《粉末冶金材料科学与工程》2013年第18卷1～6期总目次

理论研究

粉末高温合金FGH96中的原始粉末颗粒边界及其对合金拉伸断裂行为的影响·····················································马文斌，刘国权，胡本芙，张义文, 刘建涛(1): 1-7

锂硼合金与气体的相互作用·············································王茂安，刘志坚，黄海锋(1): 8-12

瓶颈中颗粒流动的堵塞行为························欧阳鸿武，程 亮，黄立华，黄誓成，王 琼，刘卓民(1): 13-19

化学法去除废旧硬质合金表面TiN涂层过程中的腐蚀行为······刘 阳，谭敦强，陆德平，陆 磊，龙 建(1): 20-25

Ce和B对超音速等离子喷涂高铝铜合金涂层组织结构的影响·············································杨效田，王智平，李 霞，路 阳，李文生，刘俊钊(1): 26-32

粉末注射成形充模过程中粉体分布的数值模拟··············方 伟，何新波，张瑞杰，章书周，曲选辉(2): 149-154

低速转鼓中颗粒流态的滞后转变行为·········欧阳鸿武，黄立华，程 亮，黄誓成，王 琼，刘卓民，张 新(2): 155-162

DeformTM有限元模拟在2A42/2%TiB2复合材料热压缩变形组织演变研究中的应用··················································于迪尔，刘志义，谷艳霞，李福东，应普友(2): 163-168

元素掺杂对合成β-FeSi2的影响····························高君玲，陈秀娟，赵文军，张鹏林，余淑荣(2): 169-175

Al-5.7Cu-0.4Mg-1.2Ag 合金的时效析出行为·················谷艳霞，刘志义，于迪尔，李福东，赵永春(2): 176-181

多孔 Ni3Al金属间化合物的高温氧化行为···················董虹星，刘秋平，罗晓晔，贺跃辉，吴 靓(2): 182-190

Zr对 Ag-Cu-Ti钎料合金显微组织与力学性能的影响··········李秀秀，肖代红，申婷婷，张福勤，冉俊铭(2): 191-197

聚硅氧烷 HPSO-VPSO 体系的交联和裂解···················李树杰，张 岚，陈孝飞，刘文慧，席文君(3): 315-319

用固溶体和单组元为原料制备的Ti(C,N)基金属陶瓷的组织与性能···············································南 晴，张 立，解明伟，冯于平，王 喆，贺跃辉(3): 320-325

单轴模压法制备Cu-Fe基金刚石复合材料超薄切锯胎体的致密化机理····················································董洪峰，李文生，路 阳，张 杰，王军伟(3): 326-332

2099 铝锂合金均匀化退火的微观组织及 Al3Zr析出分析········刘 雄，刘志义，于迪尔，刘灿威，夏 鹏(3): 333-340

纳米氟硼酸钾润滑油添加剂的摩擦学机理····················柳学全，李 一，霍 静，李红云，李红印(3): 341-345

蛇纹石微粉对类轴–轴瓦摩擦副的自修复效应及作用机理······张保森，徐滨士，许 一，巴志新，王章忠(3): 346-352

C/C-SiC-Cu5Si复合材料的显微形貌及形成过程·····················逯雨海，肖 鹏，李 专，曾志伟(3): 353-356

Ti-Al-Nb-W 合金的高温变形行为·····················杨广宇，刘 咏，王 岩，汤慧萍，贾文鹏，贺卫卫(3): 357-362

9Cr-ODS 钢的烧结收缩动力学曲线特征·················杨 剑，郭志猛，杨薇薇，罗 骥，郭 烽，吴成义(3): 363-368

氢氧化钠分解白钨矿的热力学分析······何贵香，何利华，曹才放，赵中伟，陈星宇，陈爱良，刘旭恒，贺跃辉(3): 368-372

TiAl有序金属间化合物超塑性变形的状态方程··························张俊红，徐亚娟，贺跃辉(4): 465-470

等温退火对ZrCuAlNiCoNb非晶合金硬度和杨氏模量的影响···董明斌，李 桢，顾 及，宋 旼，阮建明(4): 471-476

铜基固体无铅自润滑材料中WS2的烧结行为····赵 林，姚萍屏，肖叶龙，谭慧强，贡太敏，周海滨，左晓婷(4): 477-482

Fe和Ni对Al-Cu-Mg-Ag耐热合金组织和高温力学性能的影响············································刘灿威，刘志义，林 茂，夏 鹏，刘 雄，王 恒(4): 483-490

