Advanced materials

1. Effect of Sintering Temperature and Hydrophobic Treatment on the Microstructure and Properties of Copper-Graphite Composites
2. Simulations of Tapered Channel in Multilayer Graphene as Reverse Osmosis Membrane for Desalination
3. Preparation and Characterization of Alumina-coated Hollow Quartz Fiber Reinforced Al2O3-SiO2 Aerogel Composite
4. Protection Performance of Plasma Sprayed Al2O3-13 wt%TiO2 Coating Sealed with an Organic-inorganic Hybrid Agent
5. Self-assembled Cyclodextrin Metal-Organic Frameworks on Graphene Oxide as Filter Membrane for Tracelevel Naringin Pre-enrichment before Analysis
6. Structural Evolution of Graphene Oxide and Its Thermal Stability During High Temperature Sintering
7. Fe Nanoparticles Synthesized by Pomegranate Leaves for Treatment of Malachite Green
8. Metal-organic Frameworks Derived Cobalt Encapsulated in Nitrogen-doped Porous Carbon Nanosheets for Oxygen Reduction Reaction and Rechargeable Zinc-air Batteries
9. In-situ Synthesis of Cr3C2 Nanosheets by Carbon Reduction Route from Cr2AlC
10. Indenter Size Effect on Stress Relaxation Behaviors of Surface-modified Silicon:A Molecular Dynamics Study
11. A Duplex Grain Structure of Dense (K,Na)NbO3 Ceramics Constructed by Using Microcrystalline as Seed

Cementitious materials

1. Evaluation of Corrosion Inhibition of NO2- Intercalated LDHs on Steel Coated by Cement Paste
2. Abrasion Resistance of Cement Paste with Granulated Blast Furnace Slag and Its Relations to Microhardness and Microstructure
3. Influence of Nano-Materials on Mechanical and Permeation Characteristics of High Strength Concrete
4. The Synthetic and Mechanical Properties of a Silica Matrix Cermet Composite
5. Improvising the Self-Healing Capabilities of Concrete Using Different Pozzolanic Materials and Crystalline Admixtures
6. Mechanism of C4AF Content and Heat-curing Process on the Abrasion Resistance of High Ferrite Cement

Metallic materials

1. A Comparative Study on the Microstructures and Mechanical Properties of Two Kinds of Iron-Based Alloys by WAAM
2. Effect of Solution Treatment on Recrystallization,Texture and Mechanical Properties of 7A65-T74 Aluminum Alloy Super-thick Hot Rolled Plate
3. Fabrication and Characterization of TiAl Alloy by Fields Activated Sintering Technology (FAST)
4. Mechanical Performance and Micro-structure of Pore Steel Slag Block Prepared by Accelerated Carbonation
5. Influence of Formic Acid on Corrosion Behavior of Bronze under Thin Electrolyte Layer
6. Deformation Stability of GH4033 Superalloy in the Hot Continuous Rolling Process Based on Dynamic Material Model and Finite Element Model
7. Al-50 wt%Si Alloy by Spark Plasma Sintering (SPS) for Electronic Packaging Materials
8. Fatigue Crack Growth Behavior of Eutectoid Steel Rail
9. Effect of Hot-Plate Rolling on the Microstructure Evolution and Mechanical Properties of In-Situ Nano-TiCP/Al-Mg-Si Composites
10. Preparation and Composition Distribution in Hollow Tubular TiB-Ti Composites during Centrifugal Spraying Process

Organic materials

1. Silicone Modified Polyesters Vulcanizable at Room Temperature for Anti-corrosion Coatings on Tinplate
2. Synergistic Flame Retardant Effect of Ammonium Polyphosphate and Aluminum Hydroxide on Polyurethane
3. Temperature Effect on the Conformation Transition of Ultra-high Molecular Weight Polyethylene/Polypropylene Blends Undergoing Continuous Volume Extensional Flow:A Mesoscopic Simulation

1. The Crystallization and Fracture Toughness of Transparent Glass-ceramics with Various Al2O3 Additions for Mobile Devices
2. The Effect of Nd3+ Concentration on Upconversion Luminescence in Yb3+/Tm3+/Nd3+ Tripledoped β-NaGdF4 Nanocrystals