Fe-Mn-Si基形状记忆合金组织与性能……………姚聪，李瑞迪，袁铁锤，牛朋达（3081）

选区激光熔化AlSi10Mg合金镜的表面性能…………………………………韩潇，康楠，焦建超，王超（3088）

微米级三维多孔高纯铝材料的制备与特性研究…………………………………………张茂贵，王君，汤水，贾明，刘芳洋，蒋良兴，艾亮，艾燕（3093）

粉末冶金镁合金中第二相的扩散行为……………孙佳星，程开明，李培亮，刘聪，李冠宇，周吉学（3101）

CuAlMn合金粉末激光选区熔化成形组织与性能研究…………………熊熠，郑聃，袁铁锤，李瑞迪（3110）

PZT陶瓷冷烧结工艺的优化与压电性能研究…………………………………郭茹，马玉鹏，张妍，ROSCOW James，BOWEN R.Chris，张斗（3119）

凝胶注模成型氧化锆陶瓷盖板工艺研究…李奔可，陈茵芝，李小兰，王晨扬，黄国基，谢睿，王小峰（3128）

取向多孔钛酸钡基陶瓷的介电与压电性能……………………………鲍寅祥，张妍，周科朝，黄伯云（3136）

银基纳米自润滑复合材料的润滑膜演变行为……………………张强，张可墨，周元子，曲强，康潇（3144）

银基复合材料真空电接触特性…………………………………周元子，李利，朱林林，张可墨，张强（3152）

在线加热轧制Mg-6Al-1Sn-Mn板材显微组织及力学性能……刘强，宋江凤，赵华，肖毕权，潘复生（3159）

金属透射样品的制备和高分辨表征……………………白红日，汪浩，梁鎏凝，刘烨，沈希，温玉仁（3169）

Zr和Cr掺杂TiAlN涂层结构、力学和高温性能研究……………………刘慧君，胡春，刘喆人，陈利（3178）

NiCrAlY涂层与镍基单晶高温合金基体的互扩散行为…………………………………邓鹏，荔琴，刘英坤，尹斌，石倩，张利军，杨焜，邓春明，李风（3187）

金属基仿生贝壳材料的制备方法……………………………………杨森，靳丽，董杰，王锋华，董帅（3199）

尖晶石LiMn2O4纳米棒的合成和储锂性能………………………………………周钢，陈月皎，范洪波（3211）

SiC复合材料的研究进展与展望…………………………………………邹芹，周鑫，李艳国，王明智（3220）

ZnO修饰的3D生物质多孔碳用于锂金属电池负极的性能………龚亮，张铎，江晨浩，沈康，唐谊平（3233）

PVDF基BT/PMN-PT双组分复合薄膜的储能性能……………刘欢，张硕，许新刚，林秀娟，黄世峰（3242）

基于精轧平坦度优先的凸度分配策略…………………………………刘东冶，何安瑞，邵健，陈超超（3253）

第12期

废旧锂离子电池的湿法回收研究进展……………杨健，秦吉涛，李芳成，蒋良兴，赖延清，刘芳洋，贾明（3261）

废旧光伏组件回收技术研究进展……………………………………周哲，孙凯文，蒋良兴，贾明，刘芳洋（3279）

月球表面矿产资源原位利用研究进展………………………………李琛，魏奎先，李阳，马文会，赵斯哲（3289）

基于密度泛函理论的KF-NaF-AlF3低温电解质体系势参数拟合及分子动力学模拟……………………………………………………………………………王景坤，国辉，张红亮，李劼（3300）

锌氧压酸浸渣赋存特性与浸出毒性评价………………陈永明，代杰，胡方园，李云，常聪，向长柳，何静（3309）

铝电解PFCs生成过程：F在炭阳极上吸附实验与第一性原理研究……………孙珂娜，张红亮，王景坤（3321）

铝电解阴极燕尾槽内炭块-糊料-钢棒界面接触状态仿真优化……………吕晓军，孙启东，陈昌，李劼（3331）

电子特气六氯乙硅烷产品金属杂质检测方法……………万烨，肖劲，严大洲，张园园，仲奇凡，刘芳洋（3341）

牛磺酸对锡电解精炼过程的影响……钟晓聪，张斌，林振聪，李金辉，刘志强，路永锁，王瑞祥，徐志峰（3349）

反三明治结构复合多孔Pb合金阳极数值仿真……………………………黎红兵，杨健，蒋良兴，张红亮（3357）

废旧三元锂离子电池正极还原焙烧回收Li的研究……严康，熊正阳，刘志楼，徐志峰，王瑞祥，聂华平（3367）

粗骨料膏体低温流变性能及回归模型…………………尹升华，刘家明，陈威，邵亚建，吴立波，王筱添（3379）

熊去氧胆酸小檗红碱酯的制备……………………………龙硕，刘珍宝，彭东明，刘晓钦，蒋婷，刘艳飞（3389）

基于三质点模型的仿人机器人节能步行…………………………………何杰，张晓晖，肖晓晖，丁加涛（3396）

液驱并联机构多维力加载系统滑模解耦控制…………赵劲松，孙鑫宇，董杰，王春发，徐嘉祥，王志鹏（3407）

基于多特征权重模糊聚类的高考志愿推荐算法……………………………………余奎锋，段桂华，时翔（3418）

湘中及周缘奥陶纪岩相古地理演化与原型盆地研究……谭慧，秦明阳，李杰，郭建华，吴诗情，边瑞康（3430）

一种时空阵列电磁数据处理模型………………………………………周聪，汤井田，原源，兰学毅，郭冬（3444）

考虑滑脱效应与迂曲度分布特征的页岩复杂裂缝网络渗透率模型………………………王付勇，程辉（3454）

连续档架空线路动态风偏的多刚体模型……………………………………………胡鑫，王璋奇，杨文刚（3465）

不同开裂状态下预应力混凝土连续箱梁受力性能评估试验研究………………李克忠，曹国辉，杨李根（3475）

干湿循环作用下基于Laplace分布的裂土应变硬化损伤模型………………周峙，张家铭，宁伏龙，罗易（3484）

冻融作用下不同饱和度红砂岩损伤力学特性…………宋勇军，车永新，陈佳星，任建喜，毕冉，陈少杰（3493）

细粒土空间不均匀分布对水分迁移的影响……于钱米，邰博文，牛吉强，汪国达，刘振华，冯雁，马争锋（3503）

盾构下穿既有地铁隧道环向围压及受力变化……………………魏纲，齐永洁，吴华君，华鑫欣，张苑竹（3515）

基于可及处理区域的溶液除湿循环热力完善度分析…………………………陈博闻，殷勇高，程小松（3528）

轨道间隙对磁浮列车气动性能的影响……………………………………………………孟石，周丹，孟爽（3537）

基于风洞试验和CFD仿真的350 km/h高速铁路飞砟研究………………井国庆，杜文博，丁东，汲生成（3546）

基于数值试验的风沙区散体道床内尺度比研究………………………………………张智海，肖宏，令行（3554）

基于不等波长模型的II型轨道板上拱稳定性公式……………………杨俊斌，张光明，杨荣山，刘学毅（3566）

基于因果关联的交通拥堵传播分析…………………………………………陈美林，郑治豪，郭宝，王璞（3575）

2020年第51卷卷终

Journal of Central South University(Science and Technology)General Contents(2020)

No.1

Role and mechanism of oxidizer in flotation separation of galena and sphalerite using locust bean gum as depressant…………FENG Bo,GUO Yutao,WANG Tao,PENG Jinxiu,ZHANG Liangzhu,ZHONG Chunhui,WANG Huihui(1)

Effects of ammonium sulfate/sulfuric acid system on Al2O3extraction of different fly ashes……………………XIN Haixia,XU Yujun,CUI Fuhui,WU Yan,LIN Jie,REN Hang,MU Wenning,ZHAI Yuchun(8)

Preparation of steel fiber reinforced high strength lightweight concrete using vibration mixing technology……………………………………LUO Wei,XIONG Guangqi,XIONG Chenchen,ZHENG Yalin,WANG Chong(14)

Effect of strain strengthening on fatigue behavior of 022Cr17Ni12Mo2 stainless steel…………………………………………GAO Yi,PENG Jian,DAI Qiao,XUE Zhichao,WANG Ying,LI Kaishang(23)

General modeling method of spiral bevel gear based on universal motion parameters…………………………………………………………………………………TANG Yi,HE Yuhui,TANG Jinyuan(33)

Position and posture detection method of shield segments using line laser sensors………………GAO Xiang,TAO Jianfeng,WANG Mingdou,LIU Chengliang,YANG Zheng,ZHUANG Qianwei(41)

Contact mechanics of two-tooth-difference oscillating-disc movable teeth transmission…………………………………………………………………………HE Yabo,LIANG Shangming,YANG Yong(49)

Comparison and analysis of in-cylinder RGF detection methods for gasoline engines based on coupled approach of experiment and numerical simulation…………LIAO Cheng,LIU Jingping,REN Chengqin,LIU Qi,LI Qingyu(59)

Prediction of mechanical properties of cold rolled products based on maximal information coefficient attribute selection……………………………………………………………………………………YAN Yifan,AN Luda,LÜ Zhimin(68)

Early fault diagnosis method of rolling bearing based on nonlocal mean denoising and fast spectral correlation………………………………………………………………………………………………WAN Shuting,PENG Bo(76)

Optimized model predictive control strategy of modular multilevel converter……HUANG Zhi,XIA Xiangyang,ZHAO Xinxin,LIU Yuan,SHI Chao,CHEN Yangyi,XIAO Zhiyu,CAO Bailin(86)

Effect of rolling parameters on microhardness of cross-wedge rolling of 42CrMo/Q235 laminated shaft composite interface……………………………………………………ZHNG Xiao,PENG Wenfei,SHU Xuedao,WU Zhijun(94)

Improved whale optimization algorithm and its applicationin sintering blending process………………………………………………WU Tiebin,ZHU Hongqiu,LONG Wen,LI Yonggang,LIU Yunlian(103)