Ti对 Fe-Cr-Ni-Al合金抗氧化性能的影响····················吴彩霞，尹付成，李 智，赵满秀，龙朝辉(4): 491-496

23Co13Ni11Cr3Mo 钢的奥氏体静态再结晶行为··························黄始全，易幼平，李蓬川(4): 497-502

Mo-Si-B 基超高温合金粉体的机械合金化·····································刘张涛，郭喜平(4): 503-509

基于BP人工神经网络的Al2O3-13%TiO2复合陶瓷涂层厚度预测··················································时礼平，吴玉国，迟开红，陈 彬，吴 胜(5): 621-626

W/WO2.72一维纳米异质结构的合成及生长机理···············党丁盈，刘新利，伍 镭，赵 耀，贺跃辉(5): 627-630

不同丝径 316L 不锈钢纤维的再结晶行为···················赵秀云，刘 咏，王 岩，冯 萍，汤慧萍(5): 631-638

锅炉管高频熔覆温度场的数值模拟························岑 虎，王云山，雷剑波，孟庆若，刘少军(5): 639-646

粉末冶金 TA15 钛合金的高温塑性变形行为·················王 琪，文 智，王 斌，易丹青，钱 锋(5): 647-654

纳米金颗粒熔化与烧结过程的分子动力学模拟······吴 茂, 常玲玲, 崔亚男, 陈晓玮, 何新波, 曲选辉(6): 775-782

新型Al-Cu-Li合金的热稳定性··············程 彬, 郑子樵, 罗先甫, 范春平, 钟继发, 韩 烨, 孙景峰(6): 783-788

TiC/316L 不锈钢复合材料的高温氧化行为·····························韩 幸，蔺绍江，熊惟皓(6): 789-795

湿式铜基摩擦材料的磨损图研究··············谭慧强, 姚萍屏, 赵 林，肖叶龙，贡太敏，周海滨, 左晓婷(6): 796-800

工艺技术

粉末冶金渗铜钢的摩擦磨损性能··································孙加宝，熊 翔，党胜云，刘如铁(1): 33-38

熔渗铜用多孔金刚石坯体的制备·····················任淑彬，郭彩玉，李 改，何新波，曲选辉，陈志宝(1): 39-44

添加 Ti对 MIM HK30 不锈钢力学性能和尺寸稳定性的影响···········沈红仁，李益民，刘 晨，何 浩(1): 45-52

Cu/V0.97W0.03O2复合材料的组织及性能·······················邹军涛，张 乐，王献辉，黄 星，梁淑华(1): 53-58

沉淀法制备片状、球状、柱状纳米掺铟氧化锌及其表征········朱奕漪，段学臣，段文杰，程亚娟，蒋 波(1): 59-65

喷射成形 2124 铝合金的热轧致密化与力学性能···············杜 良，刘允中，游 江，李志龙，李凤仙(1): 66-71

钛表面 FHA-SrHA 双相生物陶瓷涂层的制备及性能··················冯芳芳，尹 乒，雷 霆，吕凝磊(1): 72-77

碳化硅体积分数对 SiCp/Al-30Si复合材料组织与性能的影响····倪增磊，王爱琴，谢敬佩，方 明，张利军(1): 78-82

水热处理对 In2O3的前驱体结构与形貌的影响···········吴 城，刘志宏，李玉虎，苏 飞，刘智勇，李启厚(1): 83-89

冲击电流对汽车零件用粉末压制过程的致密作用································屠挺生，林大为(1): 90-93

Nb-Ti-Al合金及其硅化物涂层的高温氧化行为·········蔡圳阳，肖来荣，余宸旭，刘赛男，毛海军，曾德露(1): 94-101

纤维分布对 C/C 复合材料烧蚀性能的影响························解惠贞，傅利坤，孙建涛，秦淑颖(1): 102-106

掺钴氧化钌(RuO2/Co3O4)·nH2O 复合薄膜电极的制备与表征·········黄小清，甘卫平，杨 杰，李 祥(1): 107-112

管状α-Fe2O3的合成、表征及光学性质····························刘淑玲，李苗苗，李 淑，许青青(1): 113-118

聚酰胺酸包覆银纳米粒子的制备及表征····················文杰斌，李 俊，陈 俊，刘观辉，李衡峰(1): 119-124

