目录
- Advanced hydrogen storage of the Mg-Na-Al system:A review
- Recent developments on corrosion behaviors of Mg alloys with stacking fault or long period stacking ordered structures
- Recent progress in in vivo studies and clinical applications of magnesium based biodegradable implants -A review
- Improving the wear resistance of plasma electrolytic oxidation (PEO)coatings applied on Mg and its alloys under the addition of nano-and micro-sized additives into the electrolytes:A review
- The tribological behavior of a surface-nanocrystallized magnesium alloy AZ31 sheet after ultrasonic shot peening treatment
- X-ray analysis of twin dominated deformation in an aged Mg-7Sn-3Zn-0.04Na alloy
- Grain refinemen of Mg-Al alloys inoculated by MgAl2O4 powder
- Microstructural evolution and grain growth mechanism of pre-twinned magnesium alloy during annealing
- Superhydrophobic fluorid conversion coating on bioresorbable magnesium alloy -fabrication,characterization,degradation and cytocompatibility with BMSCs
- Cooling rate controlled basal precipitates and age hardening response of solid-soluted Mg-Gd-Er-Zn-Zr alloy
- On investigating the soda-lime shot blasting of AZ31 alloy:Effects on surface roughness,material removal rate,corrosion resistance,and bioactivity
- Properties of polydimethylsiloxane hydrophobic modifie duplex microarc oxidation/diamond-like carbon coatings on AZ31B Mg alloy
- Effect of extrusion speed on microstructure and mechanical properties of the Mg-Ca binary alloy
- A novel approach to determine residual stress fiel during FSW of AZ91 Mg alloy using combined smoothed particle hydrodynamics/neuro-fuzzy computations and ultrasonic testing
- 3D-cubic interconnected porous Mg-based scaffolds for bone repair
- Effect of the Al-Si eutectic on the microstructure and corrosion behavior of the single-phase Mg alloy Mg-4Li
- The effect of powder size on the mechanical and corrosion properties and the ignition temperature of WE43 alloy prepared by spark plasma sintering
- Development and strengthening mechanisms of a hybrid CNTs@SiCp/Mg-6Zn composite fabricated by a novel method
- Femtosecond laser-mediated anchoring of polymer layers on the surface of a biodegradable metal
- Influenc of Ni interlayer on interfacial microstructure and mechanical properties of Ti-6Al-4V/AZ91D bimetals fabricated by a solid-liquid compound casting process
- Low-loss Cd-substituted Mg ferrites with matching impedance for high-frequency-range antennas
- Microstructure and surface texture driven improvement in in-vitro response of laser surface processed AZ31B magnesium alloy
- Electrochemical and corrosion behaviors of the wrought Mg-Y-Zn based alloys with high Y/Zn mole ratios
- Microstructure and mechanical and corrosion properties of hot-extruded Mg-Zn-Ca-(Mn) biodegradable alloys
- Corrosion resistance and superhydrophobicity of one-step polypropylene coating on anodized AZ31 Mg alloy
- Role of heat balance on the microstructure evolution of cold spray coated AZ31B with AA7075