目录
- Parameter effects on high-speed UAV ground directional stability using bifurcation analysis
- Supersonic flutter control and optimization of metamaterial plate
- Review of in-space assembly technologies
- Utilisation of turboelectric distribution propulsion in commercial aviation:A review on NASA’s TeDP concept
- The influence of inlet swirl intensity and hot-streak on aerodynamics and thermal characteristics of a high pressure turbine vane
- Full blended blade and endwall design of a compressor cascade
- Evolution of wall flow structure and measurement of shear stress issuing from supersonic jet with extended shelf
- Experimental research of active vibration and noise control of electrically controlled rotor
- Simplification approaches for multi-level load spectra by using equivalent damage rule
- In-situ observation and finite element analysis of fretting fatigue crack propagation behavior in 1045 steel
- Flight trajectory optimization of sun-tracking solar aircraft under the constraint of mission region
- A Poisson multi-Bernoulli mixture filter with spawning based on Kullback–Leibler divergence minimization
- An attack-immune trusted architecture for supervisory aircraft hardware
- Fixed-time position coordinated tracking control for spacecraft formation flying with collision avoidance
- Prescribed fast tracking control for flexible air-breathing hypersonic vehicles:An event-triggered case
- Onboard actuator model-based Incremental Nonlinear Dynamic Inversion for quadrotor attitude control:Method and application
- Influences of pulse frequency on formation and properties of composite anodic oxide films on Ti-10V-2Fe-3Al alloy
- Enhanced electrothermal effect of carbon fibrous composites decorated with high conductive carbon nanotube webs
- Microstructure evolution and mechanical anisotropy of M50 steel ball bearing rings during multi-stage hot forging
- An improved procedure for manufacture of 3D tubes with springback concerned in flexible bending process
- Excellent electromagnetic wave absorption of MOF/SiBCN nanomaterials at high temperature