不同烧结工艺制备的Fe基孕镶金刚石磨头结构和摩擦磨损性能·················································董洪峰，路 阳，李文生，张 杰，褚 克(1): 125-131

TiCN/VCN 多层膜的力学和摩擦磨损性能·······························曹 峻，许俊华，喻利花(1): 132-138

Si掺杂对Al-Ti-N涂层的结构、力学性能和抗氧化性能的影响··袁红梅，杨 兵，李 佳，吴明晶，陈 利(1): 139-143

FeAl多孔膜材料的制备及高温抗氧化性能······························周志华，高海燕，贺跃辉(1): 144-148

超粗晶硬质合金的显微结构和力学性能··························吴冲浒，聂洪波，曾祺森，肖满斗(2): 198-204

多孔金刚石坯体熔渗铜工艺························任淑彬，郭彩玉，李 改，何新波，曲选辉，陈志宝(2): 205-210

高能球磨对雾化 Fe基软磁粉末结构及性能的影响··················周 娟，刘华山，肖于德，王 伟(2): 211-216

喷涂距离对超音速火焰喷涂WC10Co4Cr涂层沉积效率及耐磨粒磨损性能的影响·················································周伍喜，李玉玺，李松林，易长宾，颜 维(2): 217-223

Cu-Ti合金中 Ti含量对 C/C 复合材料润湿性能的影响·········于 奇，张福勤，张小英，夏莉红，周显光(2): 224-229

超音速等离子喷涂法制备 PbTiO3涂层的表征················李国禄，卢晓亮，王海斗，邢志国，徐滨士(2): 230-234

速度与载荷对无铅铜铋轴承材料摩擦学特性的影响······················林福东，黄 平，尹延国(2): 235-240

正火及高温回火对低合金高强度铸钢组织与性能的影响············································雷 勇，许晓嫦，李 良，张 奇，赵凤晓，徐浩浩(2): 241-249

粉末冶金高速钢的热处理与热磁分析··············································孙世清(2): 250-253

Si含量对 ZrSiN 薄膜微结构及性能的影响·······························马冰洋，喻利花，许俊华(2): 254-258

高能球磨制备 Al2O3/Cu 复合材料··························李 斌，刘贵民，丁华东，雍青松，杜建华(2): 259-264

热爆反应合成 AlN-SiC 材料··········································梁宝岩，穆云超，樊 平(2): 265-269

纳米 NaY 分子筛的制备及其晶化过程················杨 良，刘雪颖，何捍卫，周海生，解东梅，王 晓(2): 270-275

原位合成莫来石柱状晶强化羟基磷灰石材料······················穆柏春，李 强，于景媛，王 征(2): 276-280

钠热还原法制备铌铝金属间化合物粉末··························王 娜，胡启晨，张 垚，朱鸿民(2): 281-289

超细 Fe2O3粉末的结构及热稳定性·························孙 菲，刘旭隆，王 秀，李秋菊，洪 新(2): 290-295

聚酰胺酸包覆银纳米粒子的制备及表征····················文杰斌，李 俊，陈 俊，刘观辉，李衡峰(2): 296-301

添加聚丙烯腈预氧丝粉对泡沫炭结构和性能的影响······················朱登伟，张红波，李万千(2): 302-308

Co含量与烧结温度对纳米晶WC-Co硬质合金结构与性能的影响·····吴冲浒，谢海唯，郑爱钦，肖满斗(2): 309-313

增强体含量对 TiC /316L 复合材料性能的影响·····················蔺绍江，熊惟皓，王赛玉，石其年(3): 373-378

气相SiO2对离子迁移谱仪用氨气缓释材料力学性能的影响···························王 晓，江海风，刘 蕊，何捍卫，武波涛，刘雪颖，周海生，解东梅，杨 良(3): 379-383

