Advanced materials

1. Thermal Stability and Electrochemical Properties of Separators for Lithium-ion Batteries
2. Enhanced Electrochemical Performances of Ni Doped Cr8O21 Cathode Materials for Lithium-ion Batteries
3. Microstructure, Properties, and Grain Growth Kinetics of Mo-5Ta Refractory Sputtering Targets Prepared by SPS
4. Preparation of Co/CoOx Derived from a Lowtemperature Etching of ZIF-67 for Oxygen Reduction and Oxygen Evolution Catalytic Reaction
5. Enhancement of the Mechanical Performance of SiCf/Phenolic Composites after High-temperature Pyrolysis Using ZrC/B4C Particles
6. Effects of Co2O3 Addition on Microstructure and Properties of SiC Composite Ceramics for Solar Absorber and Storage
7. Tunable Emission and Energy Transfer of the Novel KY1-x(MoO4)2-y(WO4)y:xLn3+ (Ln3+ = Dy3+, Eu3+, and Tm3+)Single-phase White Luminescence Phosphor for White LEDs
8. Preparation and Mechanical Properties of Zirconia Ceramics Doped with Different Y2O3 Contents
9. Preparation of Chiral Silica Nanostructures with Radial Pores through Single-templating Approach
10. Bioprocess-inspired Actin Biomineralized Hematite Mesocrystals for Energy Storage
11. Energy-dispersive X-ray Spectroscopy for the Quantitative Analysis of Pyrite Thin Specimens
12. A Fiber Optic Sensor for the Simultaneous Measurement of Dual-parameter Based on Hydrogelimmobilized Enzyme Complex

Cementitious materials

1. Effect of Curing Age on Tensile Properties of Fly Ash Based Engineered Geopolymer Composites (FA-EGC) by Uniaxial Tensile Test and Ultrasonic Pulse Velocity Method
2. Preparation and Performance of Chitosan/Citric Acid Modified Magnesium Oxychloride Cement
3. Expansion Performance and Microstructure of High-performance Concrete using Differently Scaled MgO Agents and Mineral Powder
4. Research on the Low-carbon Cementitious Materials:Effect of Triisopropanolamine on the Hydration of Phosphorous Slag and Steel Slag
5. Effect of Hydrated Calcium Aluminate Cement on the Chloride Immobilization of Portland Cement Paste
6. The Effect of Wet-grinding on the Properties of Glass Powder and Its Application in Cement Based Materials
7. Pumpability of Manufactured Sand Self-compacting Concrete
8. Transformation of Coal Gangue to Sodalite and Faujasite Using Alkali-hydrothermal Method
9. Design on the Prestressed Concrete Frame Beam-column
10. Synthesis and Flocculation of Polyacrylamide with Low Water Absorption for Non-dispersible Underwater Concrete
11. Experimental Behavior of Recycled Aggregate Concrete Filled Steel Tubular Columns

Metallic materials

1. Flow Characteristics Analysis of TC18 Titanium Alloy during Hot Deformation Based on Phase Transformation
2. Impact-abrasive Wear Behavior of ZTA and NbC Reinforced Fe60 Matrix Composites
3. Synthesis and Characterization of Hollow Strontium Carbonate Pompons by Composite Soft Template Method
4. Hot Corrosion Resistance of TB8 Titanium Alloy after ECAP and Heat Treatment
5. Effect of Rare Earth Doping on the Tensile Properties of High Temperature Oxidation Coating
6. Preparation of Spherical Tungsten Particles Assisted by Hydrothermal Method
7. Characteristics and Weldability of Resistance Plug Welding of Dissimilar Steels
8. Microstructure Transformation and Refinement Mechanism of Undercooled Cu-Ni-Co Alloy Based on Simulation of Critical Cutting Speed in Ultrasonic Machining

Organic materials

1. Synthesis and Characterization of 9,9-diethyl-1-phenyl-1,9-dihydrofluoreno[2,3-d]imidazole-ended Fluorophores