Geological"sweet spots"log evaluation of conglomerate tight reservoir of Baikouquan formation in Fengnan 4 play,Mahu Sag,Junggar Basin………………………JIAO Chenxue,WANG Min,GAO Yang,HUANG Wenbiao,LU Shuangfang,GUAN Ying,QIAN Genbao,QIN Jianhua,ZHOU Nengwu,TIAN Weichao,WANG Zhixuan,XU Jianpeng(112)

Structure and hydraulic characteristics of municipal solid waste based on CT scanning…………………………………………………………………………MENG Meng,QIN Rui,LUO Peng,KE Han(126)

Upper bound punching failure analysis of circular foundation overlying a cave in Karst area based on the Hoek-Brown failure criterion……………………………………………LI Liang,ZENG Zhonglin,WANG Zhibin,LI Taoyu(134)

Mechanical analysis model for double layered pre-supportin tunnel…………………ZHAO Chenyang,CAO Haorong,PENG Limin,SHI Chenghua,LEI Mingfeng,YANG Weichao(145)

Deformation characteristics of double-line ballastless track subgrade under water immersion of expansive rock foundation…………………………………………DUAN Junyi,YANG Guolin,LIU Yang,KAN Jingliang,QIU Mingming(156)

Fatigue test study of combined cable-girder anchorage structure in cable-stayed bridge with steel truss girder………………………………………………………………………CAO Shanshan,LEI Junqing,HUANG Zuwei(165)

Characterization of coarse aggregate filling slurry based on vertical distribution of mass fraction…………………………………………………………………………………LI Litao,CHEN Dexin,GAO Qian(176)

Experimental study on atomization characteristics and dust reduction capacity of gas-water nozzles in metal mines…………………………………………………………………………JIANG Zhongan,WANG Yapeng,XU Feng(184)

Experimental study on physico-mechanical properties of granite after high temperature………………………WU Yangchun,XI Baoping,WANG Lei,NIU Xinming,WANG Shuai,ZHAO Yangsheng(193)

Experimental study on standard specimen for measuring compressive strength of earth block masonry………………………………………………………LAN Guanqi,WANG Yihong,JIANG Ziteng,WANG Tianya(204)

Influence of damage of stay cables on system reliability ofin-service cable-stayed bridges…………………………………………………………………………………………YAN Donghuang,GUO Xin(213)

Prediction model of photovoltaic power generation based ontime-frequency entropy and neural network…………………………………………………………………………………………SUN Zhiqiang,LI Dongyang(221)

Rule of droplets growth in the early stage of frost formation on superhydrophobic surfaces………………………………………………………ZHAO Wei,LIANG Caihua,CHENG Saifeng,LUO Qianni(231)

Pressure and temperature characteristics of flame propagation of gas explosion in pipeline…………………………WANG Qiuhong,WANG Erfei,CHEN Xiaokun,JIANG Juncheng,ZHANG Mingguang(239)

3D-temperature field and its effect of inverted Y-shaped concrete pylon in lower Yangtze region…………………………………………………………………………GU Bin,XIE Fuzhe,QIAN Hai,LEI Liheng(248)

Catalytic performance of CeO2-MnOx/CF for oxidation of toluene…………WANG Yuling,SONG Min,MENG Fanyue(261)

Effect of different preparation methods on simultaneous removal of gaseous CO and Hg0over Cu-Co/ACN………………………………………………………TANG Xiaolong,WANG Yuhe,YI Honghong,GAO Fengyu(269)

No.2

Influence of grinding aids on grinding kinetics of oxidized iron ore………………………………………………………XIE Dongdong,HOU Ying,GAI Zhuang,HUANG Guichen,QI Shuangfei,XU Donglin,HAN Cheng,CHEN Laibao,ZHU Jujian(279)

Numerical simulation on qualification process of self-jointing wall electric furnace…SONG Rui,SU Fuyong,WEN Zhi(287)

Preparation of high purity spherical ruthenium powder based on homogeneous precipitation method……………………PEI Hongying,ZHAO Jiachun,WU Yuedong,BAO Simin,YANG Haiqiong,DONG Haigang(294)

Analysis of fracture toughness and microstructure of Al-Zn-Mg-Cu alloy in overaged condition…………………………………………………………………………LIN Lianghua,LIU Zhiyi,HAN Xiangnan(301)

Effect of Cu mass fraction on microstructures and properties of Al-1.0Mg-1.0Si-0.6Mn alloys………………………………………………………LIU Mingxin,DENG Yunlai,ZHANG Zhen,TANG Jianguo(309)

Analysis of dynamic characteristics of TBM space pipeline…SUN Wenqian,ZHANG Huailiang,QU Wei,XIONG Yu(319)

Influence pattern of TBM cutter arrangement on cutterhead overturning moment……………………………………………………JI Zhiyong,XIA Yimin,LAN Hao,YANG Mei,LIN Laikuang(327)

Simulation of electro-hydraulic system for train brake based on pressure control of high frequency solenoid valve…………………………………………LI Wenjing,GONG Guofang,LIU Jian,ZHANG Yakun,YANG Huayong(340)

Chatter and cutting forces analysis in machining of titanium alloy TB6 with vibration-free milling cutters…………………………………………………………………………LIU Jianyong,QIAO Lihong,CHEN Wuyi(349)

Factors influencing measurement of bolt stress based on acoustoelastic effect………………………………………………HAN Yuqiang,WU Fugang,LI Minghai,MEI Jun,WANG Xiaolong(359)

Influence of contamination on accuracy of hot film gas flow sensor…………………………………………………………………YUAN Changrong,SUN Zhongsheng,LI Xiaoning(367)

Robust face recognition based on collaborative representation of multi-directional Gabor feature maps…………………………………………………………ZHANG Pei,XU Wangming,WU Shiqian,JIN Xiaoyuan(377)

Differences and significance of shale gas accumulation incomplex geological condition area:a case of Paleozoic in northwestern Hunan…………………LI Zhiwen,GUO Jianhua,QIN Mingyang,HUANG Yanran,CAO Zheng(385)

Test verification and modification of Mohr-Coulomb criterion………………………………………CAO Yihui,LI You(399)

Experimental study on evolution of microscopic contact area in saturated soft soil during shear process with drainage…………………………………………………………………XU Riqing,JIANG Jiaqi,DONG Mei,XU Liyang(411)

Influence of boundary conditions on the thermal stability of expressway constructed with an integral and two separated embankments in permafrost zones……………………………LI Xiaolin,MA Wei,MU Yanhu,NIU Yonghong,HUANG Yongting,CHAI Mingtang(420)

Prediction of soil movement and settlement of excavated surface soil of variable section tunnel……………………………………………………………………………LI Tao,WANG Yibo,YU Zhiwei,LIU Bo(433)

Safety thickness of bauxite goaf protective roof in hard clay roof…………………………JIANG Lichun,YANG Chao(445)

Stability analysis of support structure based on HOEK-BROWN strain-softening model……SU Yonghua,ZOU Yuheng(453)

Mechanical property of channel steel tube slab composite beams for underground space……………………………………………………ZHANG Chaozhe,ZHAO Wen,JIA Pengjiao,HAN Jianyong,LI Shengang,BAI Qian,CHENG Cheng,CHEN Yang(464)

Influence rule of early compressive strength and solidification mechanism of full tailings paste with coarse aggregate……………YIN Shenghua,LIU Jiaming,SHAO Yajian,ZHANG Haisheng,ARMELLE Belibi,KOU Yongyuan(478)

Effect of gypsum-clinker mass ratios on properties of slag filling cementitious material and its application…………………………………………………………………………LI Litao,GAO Qian,CHEN Dexin,WU Fan(489)

Experimental study on load amplitude impact on dynamic response of XCC pile-raft composite foundation……………………………………………………SUN Guangchao,KONG Gangqiang,LIU Hanlong,CHU Jian(499)

Influence of tunnel blasting vibration on secondary lining ofnew ultra short age concrete………HE Yongchao,CHEN Qiunan,YI Liwei,HUANG Xiangtao,ZENG Ao,ZHOU Xiangshi,ZHOU Guangyu(507)

Simplified calculation method of thermal response radius of energy pile in its whole life cycle…………………………WANG Zhe,LIU Yejun,ZHANG Zhengwei,WENG Kaiwen,ZHENG Xiuling,XU Sifa(514)

Temporal semi-analytical method for water flow and heat transfer in fractured rocks……………………………………………………………………………………LIU Dongdong,XIANG Yanyong(523)

Effect of super-hydrophobic surface adhesion on condensation heat transfer……………………………………………ZHOU Ruhong,JI Xianbing,KONG Qingpan,GUO Hao,XU Jinliang(532)

Influence of vortex generator on aerodynamic performance of airfoil of the vertical axis wind turbine…………………………………………………………ZHANG Lijun,ZHU Huaibao,GU Jiawei,MA Dongchen,MI Yuxia,YU Hongdong,LIU Jing,MIAO Junjie,LI Xiang(540)

DEM analysis of effect of ballast fouling on dynamic characteristic of ballast bed……………………………………………………………………………CUI Xuhao,XIAO Hong,XIAO Huijuan(551)

A railway track detection method using LiDAR…………………………………GUO Ziming,CAI Baigen,JIANG Wei(560)

No.3

Chromite removal process from low-grade laterite nickel ore by classification and gravity-magnetic combined separation technology………XU Pengyun,FANG Hao,CHEN Zhou,LIU Bo,JIANG Zhenkang,GUO Xueyi,XU Kaihua(567)

Lithium removal from sodium aluminate solution and its reaction mechanism……………………………TANG Wenqi,PENG Zhihong,LIU Guihua,ZHOU Qiusheng,QI Tiangui,LI Xiaobin(579)

Simulation on multi-process operation in steelmaking-continuous casting process based on"furnace-caster matching"……………………YANG Jianping,HONG Yujie,LIU Qian,WANG Bailin,GAO Shan,GUO Weida,LIU Qing(587)