溶胶−喷雾干燥法制备的W-Cu纳米复合粉末的烧结致密化与晶粒长大·郭垚峰，范景莲，刘 涛，于 林(3): 384-389

热处理方式对 MIM Fe-50Ni合金磁性能的影响················朱彩强，符志坚，何 浩，熊 亮，李益民(3): 390-397

连续低速刹车对航空 C/C 复合材料摩擦性能的影响················王林丰，刘少军，吴华伟，黄伟明(3): 398-402

反应熔渗法制备C/C-ZrC复合材料的微观结构及烧蚀性能······但奇善，孙 威，熊 翔，王子璇，吴雯倩(3): 403-108

粉末粒径和压制压力对316L不锈钢多孔材料结构特性的影响···············································叶先勇，刘京雷，徐宏，颜 磊，郭 超，嵇得宸(3): 409-414

化学镀法制备Ni/TiH2复合粉末的显微组织及其Ni镀层的生长和作用机理···················································侯佳倩，肖来荣，余宸旭，宋宇峰，王 艳(3): 415-422

预变形对 Al-3.7Cu-1.6Mg 合金断裂韧性的影响········夏琳燕，刘志义，鲁璐青，夏 鹏，林 茂，周璇玮(3): 423-428

氧化镁稳定氧化锆纳米粉末的制备与物相分析·································单 科，郭兴敏(3): 429-433

溶胶−凝胶法制备掺杂纳米 TiO2粉末及其光催化性能········周志超，段学臣，朱奕漪，段文杰，刘杨林(3): 434-440

C/C-Cu 复合材料的微观结构与冲击性能·································谭 翠，张红波，尹 健(3): 441-446

燃烧反应合成钒铝碳材料·············································梁宝岩，张 洁，穆云超(3): 447-451

纯钼粉末-包套等径角挤压的多尺度研究······························李 萍，王 雪，薛克敏(3): 452-458

分散炭纤维对 C/C-SiC 复合材料压缩性能的影响··························曾志伟，肖 鹏，李 专(3): 459-464

Cu的添加方式对铁基预合金粉末与烧结体组织及性能的影响············································戴 赫，汪礼敏，王立根，王 磊，刘祥庆，党文龙(4): 510-515

反应球磨法制备 Zn(BH4)2及其放氢性能··························杨宝刚，李松林，姜圆圆，王 行(4): 516-521

一步还原法制备超细碳化钒铬粉末························姜中涛，李 力，陈 慧，刘 兵，陈巧旺(4): 522-526

轧制温度和变形量对Mo85-Cu复合材料组织和物理性能的影响······古 一，姜国圣，王志法，曾凡浩(4): 527-531

高能球磨制备 Cu-Cr纳米晶粉末···························史昆玉，沈 涛，陈春浩，薛丽红，严有为(4): 532-538

退火和氧化性酸处理对HFCVD法制备金刚石薄膜质量的影响·······翟 豪，龙 芬，余志明，王 健(4): 539-545

烧结温度对10TiB/Ti-4.5Al-6.8Mo-1.5Fe复合材料组织与性能的影响·····················································郑玉凯，蔡一湘，陈 峰，闫志巧，罗兵辉(4): 546-551

