Electronics and Electrical Engineering and Control

1. An internal power angle control strategy for highspeed sensorless brushless DC motors
2. Impact of receiver inter-frequency bias residual uncertainty on dual-frequency GBAS integrity
3. Target localization method of non-cooperative spacecraft on on-orbit service
4. Topology tracking of dynamic UAV wireless networks

Fluid Mechanics and Flight Mechanics

1. Assessment and improvement of k-ω-γ model for separation-induced transition prediction
2. Regularities between kinematic and aerodynamic characteristics of flexible membrane wing
3. Aerodynamic optimization of a high-lift system with adaptive dropped hinge flap
4. A three-equation transition model with mechanical considerations

Material Engineering and Mechanical Manufacturing

1. TFM imaging of aeroengine casing ring forgings with curved surfaces using acoustic field threshold segmentation and vector coherence factor
2. Leakage and wear characteristics of carbon seals for aero-engines
3. A novel low pressure-difference fluctuation electro-hydraulic large flowrate control valve for fuel flowrate control of aeroengine afterburner system
4. Soft landing stability analysis of a Mars lander under uncertain terrain

Solid Mechanics and Vehicle Conceptual Design

1. Research on disruptive design pre-identification in the preliminary design phase of aero engine flow pass multidisciplinary optimization
2. Pressure performance for a thin-walled ring and turbulent-jet orifice modeled elastic squeeze film damper
3. Study on dynamic stiffness of supporting structure and its influence on vibration of rotors
4. Safety lifetime analysis method for multi-mode time-dependent structural system
5. Parametric study on the flutter sensitivity of a wide-chord hollow fan blade

Reviews

1. Research progress of space non-pyrotechnic low-shock connection and separation technology(SNLT): A review
2. Rational design of self-powered sensors with polymer nanocomposites for human–machine interaction
3. Minimum quantity lubrication machining of aeronautical materials using carbon group nanolubricant: From mechanisms to application