Fabrication of TiO2/Sb-doped tin oxide composite by tartaric acid-assisted homogeneous precipitation method……………………………WANG Yanan,MA Kunyi,WANG Jiashuang,QIAN Jianhua,XING Jinjuan,LIU Lin(600)

Thermal deformation strain compensation constitutive equation for Q1100 steel for construction machinery………………………………………………LI Hongying,ZHAO Fei,LIU Dan,ZHANG Qingxue,NI Chuanhao(608)

Performance analysis of strain sensor based on graphene composite film…WEI Jun,WU Zhiqiang,DONG Rongzhen(619)

Mesoscopic characteristic of voids in CFRP composites fabricated with unidirectional and woven prepreg……………………………………………………………………………SHI Junwei,XUN Guoli,LIU Songping(628)

Dynamic analysis of deep sea mining system in obstacleavoidance mode………………………………………………………………………XU Hailiang,PENG Neng,YANG Fangqiong(641)

Establishment and application of comprehensive evaluation method for automobile technical performance……………OUYANG Hongwu,XIAO Yemeng,HU Shicheng,TANG Xin,LEI Gang,BLUMENFELD Raphael(650)

SVR-fuzzy-PID strategy of AC electrical dynamometer……………………………………………ZHONG Dingqing,WANG Ailun,HE Qian,WEI Kexiang,TANG Yong(661)

Friction compensation of electromechanical servo systems based on integrator leakage……………………………………PIAO Minnan,WANG Kelei,SUN Mingwei,HUANG Jian,CHEN Zengqiang(668)

Dynamic modeling of redundant parallel mechanism considering drive friction………………………………………LU Chao,QIN Wei,HU Xiaoliang,TANG Xiaobin,LIU Fei,XIE Zhijiang(678)

Multi-parameter coupled chatter model and its engineering application of tandem rolling mill based on dynamic roll gap………………………………………………………WANG Qiaoyi,ZHANG Qiubo,WANG Han,CUI Mingchao(687)

Optimization of load distribution strategy for CSP production line………………………………………………………CHEN Xiaorui,ZHANG Dianhua,MA Jianyang,PENG Wen(697)

Spectral efficient resource management algorithm for energy harvesting-based D2D heterogeneous network…………………………………………………………………ZHAO Jiahao,KUANG Zhufang,DENG Xiaoheng(704)

Study on tunnel under-over break detection method based on three-dimensional image reconstruction technology…………………………YANG Junsheng,ZHANG Yu,ZHU Zhiheng,FU Jinyang,XIE Zhuang,WANG Lichuan(714)

Crack propagation law of brittle rock mass undercyclic loading and unloading……………ZHOU Xiang,LI Jiangteng(724)

Experimental research on excess pore pressure in aquitard at bottom of foundation pit due to fluctuation of confined water……………………………………………………………YING Hongwei,WANG Di,XU Dingye,ZHANG Lisha(732)

Test study on hysteretic behavior for a new type of force limiting device………………HU Zhenqing,DENG Changgen(739)

Deformation law and control limit of shield tunnel cross-section under eccentric surcharge load………………………………………………………WEI Gang,HONG Wenqiang,WEI Xinjiang,JIANG Jiqing(750)

Environmental error correction of 3D laser detection for goaf based on BP neural network………………………………………………………………HOU Pengyuan,XU Shuai,LIANG Ruiyu,JI Xiaofei(758)

Multifactor progressive regression analysis on frost heave characteristics of well-graded gravel……………………………………………………WU Peng,LUO Qiang,YU Hao,LIU Mengshi,WANG Tengfei(767)

Strength mechanics model of filling body based on Coulomb tribology principle……………………………………………………CHANG Baomeng,DU Cuifeng,WEI Dingyi,ZHANG Aiqing(777)

Experimental research on elastic modulus evolution of chlorite phyllite under cyclic loading…………………………………………………………………………ZHOU Yang,SU Shengrui,MA Hongsheng(783)

Seismic tests and bearing capacity calculation of self-insulating structural wall with inner skeleton with windows………………………………LIU Kang,YUE Yibo,WANG Shaojie,LIU Fusheng,ZHOU Man,SUN Hongwei(793)

Influence of injection strategies on combustion and performance of turbocharged gasoline direct ignition engine…………………………LI Yangyang,DUAN Xiongbo,LIU Jingping,TAN Yonghao,XIE Yunkun,LUO Baojun(805)

Simulation study on spray characteristics of nano-fuel containing dilute-phase particles……………………………………………CAI Weiyi,MEI Deqing,LIU Zheng,ZHAO Xiaodong,YUAN Yinnan(816)

Influence of rail gauge on wheel-rail contact behavior of metro line………………………………………CHEN Rong,WEN Jing,YU Hao,AN Boyang,XU Jingmang,WANG Ping(824)

Track strengthening measures assessment of heavy haul railway based on freight train anti-derailment safety degree…………………………………………………………………………………GONG Kai,XIANG Jun,LIU linya(832)

Modeling of idle speed transmission based on unit modeling method and performance comparison of various torsional dampers………………………………………………………………CHEN Long,SHI Wenku,CHEN Zhiyong(842)

Vibration reduction method of multiple passive vibration absorbers for vehicle body in full speed range……………………………………………………………WEN Yongpeng,ZONG Zhixiang,WENG Lin,ZOU Yu(853)

No.4

Normal temperature oxidation simulation of sulfide ores and prediction of oxidation activity with neural network…………………LIU Zhengzhou,PAN Wei,WU Aixiang,WU Chao,DENG Duo,FENG Yanxi,YANG Fenglong(863)

Industrial experimental research and temperature distribution in aluminum reduction cell……………………………………………SUN Shuaigeng,LI Mao,CHENG Benjun,LI Hesong,HOU Wenyuan(872)

Preparation of Ni(Mn,Cu)Fe mixed metal oxides from LDH precursors and application in low-temperature NH3-SCR………………………………………………………CI Chao,DU Yali,YANG Baoshuan,ZOU Chunlei,WU Xu(882)

Effects of defected carbon nanotubes on the elastic properties of polymethyl methacrylate matrix………………………………………LI Yunlong,YANG Bin,TANG Liming,LI Hao,WANG Zhaozhi,LIU Dong(893)

Size-dependent bending behaviors of orthotropic function allygraded microplates……………………………………………………………KANG Zetian,ZHANG Yan,ZHOU Bo,XUE Shifeng(902)

Synergistic effect of talc on flame retardancy and smoke suppression properties of transparent intumescent fire-retardant coatings…………………………………………………XU Zhisheng,XIE Xiaojiang,YAN Long,ZHOU Huan(912)

Comparative analysis of the effectiveness of powder materials on suppressing aluminum dust cloud explosion…………………………………………………………………WANG Qiuhong,SHEN Zhongyi,WANG Qingfeng(922)

Aerodynamic performance on the trailing edge split flap and regulation law of deflection angle of VAWT…………………………………………………………ZHANG Lijun,GU Jiawei,ZHU Huaibao,HU Kuoliang,JIANG Yijia,MIAO Junjie,WANG Hanxiang,LIU Jing(931)

Walking gaits planning with variable footstep length of biped robot based on variable center-of-mass height……………………………………………………………………………………ZHOU Jiangchen,XIAO Xiaohui(944)

Fatigue life predication model for cracked beam structure based on finite element method…………………………………………………………………………………LONG Hui,LIU Yilun,LI Songbai(953)

Optimization of arc extinguishing capability of UHV self-energy arc chamber……………………………………………LI Qiaoquan,WU Shijing,LI Xiaofeng,LI Xiaoyong,ZHAO Wenqiang(962)

Windage losses analysis of GTF engine fan drive gearbox planetary gear based on CFD…………………………………………………………BAO Heyun,WANG Chunlei,LU Fengxia,ZHU Rupeng(971)

Finite-time sliding mode control for vertical recoveryof the first-stage of reusable rocket…………………………………………………………………LI Xiaodong,LIAO Yuxin,LIAO Jun,LUO Shibin(979)

Research on high-voltage cable sheath faults identification based on Lissajous figure and relation analysis…………………ZHAO Wei,XIA Xiangyang,LI Mingde,PAN Zhimin,LEI Yunfei,LIU Weidong,ZHANG Jing(989)

Characteristics of reservoir variability of transitional and continental shale,Shanxi Formation,Linxing and Shenfu area,Northeastern Ordos Basin…………………………XUE Chunqi,WU Jianguang,ZHONG Jianhua,LIU Quyang,ZHANG Shouren,HOU Mengxiang,LI Fengtian,PENG Chaofeng(998)

Design method and application of horizontal bottom sealing curtains for deep foundation pits excavated in deep aquifers with high permeability…………………CAO Chengyong,SHI Chenghua,PENG Limin,JIANG Shenggang,LIU Shengli,LIU Jianwen(1012)

Interaction law and mechanical characteristics between pipe and soil during frost heaving……………………………HUANG Long,SHENG Yu,WU Jichun,HUANG Xubin,HE Binbin,ZHANG Xiyan(1022)

Evolution law of cracks based on full-scale model test of slope…………………ZHANG Jiaming,LUO Yi,ZHOU Zhi,CHIKHOTKIN Victor,YUAN Chao,WANG Shaofeng(1037)

Theoretical calculation of frost heaving pressure in tunnel surrounding rock during freeze-thaw cycles…………………………………………………………………………………………LIU Hongyan,ZHAO Yuxia(1049)

Air distribution and influencing factors at unloading port in multiple level of high ore pass…………………………………………………………………WANG Jiuzhu,JIANG Zhong′an,WANG Yapeng(1059)

Instability mechanism and reinforcement method of vertical shaft…LI Kang,GAO Yongtao,ZHOU Yu,LI Jianwang(1068)

Freeze-thaw experiment of saline soil for U-shaped channel foundation…………………………………………LI Hongbo,TIAN Juncang,YU Guangyun,YAN Pengfei,YIN Jianguang(1077)