高能球磨法对 TiAl基合金表面的纳米化改性······················张明阳，李 昆，张 伟，姚天航(4): 552-559

超音速等离子喷涂 PZT 涂层及其表征······················顾林松，李国禄，王海斗，邢志国，徐滨士(4): 560-565

机械合金化结合热压制备高硅铝合金的组织及性能··········窦玉海，刘 咏，刘延斌，夏庆兵，徐 菲(4): 566-572

球形化处理铜锡粉末制备CuSn10含油轴承·····王聪聪，贾成厂，申承秀，王春官，常宇宏，盖国胜，杨玉芬(4): 572-578

明弧堆焊合金的内嵌 M23C6型碳化物及耐磨性·····················龚建勋，杨博翔，肖逸锋，许继青(4): 579-584

热解炭涂层对C/C复合材料高温氧乙炔焰烧蚀性能的影响·············································杨 鑫，苏哲安，黄启忠，柴立元，殷 腾，房 啸(4): 585-593

纯钼粉末包套−等径角挤压致密化行为·································李永志，于福义，白小波(4): 594-598

水热法制备Sn/C球复合材料及其电化学性能································季晶晶，王红强，张经济，韦钧光，杨观华，李 玉，李庆余，黄有国(4): 599-603

Ti-25Cu-15Ni钎料钎焊的 TA0 钛接头界面微观组织及拉伸性能······吴浩波，曾凡浩，陈江华，袁铁锤(4): 604-608

热压孕镶金刚石钻头偏磨的影响因素分析························谭松成，段隆臣，苟晓东，杨凯华(4): 609-614

SiO2表面改性炭纤维的抗氧化性能与微波吸收性能································唐益群，周克省，邓联文，肖 鹏，周 伟，周 亮，罗 衡，洪 文(4): 615-620

热压温度对30%SiCp/Al复合材料组织与力学性能的影响······郝世明，谢敬佩，王爱琴，王文炎，李继文(5): 655-661

喷涂工艺对超音速等离子喷涂BaTiO3涂层性能的影响········卢晓亮，李国禄，王海斗，邢志国，徐滨士(5): 662-668

机械合金化结合热压制备不同Si含量硅铝合金的摩擦磨损性能······窦玉海，刘 咏，刘延斌，夏庆兵(5): 669-674

自蔓延高温合成 Ti2SC 材料························梁宝岩，汪 乐，王志炜，李俊鹏，郭 猛，李孟洋(5): 675-679

多组元原位合成 TiC 颗粒增强钛基复合材料················罗 涛，刘伯威，刘 咏，刘延斌，刘 彬(5): 680-686

细晶粉末冶金 TiAl合金的制备··············································张俊红，曹钦存(5): 687-692

相组成对 SiO2-Al2O3-MgO-CaO-F−玻璃陶瓷力学性能的影响·····················逯 峙，刘 咏(5): 693-699

CuO 微/纳米结构的可控合成与红外性质·····································焦 华，王君龙(5): 700-705

热处理工艺对热等静压Ti-47Al-2Cr-2Nb-0.2W合金显微组织的影响············································宋 阳，李慧中，梁霄鹏，刘 咏，张丹阳，魏忠伟(5): 706-712

