目录
- Photoacoustic detection of follicular thyroid carcinoma using targeted Nano-Au-Tripods
- Effect of inlet area on the performance of a two-stage cyclone separator
- Recovery of lithium using H4Mn3.5Ti1.5O12/reduced graphene oxide/polyacrylamide composite hydrogel from brine by Ads-ESIX process
- Three-scale integrated optimization model of furnace simulation,cyclic scheduling,and supply chain of ethylene plants
- Insights into biobased epoxidized fatty acid isobutyl esters from biodiesel:Preparation and application as plasticizer
- Influences of fluid physical properties,solid particles,and operating conditions on the hydrodynamics in slurry reactors
- Numerical simulation of local and global mixing/segregation characteristics in a gas–solid fluidized bed
- Nb2O5 promoted Pd/AC catalyst for selective phenol hydrogenation to cyclohexanone
- Inhibition of hematite on acid mine drainage caused by chalcopyrite biodissolution
- The high catalytic activity and strong stability of 3%Fe/AC catalysts for catalytic wet peroxide oxidation of m-cresol:The role of surface functional groups and FeOx particles
- Performance of a synthetic resin for lithium adsorption in waste liquid of extracting aluminum from fly-ash
- Experimental and theoretical study on N-hydroxyphthalimide and its derivatives catalyzed aerobic oxidation of cyclohexylbenzene
- Measuring absolute adsorption in porous rocks using oscillatory motions of a spring-mass system
- Enhanced electrochemical performance of garnet-based solid-state lithium metal battery with modified anodic and cathodic interfaces
- Insights into high-efficient removal of tetracycline by a codoped mesoporous carbon adsorbent
- Ternary Ni2P/Bi2MoO6/g-C3N4 composite with Z-scheme electrontransfer path for enhanced removal broad-spectrum antibiotics by the synergistic effect of adsorption and photocatalysis
- Facile synthesis of metal-organic frameworks embedded in interconnected macroporous polymer as a dual acid-base bifunctional catalyst for efficient conversion of cellulose to 5-hydroxymethylfurfural
- Component analysis and risk assessment of biogas slurry from biogas plants
- Dynamic optimization of 1,3-propanediol fermentation process:A switched dynamical system approach
- Photocatalytic oxidative of Keggin-type polyoxometalate ionic liquid for enhanced extractive desulfurization in binary deep eutectic solvents
- Study of intermolecular interactions in binary mixtures of methyl acrylate with benzene and methyl substituted benzenes at different temperatures:An experimental and theoretical approach
- Enhanced straw fermentation process based on microbial electrolysis cell coupled anaerobic digestion
- Patterned catalyst layer boosts the performance of proton exchange membrane fuel cells by optimizing water management
- Lead removal from aqueous medium using fruit peels and polyaniline composites in aqueous and non-aqueous solvents in the presence of polyethylene glycol
- Separation of salidroside from the fermentation broth of engineered Escherichia coli using macroporous adsorbent resins
- Characterization and structure analysis of the heterosolvate of erythromycin thiocyanate
- Investigation on the effects of fluid intensification based preconditioning process on the decarburization enhancement of fly ash
- Evolution of copper nanowires through coalescing of copper nanoparticles induced by aliphatic amines and their electrical conductivities in polyester films
- Study on environmentally friendly refrigerant R13I1/R152a as an alternative for R134a in automotive air conditioning system
- Modification of FCC slurry oil and deoiled asphalt for making high-grade paving asphalt
- Optimization of continuous electrocoagulation-adsorption combined process for the treatment of a textile effluent
- Fluidization dynamic characteristics of carbon nanotube particles in a tapered fluidized bed
- Transparent and anti-fogging AlPO4-5 films constructed by oblique oriented nano-flake crystals
- Effect of additives on nickel-phosphorus deposition obtained by electroless plating:Characterization and corrosion resistance in 3%(mass) sodium chloride medium
- Construction of a Brönsted-Lewis solid acid catalyst La-PW-SiO2/SWCNTs based on electron withdrawing effect of La(III) on π bond of SWCNTs for biodiesel synthesis from esterification of oleic acid and methanol
- Simultaneous utilization of electro-generated O2 and H2 for H2O2 production:An upgrade of the Pd-catalytic electro-Fenton process for pollutants degradation
- Preparation and properties of Ni-W-P-TiO2 nanocomposite coatings developed by a sol-enhanced electroplating method
- Boosting low-temperature selective catalytic reduction of NOx with NH3 of V2O5/TiO2 catalyst via B-doping
- Solubility and metastable zone width measurement of 2,4-diaminobenzenesulfonic acid in (H2SO4+H2O) system
- A facile preparation of hausmannite as a high-performance catalyst for toluene combustion
- Simultaneous synthesis of heat-integrated water networks by a nonlinear program:Considering the wastewater regeneration reuse
- Computational fluid dynamics simulation of gas dispersion in complex facilities using Kit Fox field experiments:Validation and statistical evaluation
- Numerical investigation of grooves effects on the thermal performance of helically grooved shell and coil tube heat exchanger
- Gas cyclone-liquid jet absorption separator used for treatment of tail gas containing HCl in titanium dioxide industry
- Surfactant-assisted removal of 2,4-dichlorophenol from soil by zerovalent Fe/Cu activated persulfate
- Visualization on electrified micro-jet instability from Taylor cone in electrohydrodynamic atomization
- Theoretical and experimental assessment of a novel method to establish the complete measurement range of the calorimeter and its limit ofdetection and quantification
- Measurement and correlation of the solubility of sodium acetate in eight pure and binary solvents
- Computational study of bubble coalescence/break-up behaviors and bubble size distribution in a 3-D pressurized bubbling gas-solid fluidized bed of Geldart A particles
- Non-equilibrium thermodynamic analysis of coupled heat and moisture transfer across a membrane
- Modeling and simulation of material distribution in the sequential co-injection molding process
- A new approach for correlating of H2S solubility in [emim][Lac],[bmim][ac] and [emim][pro] ionic liquids using two-parts combined models
- A coupled CFD simulation approach for investigating the pyrolysis process in industrial naphtha thermal cracking furnaces