Flexural behavior of reinforced concrete slabs strengthened with BFRP grids and PCM……………………………………………DING Lining,HE Weidong,WANG Xin,CHENG Fang,WU Zhishen(1085)

Numerical analysis on axial compression behavior of tenon connection for prefabricated RC columns……………………………………………ZHANG Shijiang,GUO Zixiong,LIU Yang,YE Yong,LIU Xiaojuan(1097)

Wind-induced torsional response of UHV long cantilever transmission tower……………………………………………………ZHANG Qian,YE Zhen,CAI Jianguo,YU Liang,FENG Jian(1108)

Study on mechanical properties and mesoscopic simulation of coarse-grained soil subgrade……………………………………………HE Zhongming,HUANG Chao,LIU Yaxin,FAN Dianhua,YANG Yu(1116)

Structural optimization simulation of collector/evaporator for hybrid heat source heat pump…………………………………………………………………………FANG Lei,LI Shuhong,XU Chengcheng(1125)

Thermal migration characteristics of coal fire area based on fire prevention technology with heat pipe…………………………………………………………………LI Bei,GAO Wei,DENG Jun,BI Mingshu,MA Li(1135)

Influence of the creep curve on the wheel-rail contact characteristics in small radius curve of metro………………………………WANG Ping,GUO Qiang,LI Chenzhong,CHEN Jiayin,XU Jingmang,QIAN Yao(1145)

Influence of fastener failure on dynamic performance of metro monolithic track system………………………………WEI Gang,DONG Beibei,JIANG Jiqing,SU Xinjie,WANG Lizhong,DING Zhi(1154)

No.5

Desulfurization and digestion performance of low grade high-sulfur bauxite by static roasting………………………………………………………………WU Hongfei,XIA Feilong,LI Junqi,CHEN Chaoyi(1163)

Aperture adjustment of mesoporous ZSM-5 based on fly ash for catalysis of pentanal in cooking fumes………………………LI Jian,SHI Yingjie,FU Xiaoheng,ZHANG Fan,HUANG Jiayu,LIU Yanli,ZHU Jinwei(1174)

Durability and its relation with pore structure and hydration degree of concrete with ferronickel slag powder………………………………………………WANG Shen,LI Baoliang,PAN Ziyun,SUN Chao,ZHANG Yamei(1189)

Free vibration behaviors of orthotropic functionally graded microplates……………………………………………………………KANG Zetian,ZHANG Yan,ZHOU Bo,XUE Shifeng(1200)

Analysis of magnesium-aluminum alloy powder burning explosion parameters in the polishing process………………………………………………………………WANG Qiuhong,MIN Rui,SUN Yilin,DAI Aiping(1211)

Design and control for electromagnetically driven two-dimensional precise plane motion platform………………………………………ZHANG Wei,ZHOU Haibo,HUANG Zhenli,KONG Zhiping,DUAN Ji′an(1221)

Finite element model updating of stiffened structure based on multi frequency response functions…………………………………………………………ZHAN Ming,GUO Qintao,YUE Lin,ZHANG Baoqiang(1228)

Tooth profile design and parameter optimization of triple-circular-arc harmonic drives…………………………………………SHI Zhiqi,YANG Yong,HE Xiaofei,HUANG Yanyan,ZHOU Qinghua(1234)

Influence of eccentric incision on crack initiation and propagation of metal bars………………………………………………ZHANG Lijun,ZHANG Junwei,JIN Yongshan,CHEN Xianfeng,ZHANG Depei,REN Yujian,WANG Hanxiang,LIU Yanxin(1245)

Geochemistry and organic enrichment mechanism of shale in Yanxi Formation of middle Ordovician in central-south Hunan…WU Shiqing,GUO Yuancao,GUO Jianhua,LI Zhiyu,LI Jie,LIU Chensheng,WANG Xikai,GUO Xiangwei(1255)

Pseudo-random coded magnetic source transient electromagnetic emission technology and electromagnetic response analysis……………………………SHI Qi,LIU Lihua,NI Zhikang,LIU Xiaojun,FANG Guangyou(1268)

Study on traffic comfort in metro shield tunnel during differential deformation……………………………………………SHI Chenghua,LIU Jianwen,LI Xiang,LEI Mingfeng,PENG Limin(1279)

Analytical solution for one-dimensional large strain consolidation of saturated soft soils with continuous drainage boundary………………………………………………JIANG Wenhao,ZHAN Liangtong,YANG Ce(1289)

Preparation and acoustic performance of recycled ceramsiteconcrete noise-absorbing plate………………………LUAN Haoxiang,WU Jin,ZHU Wanxu,PAN Jiayu,ZHANG Ruidong,ZHOU Hongmei(1299)

Anti-segregation property and its mathematical model of high concentration filling slurry with coarse aggregate…………………………………………………………WU Fan,YANG Xiaobing,YANG Zhiqiang,GAO Qian(1309)

Mechanism and stability control of nonuniform and violent deformation of dynamic pressure roadway roof……………………………………………………LI Chen,HUO Tianhong,WU Zheng,LÜ Kun,ZHANG Bing(1317)

Force analysis method of buried pipeline in landslide section based on Pasternak double-parameter model……………………………………………ZHANG Jiaming,SHANG Yujie,WANG Rongyou,WANG Dianlong(1328)

Non-stationary creep model for salt rock based on generalized Kelvin model…………………………………………………………………………HAN Weimin,YAN Yifei,YAN Xiangzhen(1337)

Experimental study of seismic performance of corrugated steel plate shear wall with replaceable damper……………………………………………………WANG Wei,HAN Bin,WANG Wanzhi,HUANG Yuannzhao(1350)

Seismic performance of fabricated concrete columns and frames with sleeve grout defects………………………………………………………JIANG Youbao,YUAN Hanqing,ZHOU Hao,LUO Wenhui(1361)

Mechanical properties of segments when shield passes through upper-soft and lower-hard composite strata……………………HUANG Kan,SUN Yiwei,ZHAO Lei,DAI Yijun,WANG Dong,ZHOU Jingwei,QIU Lang(1371)

Reliability assessment of reinforced concrete in harsh western environment based on gamma random process………………………………………………………QIAO Hongxia,YANG Bo,LU Chenggong,ZHU Binrong(1384)

Experimental and theoretical investigation on anisotropy of shale tensile mechanical behaviors……………………MA Tianshou,WANG Haonan,LIU Mengyun,PENG Nian,ZHENG Nanxin,YI Shenghao(1391)

Temperature analysis and experimental study of core drill cutting and drilling process………………………………………QIAN Lei,WANG Xiaochuan,KANG Yong,MA Zhiwei,XIANG Meijing(1402)

Experimental study on performance of dye circulator system…………………………………………………LIU Houlin,JING Yucheng,YANG Bin,XIA Qing,WANG Kai(1410)

Feasibility study of PPG signal used in early warning of high temperature and humidity damage………………………………………………………………WANG Mengfei,JIN Longzhe,YU Lu,XU Mingwei(1424)

Evaluation of vehicle base location planning based on unascertained measure……………………………………………………………………………WANG Weidong,YAN Wen,GAO Hua(1431)

Three-level passenger flow control model for urban rail transit in consideration of safety………………………………………………………………………CHEN Zhiya,GAN Jinrong,WANG Xiaojun(1441)

Efficiency analysis of group intersection signal………………………LI Maosheng,YAO Lixuan,WANG Yongliang(1451)

Evaluation of noise reduction effect of damped wheels based on laboratory test and simulation…………………………………ZHAO Yanlei,HAN Jian,XU Shenghui,ZHU Ziwei,QIN Cai,XIAO Xinbiao(1461)

No.6

Effects of removal of arsenic,sulfur and iron on cyanide leaching of high-arsenic gold concentrate……………………………………ZHANG Shuanghua,ZHENG Yajie,CAO Pan,LAI Shenzhi,ZHANG Huajun(1471)

Temperature field and volatiles release behavior of anode during baking………FENG Mingjie,GUO Yi,MAO Cheng(1481)

Research of leaching behavior and kinetics of copper during process of leaching zinc waelz slag by waste acid………ZENG Tao,DENG Zhigan,ZHANG Fan,FAN Gang,WEI Chang,LI Xingbin,LI Minting,LIU Huiyang(1489)

Thermal key points selection and thermal error modeling of spindle system of CNC peripheral grinding machine……………………………………………………………LIAO Qihao,WANG Ling,YIN Guofu,XIE Zhengfeng(1501)

Analysis of offset load force and radial force of parallel double rods hydraulic cylinder………………………………………………YIN Yaobao,LI Shuanglu,LU Chang,YUAN Jiayang,XIAO Qiang(1509)

Sliding mode back-stepping control method for valve-controlled electro-hydraulic position servo system…………………………………………………JI Xinhao,WANG Chengwen,CHEN Shuai,ZHANG Zhenyang(1518)

Measuring method of gob volume based on axis deflection slice algorithm……………………………ZOU Guangming,ZHOU Shifan,WANG Xingdong,LIU Yuanjiong,LIU Huaiguang(1526)

Active disturbance rejection for temperature control based on PTFE semi-batch polymerization reactor process model……………………………………………………JIN Xiaoming,TONG Bufan,RUAN Xiaojun,WANG Jiadong(1534)

Design scheme for modeling and delay compensation for fabric mass per unit area on-line control system in heat setting process………………………………LI Ping,WANG Pengxing,MEI Xiaohua,JIN Fujiang,LIU Jianbao(1542)

EEG signal motion imagination feature extraction and classification algorithm based on CSP-PSO-SVM…………………………………………………LIU Bao,TANG Yuqi,CAI Mengdi,BO Yingchun,ZHANG Yue(1551)

Multi-objective optimization of cutting parameters on turning SiCp/Al composites based on energy efficiency………………………………………………………WANG Jinfeng,PAN Lijuan,XING Dixiong,DING Haimin(1565)

Numerical simulation of vibration response of soil around a single pile under traffic load and sloping bedrock condition……………………………YANG Jinchuan,DING Xuanming,WANG Chenglong,WU Daifeng,XIAO Zhiwei(1575)