超高压通电烧结钨−金刚石复合材料及其导热性能·················钟 铭，周张健，谈 军，屈丹丹(5): 713-718

锆钛酸铅压电纤维及其复合材料的制备与表征··············商毅龙，林秀娟，张 野，庄后荣，张 斗(5): 718-722

高铝青铜等离子喷焊层的组织及抗热震性能····························李文生，王大锋，董洪峰(5): 723-728

凝胶注模−熔渗法制备 Mo-Cu 合金··················段柏华，洪海侠，王德志，刘辉江，谢春革，王 帅(5): 729-734

激光熔覆法制备 Al2CrFeCoxCuNiTi高熵合金涂层的组织与性能············邱星武，张云鹏，刘春阁(5): 735-740

易切削钢用低铋含量 Bi-Mn-Fe 合金的制备··············李节林，李 智，陈 洪，苏旭平，涂 浩，王建华(5): 741-747

B靶功率对ZrBN复合膜的微结构、力学性能及摩擦性能的影响·······喻利花，赵 强，马冰洋，许俊华(5): 748-753

C/C 复合材料环-块配副时的滑动摩擦磨损性能·············汪丽芳，葛毅成，武 帅，李 禅，杨凌云(5): 754-759

莫来石/SiC-Si3N4高温结构复相陶瓷的制备·················王克强，卢安贤，罗辉林，罗志伟，孔令娇(5): 760-767

炭纤维表面原位生长 CNT/CNF 及其生长机理···············徐先锋，洪龙龙, 肖 鹏，李 辉，卢彩涛(5): 768-774

微量Cu3P对Fe-2Ni-1Cu-0.6C粉末冶金材料组织与力学性能的影响···滕 浩，李志友，李佑福，周科朝(6): 801-806

轧制变形量对Al-Zn-Mg-Cu合金组织与力学性能以及腐蚀性能的影响··················································任伟才，彭国胜，陈康华，陈送义，刘显东(6): 807-813

乙酸对P110油管钢在H2S环境中腐蚀行为的影响······张艳可，易丹青，王 斌，邓殊皓，聂 灿，文 智(6): 814-820

Mn含量对Fe-Cu-Mn-C系烧结合金组织和性能的影响··胡 磊，肖志瑜，付文超，陆宇衡，陈 露，倪东惠(6): 821-826

包埋−化学气相沉积两步法制备ZrC涂层的结构与抗烧蚀性能·······吴 敏，李国栋，熊 翔，杨钢宜(6): 827-834

喷雾干燥与低温还原碳化法制备纳米晶WC-Co复合粉末············································吕 健，羊建高，陈 颢，郭圣达，戴 煜，朱二涛(6): 835-839

铝箔电化学与化学刻蚀对超级电容器性能的影响比较········周海生，何捍卫，洪东升，解东梅，杨 良(6): 840-845

Cr含量对退火态纳米晶Fe3Al材料晶粒尺寸和力学性能的影响············································师 婷，喇培清，魏福安，王鸿鼎，魏玉鹏，卢学峰(6): 846-850

单晶钨纳米片/带的气相合成及其力学性能·····陈国良，刘 俊，田 蜜，侯丽珍，贺跃辉，王世良，董虹星(6): 851-856

溶胶−凝胶法制备 Y0.06Sr0.94Ti1−xFexO3−δ混合导体材料的电性能···················单 科，郭兴敏(6): 857-861

溶剂热法制备 ITO 粉末的形貌与电导率····················肖桂英，段学臣，朱奕漪，段文杰，刘杨林(6): 862-868

V 含量对 ZrVCN 薄膜微结构及力学性能与摩擦性能的影响················马冰洋，喻利花，许俊华(6): 869-873

以丙三醇为还原剂的沉淀转化法制备超细银粉··············陈建波，李启厚，李玉虎，刘智勇，刘志宏(6): 874-881

水雾化 Mo2FeB2基硬质粉末的制备与表征························曾 鲜，郭志猛，陈 文，毛伟吉(6): 882-886

射频磁控溅射法制备钛基 HA 涂层的结构与生物活性···························王国卿，张乃生(6): 887-892

手工自蔓延立焊 Q235 钢接头的抗拉强度与断口微观形貌···········吴永胜，王建江，辛文彤，曲立峰(6): 893-898

2 种C/C 材料高温熔渗制备 C/C-SiC-ZrC 复合材料的力学性能········房 啸，苏哲安，黄启忠，杨 鑫(6): 899-905

W 含量对 ZrWN 复合膜的微结构与摩擦性能的影响················喻利花，赵 强，马冰洋，许俊华(6): 906-911

硝酸银溶液性质对超细银粉形貌与粒径的影响··············郭学益，焦翠燕，邓 多，田庆华，易 宇(6): 912-919

包套锻造粉末冶金TiAl基合金的高温力学性能··王 辉，贾文鹏，贺卫卫，刘 咏，朱纪磊，黄 瑜，赵 培(6): 920-925

微晶蜡含量对 17-4PH 不锈钢喂料流变性的影响···················杨忠臣，李笃信，卢仁伟，黎正科(6): 926-930

2013年第18卷卷终