目录
Review
Article
- CFD simulations of quenching process for partial oxidation of methane:Comparison of jet-in-cross- flow and impinging flow configurations☆
- Quantifying growth and breakage of agglomerates in fluid-particle flow using discrete particle method☆
- Coupling simulation of fluid structure interaction in the stirred vessel with a pitched blade turbine☆
- An integrated model for predicting the flame propagation in crimped ribbon flame arresters☆
- Assessment of k-ε models using tetrahedral grids to describe the turbulent flow field of a PBT impeller and validation through the PIV technique
- Super-hydrophobic and super-lipophilic functionalized graphene oxide/polyurethane sponge applied for oil/water separation☆
- Solubility of red palm oil in supercritical carbon dioxide:Measurement and modelling
- Modelling of heat transfer for progressive freeze concentration process by spiral finned crystallizer
- Osmotic concentration of succinic acid by forward osmosis:Influence of feed solution pH and evaluation of seawater as draw solution
- Effect of the chelating agents on bio-sorption of hexavalent chromium using Agave sisalana fibers
- Effect of thermodynamic parameters on prediction of phase behavior and process design of extractive distillation☆
- Synthesis of activated carbon from spent tea leaves for aspirin removal
- Water-stable ZIF-300/Ultrason®mixed-matrix membranes for selective CO2 capture from humid post combustion flue gas
- Experimental and simulation study of nylon 6 solid-liquid extraction process☆
- High-performance phosphate supported on HZSM-5 catalyst for dehydration of glycerol to acrolein☆
- Kinetic contribution of CO2/O2 additive in methane conversion activated by non-equilibrium plasmas☆
- Effect of copper precursors on the catalytic performance of Cu-ZSM-5 catalysts in N2O decomposition☆
- Influence of dehydrating agents on the oxidative carbonylation of methanol for dimethyl carbonate synthesis over a Cu/Y-zeolite catalyst☆
- Catalyst-free and solvent-free oxidation of cycloalkanes(C5-C8)with molecular oxygen:Determination of autoxidation temperature and product distribution☆
- A sludge volume index(SVI)model based on the multivariate local quadratic polynomial regression method
- A risk-based methodology for the optimal placement of hazardous gas detectors☆
- Composition control and temperature inferential control of dividing wall column based on model predictive control and PI strategies☆
- Modeling and optimization of industrial Fischer-Tropsch synthesis with the slurry bubble column reactor and iron-based catalyst☆
- Effect of different additives on the phase separation behavior and thermodynamics of p-tert-alkylphenoxy poly(oxyethylene)ether in absence and presence of drug
- Temperature-dependent aggregation of bio-surfactants in aqueous solutions of galactose and lactose:Volumetric and viscometric approach
- The occurrence,fate,and distribution of natural and synthetic hormones in different types of wastewater treatment plants in Iran
- Adaptation of intestine-based microbial functions to bioethanol production
- Integration of high-solid digestion and gasification to dispose horticultural waste and chicken manure☆
- Enhanced electrokinetic remediation of cadmium-contaminated natural clay using organophosphonates in comparison with EDTA☆
- Thermodynamic behaviors of Cu in interaction with chlorine,sulfur,phosphorus and minerals during sewage sludge co-incineration☆
- Effect of industrial microwave irradiation on the physicochemical properties and pyrolysis characteristics of lignite☆
- An innovative trigeneration system using biogas as renewable energy
- Cr(III)removal from simulated solution using hydrous magnesium oxide coated fly ash:Optimization by response surface methodology(RSM)☆
- Antioxidant activity of phytosynthesized biomatrix-loaded noble metallic nanoparticles
- A simple strategy to synthesize and characterization of zirconium modified PCs/γ-Al2O3☆
- Thermal conductivity of PVDF/PANI-nanofiber composite membrane aligned in an electric field☆
- Morphological,mechanical and thermal properties of cyanate ester/benzoxazine resin composites reinforced by silane treated natural hemp fibers☆
- Controlling dispersion and morphology of MoS2 nanospheres by hydrothermal method using SiO2 as template☆