Performance improvement method of bridge by the application of UHPC waffle deck panel………………………………………………………ZHU Jinsong,XU Yufeng,SUN Yadan,SHENG Rongrong(1584)

Research on strength regression and slurry optimization of cemented backfill based on response surface method…………………………YIN Shenghua,HAO Shuo,ZOU Long,KOU Yongyuan,LI Xiwen,ARMELLE Belibi(1595)

Aerodynamic characteristics of square high-rise building models in different turbulent boundary layers………………………………………………………LI Shiqing,WANG Hanfeng,LO Yuanlung,LUO Zhenbing(1606)

Experimental study on influence of particle size composition on permeability coefficient anisotropy of loess………………………………………………………ZHAO Qian,SU Lijun,LIU Hua,HE Jiangtao,YANG Jinxi(1615)

Bearing behavior of large-diameter variable cross-section steel composite pile based on optical fiber monitoring………………………………………CUI Yunliang,WANG Xin,ZHOU Lianying,WANG Haifeng,ZHOU Feng(1627)

Experimental research on mechanical properties of isolation joint of stone structure…………………………………………………………………………JIANG Yunfan,GUO Zixiong,XU Xiulin(1637)

Specimen size effect of strongly weathered granite of seabed in triaxial tests under K0-consolidation condition……………………………………………………………………………………………LI Chuanyi,CHEN Zhibo(1646)

Earthquake damage performance assessment of high monolithic precast concrete shear wall structure…………………………………QIN Chaogang,BAI Guoliang,WU Tao,LIU Boquan,XU Yazhou,SU Ningfen(1654)

Parameters optimization of"noise reduction type"dynamic vibration absorber for urban rail transit viaduct………………………………………………ZHOU Li,ZHANG Tianqi,LUO Yanyun,CHEN Dalei,WU Shang(1664)

Characteristics of particle percolation based on inhomogeneous particle size distribution………………………JIN Aibing,CHEN Shuaijun,SUN Hao,ZHAO Yiqing,QIN Xuan,JU You,GAO Yanhua(1673)

Simulation study on remediation of Cu-contaminated soil by three-chamber soil microbial fuel cell……………………………………………ZHOU Xuan,WANG Hui,ZHANG Jingran,SUN Yilun,LI Xianning(1682)

An inference method for probability distribution of extreme value engineering parameters based on normal information diffusion principle……………………………………GONG Fengqiang,WANG Tiancheng,HUANG Tianlang(1692)

Improved attribute interval recognition method and its application in risk assessment of water inrush in tunnels…………ZHOU Zongqing,KONG Jun,YANG Weimin,CHEN Yuanpei,ZHANG Qi,LI Liping,SHI Shaoshuai(1703)

Influence of metro wheel hollow-worn on contact stress of wheel tread…………………………………………………………………ZHOU Zhijun,LI Wei,CHEN Bin,WEN Zefeng(1712)

Parameter optimization of vehicle defrosting deflector based on free form deformation………………………………CAO Sishi,ZHANG Zhifei,XU Zhongming,HE Yansong,CHEN Zhu,ZHOU Tao(1721)

Evaporation properties of microwave heating strengthening flash evaporation………………………………………………………………TIAN Shihong,GUO Lei,JU Shaohua,ZHANG Hui(1730)

Power optimization of microwave reactor in divisional microwave regeneration process…………………………………HU Yangchun,WU Gang,LI Yuelin,LI Zonglin,ZHANG Jian,FENG Renhua(1738)

No.7

Influence of output type on bearing capacity of star wheel reducer………………………XIA Jianfang,GAO Yangbo(1747)

Full-field measurement of rotating blades based on digital image correlation…………………………………………YE Meitu,LIANG Jin,QIAN Boxing,ZONG Yulong,GONG Chunyuan(1757)

Dynamics models of four degrees of freedom rope-driven rigid-flexible hybrid wave compensation device……………………………………………………………………………JIANG Yuan,TANG Liang,CHEN Yuan(1767)

Weak fault detection of rolling bearing based on step change of chaotic attractor………………………………………………………………………YAN Xiaoli,TANG Guiji,WANG Xiaolong(1781)

Optimization design and experimental study of multi-layer spiral coils electromagnetic acoustic transducer……TANG Qin,SHI Wenze,LU Chao,CHEN Weiwei,ZHANG Jin,CHEN Yao,HUANG Qikai,CHENG Jinjie(1792)

Influence of variable-pitch on vibration effect of main shaft of large H-type VAWT………ZHANG Lijun,HU Kuoliang,GU Jiawei,ZHU Huaibao,JIANG Yijia,MIAO Junjie,LI Xiang,LIU Jing(1804)

Robust recognition of road markings using contour coincidence analysis………………………………………CHEN Jiacheng,XIAO Xiaoming,HUANG Yu,TANG Jin,GENG Yaojun(1813)

Stability analysis for sampled-data systems with quantization based on a fractional delay state looped function……………………………………………………………………CHEN Gang,CHEN Yun,WANG Wei,LI Yaqi(1825)

A linear camera calibration method considering camera imaging characteristics………………………………………………ZHANG Lei,TANG Xiaowei,LI Hongbing,DAI Lijuan,YAO Yang(1832)

Experimental study on swelling behavior of micro-expansive subgrade subjected to simulated rainfall…………………………………………YANG Guolin,DUAN Junyi,HU Min,KAN Jingliang,ZHANG Liwei(1842)

A calculation method for moving vehicle induced bridge dynamic amplification factor based on influence line………………………………………………………………………………WANG Ningbo,ZHOU Yi,ZHOU De(1853)

Seismic behavior of asymmetric extradosed bridge with action of traveling wave effect…………………………………………………………………………PAN Sixuan,TANG Mian,SONG Xuming(1862)

Analysis of fatigue crack propagation on orthotropic steel bridge deck……………………WANG Zhen,WANG Ying(1873)

Experimental study of modeling prestressed reinforced embankment to reduce differential settlement………………………………………………………LU Liang,TANG Tiantian,WANG Zongjian,YANG Dong(1883)

Study on failure characteristics of intermittent jointed rock mass under loading and unloading condition…………………………………ZHAO Yiqing,LIU Jiawei,JIN Aibing,SUN Hao,WANG Benxin,WEI Yudong(1893)

Key technology of intelligent matching and updating reserve data of mineral map………………………………………………………………DENG Jiqiu,LI Chenhan,FANG Qinglei,LU Fuyu(1902)

Dip effect of energy evolution mechanism of jointed sandstone under uniaxial compression…………………………………………………………………WANG Guilin,WEN Xingxiang,ZHANG Liang(1913)

Analysis on surface dynamic subsidence in grouting mining area based on TSS-DInSAR method…………………………………………WANG Jian,DONG Xianglin,YANG Keming,YAO Shuyi,SHI Xiaoyu(1924)

Modification of strain wedge model for soil resistance in front of piles in sloping ground……………………………………………………PENG Wenzhe,ZHAO Minghua,YANG Chaowei,LIU Yanan(1936)

Influence of treatment methods of composite consolidant on consolidation of earthen sites………………………………………ZHANG Yingmin,CHEN Wenwu,YANG Guang,DAI Pengfei,LI Yongjie(1946)

Analysis of damage characteristics and energy dissipation of cemented tailings backfill with different curing ages under uniaxial compression………………………………HOU Yongqing,YIN Shenghua,CAO Yong,DAI Chaoqun(1955)

Longitudinal force of CWR on high speed railway bridge based on fastener resistance test………………………………ZHU Zhihui,LI Xiaoguang,YAN Mingming,ZHAO Yangang,SHENG Xingwang(1966)

Load distribution function model of full-length bond GFRP anti-floating anchor……………………………………BAI Xiaoyu,ZHANG Mingyi,KUANG Zheng,WANG Yonghong,YAN Nan(1977)

Modified Duncan-Chang constitutive model for soft soil stabilized by magnesium oxysulfate cement considering three effect factors………………………………………ZHU Jianfeng,XU Riqing,LUO Zhanyou,RAO Chunyi(1989)

Simulation study on cooling system of automotive driving motor…………………………LIU Huijun,CHEN Fenfang,HUANG Rui,CHANG Jinwei,WEI Jingbang,YU Xiaoli(2002)

Influence of wheel harmonic wear on wheel-rail vertical force and vehicle stability………………………………………………XIE Jianping,CHEN Zhiya,PAN Ying,XIE Jianbo,WANG Qianyu(2013)

Dynamic simulation of long elastic sleeper track based on hyperelastic constitutive models of ruber cushion under sleeper…………………………………………………WANG Qihao,CAI Xiaopei,CHANG Wenhao,ZHAO Wenqiang(2021)

Comparison of viscoelastic and elastic analysis of slab track under temperature gradient loading………………………………………………ZHANG Yanrong,WU Kai,GAO Liang,CAI Xiaopei,YAN Shang(2028)

Analysis of snow and ice in bogie region of city rail train and anti-snow packing design…………………………………………………………GAO Feng,LIU Mingyang,MA Dongli,GAO Guangjun(2039)

No.8

Geochemical characteristics and organic matter enrichment mechanism of the Lower Cambrian Niutitang formation black rock series in central Hunan………………WU Shiqing,GUO Jianhua,WANG Xikai,LI Zhiyu,LIU Chensheng,JIAO Peng,CHEN Guang(2049)

Compaction property of gravelly soil as impermeable material……………………………………………………………ZHOU Yi,PENG Zhenbin,HE Zhongming,YIN Quan(2061)

Excavation parameters and performance prediction of earth pressure balance shield in typical strata of Changsha……………………………………………………YANG Guolin,ZHANG Peiran,CHEN Yajun,SHEN Zhenxin(2069)

Analysis of wind and rain characteristics at Pingtan strait rail-cum-road bridge site under influence of tropical depression……………………………………………………………HE Xuhui,WANG Zhen,YAN Lei,REN Lei,GUO Hui(2081)

Experimental study on interlaminar displacement of CRTSⅡballastless track on bridge under temperature load…………………ZHOU Linyu,ZHANG Yingying,YU Zhiwu,ZHANG Guangchao,ZHAO Lei,YUAN Yahui(2093)

Construction and evaluation index of rough surface of pavement of ballastless track structure in urban rail transit…CHEN Xianmai,PENG Jun,JIANG Xiaowen,WANG Yueyue,WANG Menglin,LIU Yaoqiang,GUO Shihao(2102)

Settlement calculation of composite foundation with concrete-cored DCM pile under rigid foundation…………………………………YU Jianlin,XU Shandai,YANG Xiaomeng,CHEN Zhangpeng,GONG Xiaonan(2111)

Frequency domain analysis of wind-induced response of±1 100 kV ultra-high voltage(UHV)transmission tower………………………………………………………………………YANG Ziye,SONG Xueqi,DENG Hongzhou(2121)

Research on bearing time effect of pile foundation in consolidation soil considering non-Darcy flow…………………………………………………………………YU Guangming,GONG Weiming,DAI Guoliang(2132)

Monitoring and analysis of vibration of concrete pumping pipe………………………………………………………DU Ting,WANG Benwu,YE Hao,XU Mingli,LI Zhiying(2143)

Reliability of different methods for rapid measurement of soil moisture content…………………………………………………………………CHEN Wenwu,CHEN Haoxin,BI Jun,LI Xiang(2152)

Frequency domain airborne EM inversion based on improved particle swarm depth neural network…………LIAO Xiaolong,ZHANG Zhihou,FAN Xiangtai,LU Runqi,YAO Yu,CAO Yunyong,XU Zhengxuan(2162)

Research on creep characteristics and creep model of red clay considering effect of dry density……………………………………………………………LI Na,CHEN Changfu,ZHU Shimin,MAO Fengshan(2174)

Analysis on seismic behavior of RCS beam-column assemblies with different axial compression ratios………………………………………………………………………………………………BAI Juju,LI Shengcai(2183)

Test method on bond-slip between timber and near surface mounted steel bar……………A Siha,ZHOU Changdong(2197)

Study on multi-layer coupling contact performance of single-strand wire rope…………CHEN Yuanpei,XIANG Jian(2209)

Reliability analysis of mine water supply network for dust control based on water age entropy……………………………………………………………………………PENG Ya,JIANG Zhong'an,WANG Pei(2221)

Mechanical behavior anisotropy and fracture characteristics of bedded sandstone………………………………………CHU Chaoqun,WU Shunchuan,ZHANG Shihuai,GUO Pei,ZHANG Min(2232)

Experiment on impact and residual compressive strength of segment of composite ship-bridge anti-collision system at high temperatures……………………………………WANG Lu,MA Wenxian,YIN Chunxiang,LIU Weiqing(2247)

Research on rock creep model based on dual effects of stress and time………………LIU Wenbo,ZHANG Shuguang(2256)

Reliability analysis of reinforced concrete based on Wiener stochastic process in heavy salt soil electrified environment………………………………LU Chenggong,WEI Zhiqiang,QIAO Hongxia,LI Kan,QIAO Guobin,YANG Bo(2266)

Back calculation of modulus of asphalt overlay structure of old concrete slab resonance crushed stone base based on FWD dynamic deflection basin……………………………LI Sheng,XU Lukai,MA Yongbo,CHENG Xiaoliang(2277)

Influence of surface effect on wave behavior of flexural waves in carbon nanotubes………………………………………………………………HUANG Bin,WU Jingxiang,JIN Hua,ZHOU Qiang(2289)

Numerical verification on two-dimensional acoustic emission source location without knowing velocity profile……………………………………WU Shunchuan,ZHANG Guang,ZHANG Shihuai,GUO Pei,CHU Chaoqun(2299)

Research on restoring force model of reinforced concrete rectangular beams considering reinforcement corrosion…………………………………ZHENG Hao,ZHENG Shansuo,HE Jinchuan,ZHANG Yixin,SHANG Zhigang(2312)

Experiment of seismic behaviors and seismic damage model of corroded steel frame beams………………SHANG Zhigang,ZHENG Shansuo,ZHANG Xiaohui,ZHENG Hao,DONG Jinqi,HE Jinchuan(2322)

Boundary coupling model and solution technology of mine ventilation network and gob flow field……………………………………………………………………WU Fengliang,GAO Yachao,CHANG Xintan(2333)

Shakedown analysis of railway ballast structure under multiple wheel loads……………………………………………WANG Kangyu,ZHUANG Yan,ZHANG Zhanrong,ZHANG Sheng(2343)

Study on vertical displacement of adjacent pile group caused by shield tunnelling………………………………………………KE Wenhai,GUAN Lingxiao,XUE Qi,XU Changjie,GENG Daxin(2353)

Strength degradation and forecast model of siltstone under combined effect of chemical solutions and freeze-thaw cycles…………………………………………………………WANG Lunan,YIN Xiaomeng,HAN Jie,WANG Jingze(2361)

No.9

Effects of grinding fineness on magnetism and agglomeration of magnetite………………………GUO Xiaofei,REN Weijie,ZHANG Mingrui,DAI Shujuan,ZHAO Tonglin,ZHU Jujian(2373)

Optimization and energy-saving for methanol+isopropyl acetate separation by extractive distillation and pressure swing distillation…………………………YANG Jinbei,HUANG Hui,YU Meiqiong,LIN Maozi,YAN Fuyu(2379)

Preparation and properties of curcumin dimer loaded nanoparticles……………………………………………WEN Nachuan,LIU Zhenbao,DU Peifang,HOU Jiaojiao,LIU Yanfei(2389)

Study on dominant discharge change in the lower Yellow River based on moving analysis method……………………LAI Zhiqiang,ZHAO Lianjun,JIANG Enhui,WU Guoying,ZHANG Xiang,CHENG Jialin(2396)

Effect of extrusion ratio on microstructure,mechanical and corrosion properties of Mg-Gd-Ni alloy……………………………………………………………WAN Jia,LIU Chuming,XU Shiyuan,WANG Bizheng(2405)

Effects of heat treatment on microstructure and properties of Al-5.12Mg alloy………………ZHONG Yeqing,LIN Gaoyong,XU Biao,MO Minhua,GENG Liyan,WANG Jiaqiang,YAN Fei(2413)

Analysis of forming properties and hydroforming process of braided fiber metal laminates…………………………………………LI Lei,LANG Lihui,HAMZA Blala,WANG Hongfeng,CAO Xinglong(2422)

Effect of surface ultrasonic rolling processing on rolling contact fatigue performance of camshaft material of valve train…………………………MA Mengyang,LI Xiaoqiang,LAI Fuqiang,HU Xiongfeng,WEI Tao,QU Shengguan(2430)

Flow field numerical simulation and experiment for a new type of dust suction apparatus based on dust start-up characteristics…………………………………………HU Junping,ZHANG Ling,SHI Tianliang,QIU Xianyan(2442)

Analysis of power characteristics of traveling hydraulic system of skid-steer loader…………………………………………CHEN Jinshi,HUO Dongyang,LIU Siyuan,WEI Xing,ZHANG Zhiwei(2451)

Prediction model of surface roughness of fused deposition modeling parts…………………………………HU Weiyue,LIAO Wenhe,LIU Tingting,XIAO Xingzhi,GU Mingfei,LI Shibo(2460)

Design and analysis of space conjugate tooth profile of harmonic drive considering deformation of flexspline cup………………………ZHU Feihong,DU Xuesong,SONG Chaosheng,ZHU Caichao,YANG Yong,LIAO Delin(2471)

Surface potential model for amorphous InGaZnO thin-film transistors with independent symmetric double-gate…………HE Yini,DENG Lianwen,ZHEN Liying,QIN Ting,LIAO Congwei,LUO Heng,HUANG Shengxiang(2480)

Energy optimized control of MMC arm under unbalanced grid condition……………………………………………HUANG Zhi,XIA Xiangyang,PAN Zhimin,DONG Wei,LEI Yunfei,JIANG Fei,ZHANG Chengqi,PEI Xiangyu,ZHANG Jing,XIE Yaoxuan(2489)

Research on 3D laser image denoising algorithm based on three splines inter polation function………………………………………………………………TAN Wen,FANG Miao,DUAN Feng,ZHOU Bowen(2496)

High precision harmonic parameter estimation algorithm based on spectral sequence transformation………………YANG Xi,WANG Xuming,CHEN Bingquan,ZHANG Renmin,WANG Xiangming,LEI Kejun(2504)

Influence of insertion ratio of large-diameter piles in deep mud stratum on deformation characteristics of foundation pit in Zhuhai…………CHEN Xiaoqing,DING Wenqi,QU Hongbo,QIAO Yafei,LU Xingbang,LAI Songying(2514)

Strength criterion effect on elasto-plastic solution of deep tunnels considering strain softening characteristics……………………………………………………………………………GAO Yongtao,LIANG Peng,ZHOU Yu(2525)

Comparative experimental study on mechanical properties of connection zone of widened box girders……………………………………………ZHANG Lifang,MA Haiyan,YU Hongfa,WANG Ying,MEI Qiquan(2538)

Magnetotelluric inversion based on convolutional neural network…LIAO Xiaolong,ZHANG Zhihou,YAO Yu,LU Runqi,FAN Xiangtai,CAO Yunyong,FENG Tao,SHI Zeyu(2546)

Study on two-level design method of urban shallow subway tunnel structure crossing active fault…………………………………………………AN Shao,TAO Lianjin,BIAN Jin,ZHANG Yu,HAN Xuechuan(2558)

Analysis of dynamic characteristics of coarse-grained soil high embankment under traffic load………………………………………………………………HE Zhongming,QIU Junjun,KE Wei,FAN Dianhua(2571)

Numerical simulation and analysis of in-situ leaching uranium production well cleaned by submerged water jet………………………………………………………………CHENG Wei,LEI Jieheng,LEI Zeyong,LI JianHua(2580)

Dynamic compaction treatment effect and parameter analysis of airport excavation and filling interface foundation……………MA Deqing,SHEN Yupeng,ZHU Zhilong,HU Huihua,WANG Shuhua,SHI Tianqi,ZHANG Peng(2587)

Influence of port water injection on performance of turbocharged gasoline direct injection engine…………………………………………PENG Zhong,QIN Jing,PEI Yiqiang,ZHANG Qirui,SONG Dongxian,CUI Yabin,ZUO Kunfeng,YUAN Zhongying,WU Shenchao(2595)

Experimental study on cylinder-to-cylinder variation of in-cylinder combustion in turbocharged direct injection gasoline engine……………………………BAO Huanhuan,FU Jianqin,LIU Qi,DUAN Xiongbo,LIU Jingping(2604)

Variation characteristics of molecular structure unit during low-temperature oxidation of lignite coal……………………JI Yucheng,ZHANG Yinghua,HUANG Zhi′an,SHAO Zhenlu,GAO Yukun,XIAO Shanlin(2614)

Influence of different wheel tread on static wheel-rail contact behavior in subway turnout area……………………………CHEN Rong,DING Ye,CHEN Jiayin,WANG Xuetong,XU Jingmang,WANG Ping(2624)

Effect of arrangement position of vortex generator on aerodynamic performance of small vertical axis wind turbine…………………………………………ZHANG Lijun,ZHU Huaibao,HU Kuoliang,GU Jiawei,MIAO Junjie,JIANG Yijia,LI Xiang,YU Hongdong,LIU Jing(2634)

Research on stall discrimination of a mixed-flow water jet pump in hump region……………………………………………………LI Enda,LI Wei,SHI Weidong,MA Lingling,YANG Zhenyu(2643)

Study on initiation mechanism of rolling contactfatigue Class I on intercity EMU wheels……………………………………………CAI Yutian,ZHAO Xin,CHEN Jiaming,LIU Yongfeng,WEN Zefeng(2653)

Influence of subway train speed on fire smoke temperature characteristics………………………………………………………MA Li,LIU Shangming,WEI Gaoming,FAN Jin,GAO Yu(2663)

Calculation of passenger train derailment course induced by overspeeds in curve……………………………………………………………………GONG Kai,LIU Linya,XIANG Jun,LUO Kun(2673)

No.10

Study on process mineralogy of vanadium-titanium magnetite concentrate in Chaoyang,Liaoning Province…………………………………………………CHEN Wangxing,LIANG Haijun,GAO Zixian,XUE Xiangxin(2681)

Simulation research,application status and development trend of vibrating screen……………………………………………XIA Xuhui,JING Weimin,ZHANG Zelin,WANG Lei,ZHANG Huan(2689)

Desulfurization of pyrite in high-sulfur bauxite with microwave roasting process…………………………………JIN Huixin,WU Fuzhong,LI Junqi,CHEN Chaoyi,LIU Hongling,YANG Qian(2707)

Numerical simulation of effects of cutting edge geometry on machining nickel-based alloy…………………………………………………………LI Songqing,YIN Xiaolong,ZOU Yinhui,DENG Wenjun(2719)

Effect of alloy composition of materials for TBM cutter rings on microstructure and wear resistance…………………………………………JIA Lianhui,SHANG Yong,LONG Weimin,XIA Yimin,XUE Guangji(2730)

Crack localization with directional piezoelectric fiber sensors based on Lamb wave…………………………………………WANG Songlai,WU Wanrong,SHEN Yiping,HAN Bin,TANG Binlong(2739)

Terminal sliding mode control for robotic manipulator based on sliding mode disturbance observer………………………………………………………………………………HAN Junqing,WU Aiguo,DONG Na(2749)

Statics analysis of a planar parallel mechanism with kinematic redundancy and closed-loop limb……………………………………………………………………QU Haibo,HU Lanqing,GUO Sheng,LI Shujie(2758)

Universal variable crown technology for strip profile control in wide strip rolling mills……………CAO Jianguo,HUANG Xiaohai,ZHAO Qiufang,XIONG Haitao,WANG Tao,ZHANG Zhaoxiang(2772)

Effect of flatness and tension on aluminum foil transverse buckling during coiling process………………………………………YU Haijun,HE Anrui,CHEN Changke,WANG Xiuliang,ZUO Xiaogang(2782)

Analysis of rock breaking mechanics model for TBM disc cutter…………ZHANG Guiju,TAN Qing,LAO Tongbing(2792)

Design and application of a parallel mechanism with variable workspace………………………LI Dian,GUO Sheng(2800)

CMAC-fuzzy PID control of multi-dimensional force loading system of hydraulic drive parallel mechanism……………………………ZHAO Jinsong,WANG Chunfa,XU Jiaxiang,DONG Jie,SUN Xinyu,ZHAO Zining(2811)

Design and kinematic analysis of a 5-DOF hybrid 3D printer…………………………………………………ZHANG Jun,CHI Changcheng,TANG Tengfei,FANG Hanliang(2822)

Establishment and simulation analysis of coupled vibration system model between stands of tandem rolling mills based on rollers multi-modal mode……………………………WANG Qiaoyi,CUI Mingchao,WANG Han,GUO Shan(2834)

Detection of pipeline with elbow using ultrasonic guided wave…………………………………ZHU Longxiang,ZHAO Shi,WANG Yuemin,ZHANG Haibing,DUAN Gang(2844)

A feature extraction and classification algorithm based on PSO-CSP-SVM for motor imagery EEG signals………………………………………………………………LIU Bao,CAI Mengdi,BO Yingchun,ZHANG Xin(2855)

An intelligent characterization method of nonlinear spectrum based on Volterra frequency domain kernel………………………………………………………………CHEN Lerui,CAO Jianfu,HU Heyu,WANG Xiaoqi(2867)

Research on remote sensing retrieval of soil chromium pollution in nonferrous metal mining area…………………………………………………CHEN Yubo,XUE Yun,ZOU Bin,WEN Yimin,ZHOU Songlin(2876)

Sampled-data synchronization of delayed complex dynamical networks based on a new Lyapunov functional method………………………………………………………………………………CHEN Gang,LI Jia,XIAO Shenping(2885)

Research on stress and cracking characteristics of high-speed railway asphalt concrete under complex loads……………………………………………………………………………LÜ Song,XIAO Hong,ZHANG Zhihai(2893)

Correction scheme of auxiliary shaft tower based on foundation reinforcement method using root piles…………………………………………………………………………CAO Mingxing,GAO Yongtao,ZHOU Yu(2906)

Quantitative evaluation and optimization method of disk joint model…………………………………………………………LIU Tiexin,ZHENG Jun,LIU Aijuan,ZHENG Hongchun(2917)

Mechanical performance of a flexural shear mild steel damper………………………………………WANG Wei,WANG Wanzhi,LIANG Yujian,XIANG Zhaoxing,HAN Bin(2925)

Influence of coal body stress on drilling cutting force…ZHAO Zhigang,QIU Dongwei,YANG Kun,ZHENG Yahua(2941)

Limit equilibrium analysis on stability of slope reinforced by anti-slide piles with the nonlinear strength criterion…………………………………………………LUO Wei,XU Changjie,RONG Yao,CHEN Lei,DAI Chenglin(2950)

Effects of DC electric field on spherical expansion flame under different initial pressures………………………………………………………………………………………LU Jueran,GAO Zhongquan(2959)

Prediction and characteristics analysis of building heating and cooling loads at planning phase…………………………………ZHU Li,ZHANG Jiqiang,WANG Feixue,SUN Yong,TIAN Wei,ZHU Chuanqi(2969)

Effects of dowel joints on vibrations of metro train-deteriorated floating slab track system……………………………………………JIANG Jiqing,ZHANG Jiabin,DONG Beibei,WEI Gang,LIAO Juan(2978)

Calculation of rail internal impedance based on tubular conductor model…………………………………………………ZHANG Youpeng,WANG Dong,ZHAO Bin,ZHAO Shanpeng(2988)

No.11

Net-shape forming and densification mechanism of MIM418 turbine wheel using master alloy method………………………………………………………………CHEN Xiaowei,LIU Ye,ZHANG Lin,QU Xuanhui(2999)

Effects of C/N molar ratios and metal carbides on wetting behaviors of TiCN-Ni alloy system…………………ZHANG Li,XIAO Qiaoping,LIU Tao,LING Qun,LUO Guokai,WU Houping,CUI Yanming(3007)

Non-isothermal phase-field simulation of microstructure in powder-based additive manufacturing……………………………………………………………………………YANG Yangyiwei,YI Min,XU Baixiang(3019)

Research progress on preparation of ablative ceramic modified C/C composites by reactive infiltration……………………………………………………………HOU Xuchu,HAO Zhenhua,SHU Yongchun,HE Jilin(3032)

Research progress and prospect of WC cemented carbides with metal-ceramic binder…………………………………………………………ZOU Qin,ZHANG Menglei,LI Yanguo,WANG Mingzhi(3044)

Microstructure and mechanical properties of Al-Mg-Sc-Zr alloy by powder feeding laser additive manufacturing……………………………LIN Zehuan,LI Ruidi,ZHU Hongbin,YUAN Tiechui,XU Rong,YAN Hua,YE Bing(3055)

Effect of lubricating phase size on tribological behavior of Ag-WS2composites……………………………………………………LI Yun,SUN Yang,KANG Xiao,ZHANG Lei,ZHOU Kechao(3064)

Microstructure and properties of graphite/Cu-Zr composites with high thermal conductivity and low coefficient of thermal expansion………………CHEN Cunguang,CUI Qianyue,YU Chengwei,HAO Junjie,GUO Zhimeng(3072)

Microstructure and properties of Fe-Mn-Si based shape memory alloy by powder feeding laser additive manufacturing…………………………………………………………………YAO Cong,LI Ruidi,YUAN Tiechui,NIU Pengda(3081)

Surface characteristics of selective laser melted AlSi10Mg mirrors……………………………………………………………HAN Xiao,KANG Nan,JIAO Jianchao,WANG Chao(3088)

Preparation and characterization of micron-sized 3D porous high-purity aluminum……ZHANG Maogui,WANG Jun,TANG Shui,JIA Ming,LIU Fangyang,JIANG Liangxing,AI Liang,AI Yan(3093)

Diffusion behavior of intermetallic compounds in powder metallurgy magnesium alloys………………………………SUN Jiaxing,CHENG Kaiming,LI Peiliang,LIU Cong,LI Guanyu,ZHOU Jixue(3101)

Microstructure and properties of CuAlMn alloy powder by selective laser melting………………………………………………………………XIONG Yi,ZHENG Dan,YUAN Tiechui,LI Ruidi(3110)

Optimization of cold sintering process and piezoelectric properties of PZT ceramics………………………GUO Ru,MA Yupeng,ZHANG Yan,ROSCOW James,BOWEN R.Chris,ZHANG Dou(3119)

Study on gelcasting of zirconia ceramic cover plate……………LI Benke,CHEN Yinzhi,LI Xiaolan,WANG Chenyang,HUANG Guoji,XIE Rui,WANG Xiaofeng(3128)

Dielectric and piezoelectric performance of aligned porous BaTiO3-based ceramic……………………………………………………BAO Yinxiang,ZHANG Yan,ZHOU Kechao,HUANG Boyun(3136)

Microstructural evolution of lubricating films of silver matrix self-lubricating nanocomposite…………………………………………ZHANG Qiang,ZHANG Kemo,ZHOU Yuanzi,QU Qiang,KANG Xiao(3144)

Sliding electrical contact behavior of silver-based composite in vacuum………………………………………………ZHOU Yuanzi,LI Li,ZHU Linlin,ZHANG Kemo,ZHANG Qiang(3152)

Microstructure and mechanical properties of Mg-6Al-1Sn-Mn sheets prepared by on-line heating rolling…………………………………………LIU Qiang,SONG Jiangfeng,ZHAO Hua,XIAO Biquan,PAN Fusheng(3159)

Preparation of metal thin foils for high resolution TEM characterization………………………………………BAI Hongri,WANG Hao,LIANG Liuning,LIU Ye,SHEN Xi,WEN Yuren(3169)

Research on structure,mechanical and high-temperature properties of Zr and Cr doped TiAlN coatings……………………………………………………………………LIU Huijun,HU Chun,LIU Zheren,CHEN Li(3178)

Interdiffusion behavior between NiCrAlY coating and Ni-based single-crystal superalloy…………………………………………………………DENG Peng,LI Qin,LIU Yingkun,YIN Bin,SHI Qian,ZHANG Lijun,YANG Kun,DENG Chunming,LI Feng(3187)

Methods for preparing metal-based nacre-inspired composites……………………………………………………YANG Sen,JIN Li,DONG Jie,WANG Fenghua,DONG Shuai(3199)

Synthesis and lithium storage performance of spinel LiMn2O4nanorods…ZHOU Gang,CHEN Yuejiao,FAN Hongbo(3211)

Research progress and prospect of SiC composites………………ZOU Qin,ZHOU Xin,LI Yanguo,WANG Mingzhi(3220)

3D lithiophilic ZnO modified biomass porous carbon derived from absorbent cotton for highly stable lithium metal anode………………………………………GONG Liang,ZHANG Duo,JIANG Chenhao,SHEN Kang,TANG Yiping(3233)

Energy storage performance of PVDF-based composite film with BT/PMN-PT two-component ceramic…………………………………………LIU Huan,ZHANG Shuo,XU Xingang,LIN Xiujuan,HUANG Shifeng(3242)

Strategy of crown distribution based on flatness priority in finishing rolling……………………………………………………………LIU Dongye,HE Anrui,SHAO Jian,CHEN Chaochao(3253)

No.12

Review of hydrometallurgical processes for recycling spent lithium-ion batteries………………YANG Jian,QIN Jitao,LI Fangcheng,JIANG Liangxing,LAI Yanqing,LIU Fangyang,JIA Ming(3261)

Research progress on recycling technology of end-of-life silicon photovoltaic modules……………………………………………ZHOU Zhe,SUN Kaiwen,JIANG Liangxing,JIA Ming,LIU Fangyang(3279)

Research progress on in-situ resources utilization of Lunar surface minerals…………………………………………………………LI Chen,WEI Kuixian,LI Yang,MA Wenhui,ZHAO Sizhe(3289)

Potential parameter fitting and molecular dynamics simulation of KF-NaF-AlF3low temperature electrolyte system based on density functional theory………………………WANG Jingkun,GUO Hui,ZHANG Hongliang,LI Jie(3300)

Occurrence characteristics and leaching toxicity evaluation of residues from zinc sulfide oxygen-pressure leaching process…………CHEN Yongming,DAI Jie,HU Fangyuan,LI Yun,CHANG Cong,XIANG Changliu,HE Jing(3309)

PFCsformation process in aluminum electrolysis:experiment and First-principles study on adsorption of F on graphene……………………………………………………………………SUN Kena,ZHANG Hongliang,WANG Jingkun(3321)

Numerical simulation and optimization of contact state for cathode slot of aluminum electrolytic cell……………………………………………………………………LÜ Xiaojun,SUN Qidong,CHEN Chang,LI Jie(3331)

Detection method of metal impurities in electronic hexachlorodisilane products……………………………WAN Ye,XIAO Jin,YAN Dazhou,ZHANG Yuanyuan,ZHONG Qifan,LIU Fangyang(3341)

Influence of taurine on the tin electrorefining process……ZHONG Xiaocong,ZHANG Bin,LIN Zhencong,LI Jinhui,LIU Zhiqiang,LU Yongsuo,WANG Ruixiang,XU Zhifeng(3349)

Numerical simulation of anti-sandwich structure composite porous Pb-alloy anode……………………………………………………LI Hongbin,YANG Jian,JIANG Liangxing,ZHANG Hongliang(3357)

Study on recycling Li of waste lithium ion batteries by reduction roasting………………………YAN Kang,XIONG Zhengyang,LIU Zhilou,XU Zhifeng,WANG Ruixiang,NIE Huaping(3367)

Rheological properties of coarse aggregate at low temperature and its regression models………………………………YIN Shenghua,LIU Jiaming,CHEN Wei,SHAO Yajian,WU Libo,WANG Xiaotian(3379)

Preparation of ursodeoxycholic acid berberrubine ester……………………………LONG Shuo,LIU Zhenbao,PENG Dongming,LIU Xiaoqin,JIANG Ting,LIU Yanfei(3389)

Energy-efficient bipedal walking for humanoid robots based on a three-mass model……………………………………………………………HE Jie,ZHANG Xiaohui,XIAO Xiaohui,DING Jiatao(3396)

Sliding mode decoupling control for electro-hydraulic multi-dimensional force loading system with parallel mechanism…………………………ZHAO Jinsong,SUN Xinyu,DONG Jie,WANG Chunfa,XU Jiaxiang,WANG Zhipeng(3407)

Recommendation algorithm of college entrance examination based on fuzzy clustering of multi-feature weights……………………………………………………………………………YU Kuifeng,DUAN Guihua,SHI Xiang(3418)

Paleogeographic evolution and prototype basins of Ordovician in central Hunan and its surrounding areas……………………………………TAN Hui,QIN Mingyang,LI Jie,GUO Jianhua,WU Shiqing,BIAN Ruikang(3430)

A processing model of space-time array electromagnetic data………………………………………………ZHOU Cong,TANG Jingtian,YUAN Yuan,LAN Xueyi,GUO Dong(3444)

A permeability model of shale complex fracture networks considering slippage effect and tortuosity distribution…………………………………………………………………………………………WANG Fuyong,CHENG Hui(3454)

Multi-rigid-body model of dynamic wind-induced deflection for overhead transmission lines…………………………………………………………………………HU Xin,WANG Zhangqi,YANG Wengang(3465)

Experimental study on assessment of mechanical performance of prestressed concrete continuous box girder under different cracking conditions……………………………………………LI Kezhong,CAO Guohui,YANG Ligen(3475)

Strain hardening damage model of cracked soil during dry-wet circulation based on Laplace distribution………………………………………………………………ZHOU Zhi,ZHANG Jiaming,NING Fulong,LUO Yi(3484)

Damage mechanical properties of red sandstone with different saturation during freeze-thaw………………………………SONG Yongjun,CHE Yongxin,CHEN Jiaxing,REN Jianxi,BI Ran,CHEN Shaojie(3493)

Effect of unevenly distributed fine-grained soil in space on moisture migration………………YU Qianmi,TAI Bowen,NIU Jiqiang,WANG Guoda,LIU Zhenhua,FENG Yan,MA Zhengfeng(3503)

Changes in circumferential pressure and stresses in existing tunnels caused by tunnel crossing………………………………………………WEI Gang,QI Yongjie,WU Huajun,HUA Xinxin,ZHANG Yuanzhu(3515)

Analysis of thermal perfection of liquid desiccant dehumidification based on accessible handling region……………………………………………………………………CHEN Bowen,YIN Yonggao,CHENG Xiaosong(3528)

Effect of rail gap on aerodynamic performance of maglev train………………MENG Shi,ZHOU Dan,MENG Shuang(3537)

350 km/h high speed railway ballast flight analysis based on wind tunnel test and CFD simulation……………………………………………………………JING Guoqing,DU Wenbo,DING Dong,JI Shengcheng(3546)

Intrinsic scale ratio of scattered ballast bed in sandy desert areas based on numerical experiment……………………………………………………………………………ZHANG Zhihai,XIAO Hong,LING Xing(3554)

Formula for stability of the upper arch of CRTS-II track slab based on models of unequal wavelength…………………………………………………YANG Junbin,ZHANG Guangming,YANG Rongshan,LIU Xueyi(3566)

Traffic congestion spreading analysis based on causal nexus……CHEN Meilin,ZHENG Zhihao,GUO Bao,WANG Pu(3575)

The End of Vol.51(2020)